• 센서학회지
• /
• 제25권2호
• /
• pp.131-137
• /
• 2016

In this study, a multilevel visible light communication (VLC) system based on resistor ladder circuit is designed to transmit medical data. VLC technology is being considered as an alternative wireless communication due to various advantages such as ubiquity, license free operation, low energy consumption, and no radio frequency (RF) radiation characteristics. With VLC even in places where traditional RF communication (e.g., Wi-Fi) is forbidden, significant bio-medical signal including the electrocardiography (ECG) and photoplethysmography (PPG) data can be transmitted. More lives could be saved anywhere by this potential advantage of VLC with a fast emergency response time. A multilevel transmission scheme is adopted to improve the data capacity with keeping simplicity, where data transmission rate can increase by log2m times (m is the number of voltage levels) than that of conventional VLC transmission based on on/off keying. In order to generate multi-amplitudes, resistor ladder circuit, which is a basic principle of digital to analog convertor, is employed, and information is transferred through LED (Light-Emitting Diode) with different voltage level. In the receiver side, multilevel signal is detected by optical receiver including a photo diode. Then, the collected data are analyzed to serve the necessary medical care to the concerned patient.

• 한국통신학회논문지
• /
• 제31권9A호
• /
• pp.878-883
• /
• 2006

발전된 형태의 통신망 제공은 광대역 멀티미디어 서비스를 가능하게 하고 있다. 네트워크 기반 지능형 이동 로봇 서비스가 새로운 서비스 중의 하나이다. 이때 네트워크 로봇을 원격으로 제어하기 위해서는 실시간 신뢰성 있는 로봇제어 데이터 전송이 필요하다. 본 연구에서 UDP 프로토콜에 기반을 둔 로봇 제어 데이터의 효과적인 전송기법을 제안한다. 제안한 기법은 로봇 제어 데이터에 우선순위를 부여하고 기지국에서 로봇 제어 데이터를 중복으로 전송하는 것이다. NS-2 모의실험을 통하여 제안한 제어데이터 전송 프로토콜 방법은 전송지연시간이 적으며 패킷 손실율도 매우 적음을 보인다.

• 디지털산업정보학회논문지
• /
• 제13권2호
• /
• pp.43-51
• /
• 2017

Recently, MANET has been used in many fields as the range of applications increases. However, the dynamic topology that MANET has makes it difficult to route and provides the cause of exposure to security vulnerabilities. Therefore, the security features that can be robust to many attacks must have been applied in the routing technique provided in the MANET. In this paper, we propose a secure routing method that secure route is established by reliability evaluation of nodes and secure data communication has applied through key exchange mechanism. The proposed technique used hierarchical structure for efficiency of reliability evaluation of nodes. The reliability of nodes is performed by trust management node and reliability of nodes managed periodically is broadcasted. And the key exchange for secure data transmission is dene without CA as the certificate issuing organization. This allows fast key exchange and the integrity of data transmission improved. The proposed technique improves the security of the data transmission because a secure route to the destination node is established by the reliability evaluation and the data transmission is performed after the key between the source node and the destination node is exchanged through the established route.

• Journal of Information Processing Systems
• /
• 제7권2호
• /
• pp.241-260
• /
• 2011

In earlier days, most of the data carried on communication networks was textual data requiring limited bandwidth. With the rise of multimedia and network technologies, the bandwidth requirements of data have increased considerably. If a network link at any time is not able to meet the minimum bandwidth requirement of data, data transmission at that path becomes difficult, which leads to network congestion. This causes delay in data transmission and might also lead to packet drops in the network. The retransmission of these lost packets would aggravate the situation and jam the network. In this paper, we aim at providing a solution to the problem of network congestion in mobile ad hoc networks [1, 2] by designing a protocol that performs routing intelligently and minimizes the delay in data transmission. Our Objective is to move the traffic away from the shortest path obtained by a suitable shortest path calculation algorithm to a less congested path so as to minimize the number of packet drops during data transmission and to avoid unnecessary delay. For this we have proposed a protocol named as Congestion Aware Selection Of Path With Efficient Routing (CASPER). Here, a router runs the shortest path algorithm after pruning those links that violate a given set of constraints. The proposed protocol has been compared with two link state protocols namely, OSPF [3, 4] and OLSR [5, 6, 7, 8].The results achieved show that our protocol performs better in terms of network throughput and transmission delay in case of bulky data transmission.

