• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.63 no.12
• /
• pp.1675-1682
• /
• 2014

In this paper, we propose a precise time management and time synchronization based on real-time data storage and transmission scheme in design of seismic data acquisition system for urban earthquake disaster preventing system (UEDPS). It is possible to improve the performance of the existing research results through the proposed methods. To evaluate the performances of the proposed methods, we implemented a prototype system(H/W & S/W) and performed some experiments with real seismic data and test equipment generated data as the input.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38A no.10
• /
• pp.827-832
• /
• 2013

Holographic data storage system is affected by two dimensional intersymbol interference and inter-page interference. Especially, for multi-level holographic data storage system, since one pixel contains more than 1 bit, the system is more vulnerable to the error. In this paper, we propose a 2/3 modulation code for 4-level holographic data storage system. The proposed modulation code with error correcting capability could be compensated these interferences. Also, in this paper, we proposed a Viterbi decoder for 2/3 modulation code. The proposed Viterbi decoder eliminates unnecessary calculation. As a result, proposed 2/3 modulation code and Viterbi decoder has shown better performance than conventional one.

• Journal of the Korean Solar Energy Society
• /
• v.29 no.2
• /
• pp.1-7
• /
• 2009

Use of the PV(photovoltaic) generation system is increased in such areas as remote mountain places or islands at which electrical energy is not serviced. The stand alone PV system is required the power storage products such as battery, fly wheel and super capacitor. Several lead storage batteries are connected in series to get high voltages. The life of lead storage battery is shortened when over charge or over discharge takes place. So, it is needed to control batteries not to be overcharged or be discharged deeply. Voltage of each battery was ignored in former control methods in which overall voltage was used to control charge or discharge battery. In this study, the charging and discharging voltage variations of sealed lead storage batteries with l2V/l.2A were investigated step by step experiments. The results of the test show that one should consider and specify the state of each battery to prevent overcharge or deep discharge. With the basis of the experiments, we designed a monitoring unit to monitor battery voltages simultaneously using micro-controller. The unit measures voltage of 20 batteries simultaneously and displays data on the color LCD monitor with curved line graph. It also sends data to PC using the RS232C communication port. The designed unit was adapted to stand alone PV system with 1kW capacity and lead storage batteries are connected to the PV generation system. The number of lead storage batteries was 10 in series and 12V/250Ah each. Resistive load with 3kW was used for discharging.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.25 no.5
• /
• pp.653-659
• /
• 2001

This paper is concerned with the development of a new method for making and separating ice in-water and saving floated ice by installing an evaporation panel in an ice storage tank. The new method shows very good heat transfer efficiency than that of the convectional method. It is because the evaporation panel is directly contacted with water in the storage tank. The experiments were performed by varying inlet and outlet refrigerant temperatures of its evaporator. From the experimental results, the operating characteristics of in-water harvest-type ice storage system were investigated by measuring temperature and pressure at each point of the ice storage system and power required to operating compressor respect to the changes of the inlet and outlet refrigerant temperature of evaporator. It can be think that defrost frequency decreased and heavy ice created as the refrigerant temperature of evaporator outlet and defrost setting temperature is low so gotten result can effect to release efficiency. Also, consumption power, condensing heat quantity, refrigerating capacity and performance efficiency decreased as time goes by. Therefore, these results provide the basic data for system optimization, performance improvement and the possibility of application to other fields.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.47 no.2
• /
• pp.29-38
• /
• 2010

Network Video Recorder becomes popular as a next generation surveillance system connecting all cameras and video server in network environment because it can provide ease of installation and efficient management and maintenance. But in case of data damage, the storage device in traditional NVR has no recovery scheme and it is disabled in processing real-time requests. In this paper, we propose an Reliable Storage using Parity and Mirroring scheme for improving reliability on storage device and maintaining system on realtime. RSPM uses a Liberation coding to recover damaged multimedia data and dynamic mirroring to repair corrupted system data and to maintain real-time operation. RSPM using the Liberation code is 11.29% lesser than traditional file system and 5.21% less than RSPM using parity code in terms of loss rate of damaged multimedia data.

