• 대한공간정보학회지
• /
• 제15권2호통권40호
• /
• pp.43-49
• /
• 2007

본 연구는 퍼지개념을 적용한 GIS 공간분석법을 도입하고 이를 통해 쓰레기 매립장 입지 평가를 수행하였다. 기존 연구는 GIS의 공간 중첩 분석법을 적용하여 입지분석이나 적지선정 등을 수행하였으나 공간 중첩분석은 보통집합의 불린 논리를 바탕으로 공간자료를 처리하였기 때문에 공간자료의 불확실성과 자료분류 기준의 부적합성을 고려하여 분석할 수 없었다. 그러므로 신뢰할 수 있는 분석결과를 제시할 수 없어 실제 문제에서 적극 활용되지 못하였다. 본 연구는 쓰레기 매립장을 대상 시설로 선정하고 객관적인 접근법으로 퍼지 공간분석 법을 적용하였으며, 구체적인 적용과정으로서 연속형 공간자료에 대한 소속함수의 정의방법과 퍼지분석을 위한 퍼지입력값의 생성, 그리고 쓰레기 매립장 입지평가를 위한 분석인자의 선정기준 및 자료분류기준을 검토하여 이것으로부터 소속함수를 결정하는 매개변수를 추출하는 방법을 제시하였다.

• 자원환경지질
• /
• 제32권2호
• /
• pp.177-187
• /
• 1999

Gravity, magnetic and VLF surveys were conducted to investigat the structural stability and hazards associated with the Ubong landfill in Pohang City, which has been built to dump industrial wastes. In 1994, the collapse of a bank happened in the 6th landfill site due to sudden heavy rain, and a large quantity of waste materials flowed out to the nearby landfill sites, factories and roads. We used $10{\times}10m$ resolution DEM data for gravity reductions. The maximum variation of the terrain effect in the survey area is about 0.5 mgal and the terrain effect is large in the vicinity of bank boundary. The Bouguer gravity anomaly map shows the effect due to the variatino of thickness and type of waste materials. The small negative gravity anomaly increases from the 9th site to the 6th site. The small negative gravity anomaly of the 9th site reflects the relatively shallow dumping depth of average 14.5 m in this site and increased density of waste materials by the repeated stabilization process of soil overlaying. The 6th site is located at the center of the former valley and rainfall and groundwater are expected to flow from south-east to north-west. Therefore, considering the previous accident of mixing waste and bank materials at the north-west boundary of the landfill, there may be some environmental problems of leakage of contaminated water and bank stability. The complex inversion technique using Simulated annealing and Marquardt-Levenberg methods was applied to calculate three-dimensional density distribution from gravity data. In the case of 6th site, it is apparent that the landfill had been dumped in four sectors. However, most part of the 9th site and showed that high magnetic industrial wastes were concentrated in the 6th site. The result of magnetic survey showing low magnetic anomalies along the boundaries of two sites is similar to that of gravity data. The VLF data also reveals four divided sectors in the 6th site, and overall anomaly trend indicates the directio of former valley.

• Journal of Community Nutrition
• /
• 제4권2호
• /
• pp.130-135
• /
• 2002

The purposes of this study were to quantify and compare the kind and amount of solid waste generated in two school foodservice operations located in urban and rural areas. A waste stream analysis was conducted to quantify and characterize the kind of waste in the production and service parts of each operation. The SPSS 10.0 for window was used for data analysis. Non-parametric test (Mann-Whitney) was adopted to determine if significant differences exist in amounts of waste generated in the urban school and the rural school. An average of 415 meals, including 43 adult meals, were served daily in the urban school, while an average of 177 meals, including 24 adult meals, were served daily in the rural school. Food waste generated in the production part in the urban school composed approximately 87% and 45%, while that in the rural school composed 71% and 28% by weight and volume, respectively. Waste per meal was not significantly different between the urban school and the rural school in the production part except the cardboard waste. The total waste per meal at lunch was 154g or 465m1 in the urban school and 51g or 334m1 in the rural school. Students in the urban school discarded significantly more food waste and milk than students in the rural school did. The research results suggest that school foodservice dietitians should evaluate the acceptability of menu items based on food waste per meal, and assess the feasibility of implementing a plan for recycling packaging waste and composting organic waste.