• 대한원격탐사학회지
• /
• 제15권3호
• /
• pp.209-216
• /
• 1999

독자기술에 의한 소형위성 개발이라는 목표아래 지난 4년 반에 걸쳐서 개발된 우리별 3호가 성공적으로 발사되었다. 초기운용 기간동안 위성의 각 서브시스템에 대한 시험이 있었으며 모든 서브시스템에 대한 시험이 있었으며 모든 서브시스템이 설계된 바와 같이 정상적으로 동작함을 검증할 수 있었다. 이 기간동안 우리별 3호에 탑재된 카메라가 수십회 지구를 촬영하여 그 데이터를 지상으로 송신하고 수신된 영상데이터를 분석하여 카메라 및 송수신 시스템의 성능을 분석할 수 있었다. 본 논문에서는 우리별 3호의 다대역 지구관측 센서 영상의 촬영, 데이터 송신, 수신 및 저장시스템을 소개하고 위성 초기운용 시 시험했던 영상데이터 송수신 시스템의 성능을 기술한다. 수신시스템은 개발 시 주어졌던 1% 미만의 전송에러를 만족하였으며 앞으로 지속적인 시스템 시험 및 안정화를 통해서 이러한 수신시스템의 에러율은 최소화 될 것이다.

• KEPCO Journal on Electric Power and Energy
• /
• 제7권1호
• /
• pp.73-77
• /
• 2021

As the big data analysis technologies has been developed worldwide, the importance of asset management for electric power facilities based data analysis is increasing. It is essential to secure quality of data that will determine the performance of the RISK evaluation algorithm for asset management. To improve reliability of asset management, asset data must be preprocessed. In particular, the process of cleaning dirty data is required, and it is also urgent to develop an algorithm to reduce time and improve accuracy for data treatment. In this paper, the result of the development of an automatic cleaning algorithm specialized in overhead transmission asset data is presented. A data cleaning algorithm was developed to enable data clean by analyzing quality and overall pattern of raw data.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2000년도 춘계학술대회논문집
• /
• pp.33-43
• /
• 2000

In order to streamline the procedure of data transmission in port and logistics industries, MOMAF introduced EDI systems as the method of data transmission of 19 documents 5 years ago. While operating EDI system, MOMAF has found the inconvenience and the inefficiency of using EDI systems in the field of requesting fast response. This thesis focuses on finding the possible fields of on-line processing system instead of EDI system and suggests the economic effects occurred by the on-line processing system. The result of the paper presents that if data transmission area such as 'ocean vessel entrance report', 'application for using tug boat'and 'application for pilot'is changed to on-line processing method, the processing cost and time will be reduced compared with EDI processing method.

• 한국위성정보통신학회논문지
• /
• 제11권3호
• /
• pp.72-79
• /
• 2016

본 논문에서는 낮은 위성채널 대역폭을 이용한 서비스 적응적인 전술 데이터 전송 프로토콜(STTS, Service-adaptive Tactical-data Transport Stream)을 제안한다. STTS는 기존 디지털 방송 표준인 DVB-S 및 DVB-S2의 전송 스트림 표준을 기반으로 서비스 확장성을 위한 추가 필드 및 신뢰성 보장을 위한 스케줄러를 제공하도록 설계된다. 또한, 다양한 전술 데이터를 낮은 대역폭으로 전송하기 위해서 트래픽 모델과 중요 데이터의 재전송 기능이 데이터 전송 패킷 손실에 미치는 영향을 시뮬레이션을 통하여 검증하고, 이를 기반으로 STTS를 적용한 시스템 설계 시 고려할 사항을 확인한다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 하계종합학술대회 논문집(3)
• /
• pp.47-50
• /
• 2002

In this paper, the efficient transmission technique of real time video data over 3G wireless networks is presented. To understand the transmission characteristic of 3G networks on real time video data, we implemented the data transport structure of 3G wireless networks. Also this research is based on current 3G wireless network specification of 3GPP, 3GPP2 standard organization to evaluate the result over real 3G wireless network environment. The retransmission by radio link layer results in the delay factor. To implement video data transmission efficiently, we Propose to use both no-retransmission and forward error correction method.

• 한국생산제조학회지
• /
• 제9권6호
• /
• pp.9-18
• /
• 2000

This study includes noise automatic inspection system for washing machine auto-transmission one of modern home necessary. We effort to find and certificate sound noise source by sound power and sound intensity, and apply to frequency analysis in vibration related sound noise. still more we have been studying to data acquisition and programming for MS VisualBasic version 5.0. System component is below. 1) Pentium PC or data acquisition. 2) DSO for noise acquisition. 3)S/W for comparison and decision. 4) I/F Board for data communication. Wave form data through the DSO are converting to ASCII code data. The ASCII code through binary converting S/W. Finally we will making noise monitoring system and automatic inspection system.