• 스마트미디어저널
• /
• 제8권3호
• /
• pp.53-61
• /
• 2019

본 논문에서는 카메라 및 다양한 센서가 복합되어 고속의 데이터를 다중으로 처리하는 성능을 요구하는 전자광학장비의 안정적인 데이터 전송을 위해 Event 기반의 동기화 방식을 통한 Multi-Thread 환경의 다중 통신 미들웨어 설계 및 구현 방법을 제안하였다. 구현된 통신 미들웨어의 성능 검증을 위해 영상 데이터 및 센서 데이터를 전송하여 송신 주기 대비 수신 주기에 대한 차이를 비교하고, 다중으로 전송 및 처리할 수 있는 최대 통신 가능 수를 측정 및 분석하였다. 또한 전송되는 데이터의 무결성 검증과 Round Trip Time 측정 등의 실험을 통해 제안하는 통신 미들웨어의 성능을 검증하였다.

• 한국컴퓨터정보학회논문지
• /
• 제23권11호
• /
• pp.59-66
• /
• 2018

Data Distribution Service(DDS) provides the communications service programmers need to distribute time-critical data between embedded and/or enterprise devices or nodes. In this paper, I propose efficient methods for transmitting and receiving messages of various characteristics in real-time using DDS middleware. For high-frequency characteristic data, I describe several DDS packet types and various default and extended DDS QoS policies. In particular, the batching method is probably the best solution when considering several performance aspects. For large-capacity characteristic data. I will show a method using extended DDS QoS policies, a segmentation and reassembly method, and transmitting and receiving a large-capacity data with low priority method considering network conditions. Finally, I simulate and compare the result of performance for each methods. This results will help determine efficient methods for transmitting and receiving messages of various characteristics using DDS middleware.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2017년도 춘계학술대회
• /
• pp.738-740
• /
• 2017

가시광 통신은 빛을 사용한 통신방식이며, RF 통신에 비해 단일 공간 내 보안성을 보장하는 장점이 있다. 하지만 빛의 가시선을 벗어난 영역의 경우 통신단절 현상이 발생한다. 이에 본 논문에서는 가시광 통신의 커버리지 확장과 통신단절 현상을 극복하기 위해 릴레이 모듈을 제안한다. 제안하는 릴레이 모듈은 target ID를 포함한 데이터 패킷을 인접한 가시광 모듈을 통해 순차적으로 전달함으로써 데이터를 송수신한다. 데이터 전송 실험을 통해 전송범위의 확장과 가시선을 벗어난 영역에서의 데이터 수신을 확인하였다.

• Journal of Information Processing Systems
• /
• 제13권2호
• /
• pp.348-359
• /
• 2017

Nowadays most vehicles are equipped with a variety of electronic devices to improve user convenience as well as its performance itself. In order to efficiently interconnect these devices with each other, Controller Area Network (CAN) is commonly used. However, the CAN requires reconfiguration of the entire network when a new device, which is capable of supporting both of transmission and reception of data, is added to the existing network. In addition, since CAN is based on the collision avoidance using address priority, it is difficult that a new node is assigned high priority and eventually it results in transmission delay of the entire network. Therefore, in this paper we propose a new system component, called CAN coordinator, and design a new CAN framework capable of supporting plug and play functionality. Through experiments, we also prove that the proposed framework can improve real-time ability based on plug and play functionality.

• 한국통신학회논문지
• /
• 제22권7호
• /
• pp.1403-1410
• /
• 1997

Because streaming mode connection server suitable to wide area ATM networks performs transmission, reception and lookup with time restriction for the transmission time of a cell, it has demerits of large cell loss incase that burst traffic occurs. Therefore, in this paper to decrease cell loss we propose a high speed CAM (Content Addressable Memory) which is capable of processing data of streaming mode connections server at a high speed. the proposed CAM is applied to forwarding table VPC map which performs function to output connection numbers about input VPI(Virtual Path Identifier)/VCI(Virtual Channel Identifier). The designed high speed CAM consist of DBL(Dual Bit Line) CAM structure performed independently write operation and match operation and two-port SRAM structure. Also, its simulation verification and full-custom layout is performed by Hspice and Composs tools in 0.8 .$\mu$m design rule.