• 한국환경보건학회지
• /
• 제43권6호
• /
• pp.532-544
• /
• 2017

Objectives: Because the amount of medical waste (i.e., health-care waste) generated in Korea is rapidly increasing and social concern against its safety is widespread, a number of issues related with medical wastes are being discussed. The purpose of this study is to compare diverse medical waste management systems worldwide and propose future directions of a medical waste management system in Korea. Methods: Literature review was conducted mainly on the WHO, and developed countries such as the European Union (Germany, Belgium and UK), Japan and the United States. For these countries, the data with respect to their systems for medical waste management ranging from the definition of medical waste to the whole processes of collection, transportation and disposal were summarized and compared. Results: The terminology and classification of medical wastes were not consistent for WHO recommendation, EU, Japan, US and Korea. Comparison of the collection, storage, transportation and disposal of medical waste showed that Korea had rather stronger regulations for medical waste management compared to developed countries including Belgium (Flanders region), Germany, Japan and the US. Considering that developed countries adopt rather flexible disposal system especially for general medical wastes which pose lower possibility of infection, Korean government could consider diversifying disposal methods other than incineration. It may also be very important to try to reduce the amount of medical wastes and enough capacity for off-site incineration are secured. Conclusion: Our study of international comparisons suggests that it is necessary to continue to identify advantages and disadvantages of the current medical waste management systems and establish more effective one in Korea.

• 방사성폐기물학회지
• /
• 제15권3호
• /
• pp.281-299
• /
• 2017

핵종재고량 관리는 처분시설의 안전한 관리를 위해서는 필수적이다. 본 논문에서는 원자력발전소의 잡고체폐기물에 대하여 기존 발생된 폐기물 자료를 반영한 예측방사능량과 실제 처분시설을 운영하면서 인수되어 처분검사까지 완료된 실제방사능량을 비교분석하였다. 극저준위방사성폐기물에서는 $^{137}CS$, $^{90}Sr$, $^{99}Tc$ 그리고 $^{129}I$ 핵종이 예측방사능량보다 실제방사능량이 높게 평가되었으며, 저준위방사성폐기물에서는 모든 핵종에서 예측방사능량이 실제 방사능량보다 높게 평가되었다. 또한 척도인자에 의한 예측방사능량의 민감도 분석을 통해 준위별 수량 및 총방사능량의 변화추이를 분석하였다. 향후 중저준위방사성폐기물 처분시설의 안전한 운영과 Safety Case 구축을 위한 기초자료로 활용될 것으로 판단된다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2008년도 춘계 학술발표회 초청강연 및 논문집
• /
• pp.947-954
• /
• 2008

연약지반에 건설 운영되는 폐기물매립지는 매립하중으로 인하여 지반 및 사면파괴의 위험성을 내재하고 있다. 제한된 부지면적 내에서 안정성을 유지하며 최대의 매립용량을 확보하기 위해서는 당해 연약지반의 특성을 상세히 조사 이해하고, 폐기물의 매립특성 및 반입대상 폐기물의 반입조건 등을 파악하여 체계적이고 정량적인 안정관리를 위한 계측관리가 필요하다. 본 논문에서는 수도권매립지 제2매립지를 대상으로 계측자료를 이용하여 Tominaga-Hashimoto법, Kuriharh 법 등 매립장 안정관리를 정량적으로 할 수 있는 기법을 이용한 매립지 안정성여부를 분석하였다.