• Korea Trade Review
• /
• v.46 no.4
• /
• pp.149-166
• /
• 2021

This paper aims to reduce the frequency of dangerous goods storage accidents in China. Advocating the managers of warehousing and logistics enterprises to pay attention to the operation process of dangerous goods warehousing business. Improving the safe storage and management capabilities of dangerous goods warehouses. This article first collects official data on dangerous goods storage accidents in China and conducts a general statistical analysis of the accidents. Based on the results of accident statistics and related literature research on dangerous goods storage management, establish a dangerous goods storage safety management factor system, use the analytic hierarchy process, establish a factor importance questionnaire and implement data collection. Through statistics, this paper finds that the storage accidents of dangerous goods in China in the past ten years mainly occurred in the inbound phase of dangerous goods and the storage phase of dangerous goods warehouses. Through the results of the analytic hierarchy process, it is found that the professionalism of the dangerous goods storage practitioners, the compliance of the practitioners with safety regulations, and the awareness of operational safety are the most important.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.7 no.6
• /
• pp.345-351
• /
• 2012

In traditional target-based data deduplication system, all of the files should be chunked and compared for reducing duplicated data blocks. One of the critical problem of this system arises as the number of files are increasing. The system suffers from computational delay for calculating hash value and processing metadata for handling each file. To overcome this problem, in this paper, we propose a novel data deduplication system using logical partition of storage system. The system applies data deduplication scheme to each logical partition not each file. Experiment result shows that the proposed system is more efficient compared with traditional deduplication scheme where the logical partition is full of files by 50% in terms of deduplication capacity and processing time.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.6 no.4
• /
• pp.293-298
• /
• 2006

Thermopiezoelectric method, using poly silicon heater and a piezoelectric sensor, was proposed for writing and reading in a probe based data storage system. Resistively heated tip writes data bits while scanning over a polymer media and piezoelectric sensor reads data bits from the self-generated charges induced by the deflection of the cantilever. 34${\times}$34 array of thermopiezoelectric nitride cantilevers were fabricated by a single step wafer level transfer method. We analyzed the noise level of the charge amplifier and measured the noise signal. With the sensor and the charge amplifier 20mn of deflection could be detected at a frequency of 10KHz. Reading signal was obtained from the cantilever array and the sensitivity was calculated.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2005.05a
• /
• pp.338-341
• /
• 2005

This paper proposes a control system for a Galvano meter which can be used in angle multiplexing for a holographic data storage. Due to the small angle multiplexing selectivity and the exposure/delay time of a CCD camera, the system needs to be controlled to satisfy the performance specification. First, the mathematical model is derived by combining the electrical and mechanical dynamic equations. Then, the obtained model was tuned by the experiments. Finally, a PID controller using DSP was designed and was applied the holographic system. From this approach, we successfully meet the performance specification.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.13 no.4
• /
• pp.247-256
• /
• 2008

Regenerative energy generated by regenerative braking of DC traction can cause the system malfunction or damage to the rectifier, or malfunction of the power conversion device in power supply system by DC Line voltage rise in feeder line. Regenerative energy storage system using super capacitor is one of the ways to stabilize DC line voltage. In this paper, energy storage system of DC traction system using super-capacitor bank is implemented and using the field measurement data of the station N and the station S on the Line 2, the operation characteristics of line voltage caused by regenerative energy of electric trains are verified. Also, charge/discharge characteristics of super capacitor are verified as well. Thus, we can verify the operation characteristics of super-capacitor bank for regenerative energy storage system installed in DC Traction. And if we can use field measurement data of DC line voltage, we have obtained cost reduction. The stabilization of the system will be improved by measuring the operation characteristics of regenerative energy storage system in certain section operated by DC traction and predicting the capacity and lifetime of super-capacitor.