• Journal of information and communication convergence engineering
• /
• 제8권4호
• /
• pp.393-398
• /
• 2010

For multi-cell environments, coordinated random beamforming technique in multiuser MIMO(multiple-input multiple-output) broadcast channel is considered. In order to mitigate severe interference at receivers, the multi-cell environments might require complex transmitter and receiver design because the scheduler decision based on full channel state information (CSI) in one cell must be intertwined with decision made by other cells' CSI. With limited CSI, however, this paper considers a scheme of randomizing transmitters' beamforming but being coordinated with other cell transmitters. The transmitters in each cell share random beamforming patterns and schedule data transmission within coherent scheduling period. The corandomized beams allow the users to be selected with the highest SINRs even in multi-cell environments. We analyze the performance of the proposed scheme. And numerical results show that the scheme achieves better performance than the conventional random beamforming when applying to multi-cell environments.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2010년도 춘계학술대회
• /
• pp.956-958
• /
• 2010

The paper considers MIMO two-way scheme to optimize the end to end capacity in local wireless mesh network. The basic idea is to perform data transmission via intermediate cooperative nodes and cooperative relay therefore higher throughput can be achieved. Each node is equipped with multiple antennas, and has two time slots one for transmission (Tx) and the other is reception (Rx), which are arranged alternatively in the network. In the conventional SISO network, it takes at least four time slots to accomplish the function of two-way relay. Moreover, cooperative technique is used in order to enhance multiplexing of forward and backward streams.

• Journal of Positioning, Navigation, and Timing
• /
• 제11권2호
• /
• pp.135-146
• /
• 2022

In GNSS, the structure of the navigation message has been improved to increase the flexibility of data addition and transmission, and the robustness of message reception in a low SNR environment. GNSS signals currently being broadcast have a different message structure from each other, and the structure can be largely classified into the fixed structure, the packetized structure, and the packetized and fixed pattern structure. This paper analyzes the features of these three types of structures and compares the performance using the indicators. It can be seen that the performance after adopting the packetized structure is superior to those of other structures. In particular, there has been remarkable improvement in terms of the message management and transmission efficiency.

• 한국통신학회논문지
• /
• 제16권8호
• /
• pp.770-784
• /
• 1991

본 연구에서는 유럽방송연맹 규격의 라디오 데이터 시스템 수신기 개발을 위하여 그의 소수신 구성과 데이터 구조에 대하여 연구하였다. 5가지 기본 기능처리를 위한 프로그램을 개발하여쏘 자동 동조와 lcd 표시부 구성에 관하여 실험하였다. 기존의 FM 차량용 수신기와 완전 양립성을 확보하였으며, 그의 실현을 하드웨어 실험을 통하여 확인하였다.

• 전자공학회논문지A
• /
• 제33A권2호
• /
• pp.50-58
• /
• 1996

This paper proposes the channel-access protocol suitable to a very high speed photonic WDM network with star configuration, which can provide a high channel utilization and insensitivity to the propagation delay. The proposed protocol employs a control channel and a simple status table to deal with the propagation delay which has been a major limiting factor in the performance of the very high speed optical communication networks. The control channel transmits control information in order to reserve access on data channels, and each node constitutes a status table after the reception of control pckets which holds information about the availbility of destination node and data channel. The proposed protocol is insensitive to the propagation delay time by removing necessity of the retransmission and by allowing parallel transmission of control packet and data packets. It is proved in analysis and discrete event simulation that the proposed protocol is superior in throughput and mean delay, especially at the high load conditions compared to the existing high speed channel-access protocols.