• Journal of Biosystems Engineering
• /
• 제37권2호
• /
• pp.100-105
• /
• 2012

Purpose: Methane production potential in aerobic digestion was assessed according to feed to inoculum (F/I) ratio for food waste only, and mixing ratio of two materials for food waste and swine manure to give a basic data for the design of anaerobic digestion system. Methods: Anaerbic digestion test was performed using a lab scale batch reactor at $35^{\circ}C$ for six different feed to inoculum (F/I) ratios (0.50, 0.72, 1.14, 1.50, 2.14 and 3.41), three food waste to swine manure ratios (100:0, 60:40 and 40:60) with two different loading concentrations (10g VS/L and 30g VS/L). Results: For food waste only, the highest biogas yield of 1008 mL/gVS was obtained at 0.50 of F/I. For the co-digestion of food waste and swine manure mixture, the highest biogas yield of 1148 mL/gVS was obtained at a mixing ratio of 40:60 with loading concentration of 10g VS/L. Conclusions: F/I ratio for the food waste only, mixing ratio of food waste and swine manure, and co-substrate loading rate affected the biogas production rate. For the low loading rate, there was not so much difference according to the mixing ratio of food waste and swine manure, but for the high loading rate higher biogas yield was acquired for the co-digestion of food waste and swine manure than for the food waste alone (mixing ratio, 100:0).

• 상하수도학회지
• /
• 제10권3호
• /
• pp.115-132
• /
• 1996

The present problems concerning the control of generation, storage, collection, transfer and transport, processing and disposal of the municipal waste are serious. And the transportation of the municipal waste is recently a important part of solid waste treatment and disposal. The waste pneumatic transportation system is expected to be an effective method for use in solving that problems. In this study, pneumatic transportation system was applied to 2,000-5,000 households of public/group housing for economic and technical analysis on the basis of data for working and operation. The proper equipment must be selected through economic and technical analysis for generation and properties of waste because the equipment in facilities of system is various. And the efficient operation method should be studied on the basis of information on the record of oeration. As the wet food waste clogs the pipeline, it is necessary to examine under the actual condition. The maximum unit waste generation rate based on the assumption that each household is comprised of 3.20 people is determined $2,340g/household{\cdot}day$, and it is included the 50% increase of seasonal and daily change.

• 한국환경보건학회지
• /
• 제37권2호
• /
• pp.150-158
• /
• 2011

This research was conducted to estimate the physicochemical characteristics of waste catalyst and its in-process product from recycling and to suggest fundamental data for religious systems such as quality standards. Mo and V contents were increased from the waste catalyst to calcinated material and oxidized material. In the results of a heavy metals leaching test, Pb was not detected in any catalyst, calcinated and oxidized materials. Cu was not detected in the catalyst. However, it was detected in ${\leq}$1.16 mg/l for calcinated material and in 1.34~13.73 mg/l for $MoO_3$ oxidezed material. Concentrations in recycling in-process products (calcinated and oxidized materials) were higher than those of waste catalyst. Oil content of catalyst waste ranged from 0.01-14.03 wt%. Oil contents of calcinated and oxidized materials were greatly decreased compared to the catalyst waste. Carbon and sulfur contents as chemical poisoning material of catalyst waste ranged from 0.33-76.08 wt% and 5.00-22.00 wt%, respectively. The carbon contents of calcinated and oxidized materials showed below 20 wt%. The sulfur content showed below 8wt% for calcinated material and below 0.22 wt% for oxidized material.

• 대한가정학회지
• /
• 제39권7호
• /
• pp.59-70
• /
• 2001

The study was designed to heap reduce daily household waste and promote the recycling of society's resources. the focus is on promoting environment-friendly activities and slevating a sense of nature-conscious domestic welfare, as well as providing wars to encourage garbage-savvy shopping, waste disposal by content and recycling. The thesis utilized demographic data obtained from 225 female homemakers and includes results based on frequency, ratio, mean, Duncan's Multiple range Test and Multiple Regression analysis. The main results are as follows: 1. Environmental consciousness appears to be higher than that of the adjustment of purchases to reduce waste and of recycling. Conversely more action seems to be taken on the waste disposal separation established since the launch of the volume-based waste collection fee system than on environmental education. 2. Homemakers with relatively higher environmental consciousness reciprocate with correspondent shopping habits, waste disposal eparation and recycling. Factors that influence daily waste reducing action include environmental consciousness homemaker employment status and the type of residence. 3. Activities reducing daily domestic wastes appear to effect a meaningful variable in explaining a sense of environmental welfare. The more respondents practice related shopping habits, waste disposal separation or recycling the more they recognize their living environment as desirable.