• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.11
• /
• pp.224-229
• /
• 2018

Korea is experiencing a rapid increase in electricity consumption due to rapid economic development, and many power transmission towers are installed to provide smooth power supply. The high-voltage transmission line is mainly made of aluminum stranded wire, and the wire is loosely guided so that some deflection is maintained. The degree of deflection has a great influence on the quality of the construction and the life of the cable. As the time passes, the shrinkage and expansion occur repeatedly due to the weight of the cable and the surrounding environment. Therefore, periodic monitoring is essential for the management of the power transmission line. In this study, the power transmission lines were monitored using 3D laser scanning technology. The data of the power transmission line of the study area was acquired and the point cloud type 3D geospatial information of the transmission line was extracted through data processing. The length of the transmission line and deflection amount were calculated using the 3D geospatial information of the transmission line, and the distance from the surrounding obstacles could be calculated effectively. The result of study shows the utilization of 3D laser scanning technology for transmission line management. Future research will contribute to the efficiency of transmission line management if a transmission line monitoring system using 3D laser scanning technology is developed.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2011.06a
• /
• pp.583-584
• /
• 2011

• Spatial Information Research
• /
• v.14 no.3 s.38
• /
• pp.321-334
• /
• 2006

3D spatial data are of increasing interest in landscape analysis, urban planning and map services based on Web, because of its reality. But the amount of 3D spatial data are very large in comparison with 2D spatial data. Therefore it is necessary to have a efficient methods to transfer and visualize 3D spatial data. The concept of Level of Detail in Computer Graphics is effective. This paper briefly presents two LOD data models of data transmission based on the spatial data model of international standards. First, it is separated LOD model that gives a LOD level to object. Second is Selective LOD model that gives a LOD level to object's element. We compared the efficiency of 3D data transmission based on two LOD model.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2018.05a
• /
• pp.574-575
• /
• 2018

The generation of redundant data according to the spatial-temporal correlation in a wireless sensor network that reduces the network lifetime by consuming unnecessary energy. In this paper, data collection experiment through the particulate matter sensor is carried out to confirm the spatial-temporal data redundancy and we propose permitted limit setting method for data transmission to solve this problem. In the proposed method, the data transmission permitted limit is set by using the integrated average value in the cluster. The set permitted limit reduces the redundant data of the member node and it is shows that redundant data reduction is possible even in a variable environment of collected data by resetting the permitted limit in the cluster head.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.7 no.3
• /
• pp.471-489
• /
• 2013

Data compression at the transport layer could both reduce transmitted bytes over network links and increase the transmitted application data (TCP PDU) in one RTT at the same network conditions. Therefore, it is able to improve transmission efficiency on Internet, especially on the networks with limited bandwidth or long delay links. In this paper, we propose an on-the-fly TCP data compression scheme, i.e., the TCPComp, to enhance TCP performance. This scheme is primarily composed of the compression decision mechanism and the compression ratio estimation algorithm. When the application data arrives at the transport layer, the compression decision mechanism is applied to determine which data block could be compressed. The compression ratio estimation algorithm is employed to predict compression ratios of upcoming application data for determining the proper size of the next data block so as to maximize compression efficiency. Furthermore, the assessment criteria for TCP data compression scheme are systematically developed. Experimental results show that the scheme can effectively reduce transmitted TCP segments and bytes, leading to greater transmission efficiency compared with the standard TCP and other TCP compression schemes.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.3A
• /
• pp.198-204
• /
• 2011

Acoustic communication system is a transmission technology sending sound and data simultaneously. However, data signal can be audible in this system when data is transmitted with high transmission power. The more transmission power is reduced, the more distance that can transmit data is shortened. Therefore, the study that increase the transmission distance is needed. In this paper, we would like to increase transmission distance by adapting receive diversity in acoustic communication system. We measure received performance of both proposed system and Single Input Sing Output (SISO) system according to distance with same transmission power. When SISO satisfies Bit Error Rate (BER) of $7{\times}10^{-3}$ at about 2m, Selection Combining (SC) technique satisfies 2 meters, and Equal Gain Combining (EGC) technique satisfies 4 meters.

• Journal of IKEEE
• /
• v.12 no.2
• /
• pp.81-86
• /
• 2008

In wireless communication system using 2.4GHz radio link, data rate varies with time due to interferences, which causes the performance degradation. Therefore, effective transmission methods are required to obtain better performance according to varying data rate. This paper proposes a novel method that increases the data rate, as well as the influence of different loop-filter bandwidths on the performance of the PLL. Experimental results show that the proposed method is effective because it can achieve higher throughput in various data rate.

• The KIPS Transactions:PartC
• /
• v.14C no.3 s.113
• /
• pp.285-292
• /
• 2007

In the adaptable bandwidth allocation technique, a transmission plan for variable rate video data is made by the CBA algorithm and the data is transmitted by considering network traffic. But the CBA algorithm produces a transmission plan where the size of the increasing interval of transmission rate is generally larger than the size of the decreasing interval. And the transmission rate in CBA algorithm is changed in overflow curve during the increasing interval of transmission rate. This ぉy cause many frames to be discarded when available transmission rate is small. In this paper, a smoothing algorithm is proposed, where transmission rate is changed in the middle of underflow curve and overflow curve, but the transmission rate increases at the minimum. In order to show the performance, the proposed algorithm and a CBA algorithm were applied to a transmission plan in the adaptable bandwidth allocation technique, and the minimum frame rates, the average frame rates, the variation of frame rates, and the numbers of discarded frames were compared in both algorithms.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.9 no.5
• /
• pp.943-950
• /
• 2005

Recently, many of researches on stream transmission for satisfying each of different real-time transmission condition of the multimedia data that demands various service quality through high-speed networks have been studied actively. In this paper, we design a scheme that discriminately reserves the network resources for the transmission of each multimedia application and propose a bandwidth allocation scheme for improving the utilization ratio of free resources. And we also propose a pipelining scheme for providing flexible real-time transmission. The proposed schemes can be used to support a real-time transmission by applying feedback transmission control method based on receiving buffer for guaranteeing the synchronization conditions requested by the multimedia data. Moreover, we propose a transmission control scheme that can take the amount of network resources down to the minimum amount within the range of permissible error-range under the guarantee with no quality degradation simultaneously when the bottleneck is caused by the network congestion. Finally, we propose a dynamic bandwidth smoothing scheme that can smooth the maximum bandwidth to the demand of each video steam for giving continuous transmission to the delay sensitive video steam between senders and receivers.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.26 no.11
• /
• pp.1679-1685
• /
• 2022

In this paper, we propose an optimal multi-hop transmission scheme to maximize the end-to-end data rate from the source to the destination node in a wireless powered communication network. The frame structure for multi-hop transmission is presented to transmit multi-hop data while harvesting energy. Then, the transmission time of each node that maximizes the end-to-end transmission rate is determined through mathematical analysis in consideration of different harvested energy and link quality among nodes. We derive an optimization problem through system modeling of the considered wireless powered multi-hop transmission, and prove that there is a global optimal solution by verifying the convexity of this optimization problem. This analysis facilitates to find the optimal solution of the considered optimization problem. The proposed optimal multi-hop transmission scheme maximizes the end-to-end rate by allocating the transmission time for each node that equalizes the transmission rates of all links.