• Journal of Climate Change Research
• /
• v.1 no.3
• /
• pp.189-203
• /
• 2010

The objective of this study is the estimate of $CO_2$ emissions by the energy consumption of functional technology introduced by classifying energy use in households according to functions as well as energy resources. This study also intends to provide the practical basis data in order to establish specific alternatives for GHG mitigation in residential sector with examining the cause analysis affecting $CO_2$ emission increases from 1995 to 2007. The results of this study show a 6.6% increase in the total $CO_2$ from 60,636 thousand tons in 1995 to 64,611 thousand tons in 2007 by using energy in residential sector. Heating is the greatest $CO_2$ emission sector by use, followed electric appliances, cooking, lighting and cooling. Heating sector shows 56.6% reductions from 71.5% in 1995 and as do cooling and electric home appliances, with a 2.4% increase from 0.6% and a 21.8% increase from 14.2% respectively. To analyze factors resulted in $CO_2$ emissions in residential sector, the relevant indicator change rate from 2005 to 2007 was examined. The results find that population, the number of household, housing areas, family patterns, and family income resulted in the $CO_2$ emissions increase in residential sector from 1995 to 2007. On the other hand, carbon intensity and energy intensity contribute to $CO_2$ reduction in residential sector with -2% and -38.7% respectively because of the energy conversion and the improvement of energy efficiency in electronic appliances. This study can be used as a reference when taken account of the reality and considered the introduction of highly effective measures to increase the possibility of mitigation potential in residential sector hereafter.

• Tunnel and Underground Space
• /
• v.28 no.6
• /
• pp.670-691
• /
• 2018

This study presents the research results of the BMT(Benchmark Model Test) simulations of the DECOVALEX-2019 project Task B. Task B named 'Fault slip modelling' is aiming at developing a numerical method to predict fault reactivation and the coupled hydro-mechanical behavior of fault. BMT scenario simulations of Task B were conducted to improve each numerical model of participating group by demonstrating the feasibility of reproducing the fault behavior induced by water injection. The BMT simulations consist of seven different conditions depending on injection pressure, fault properties and the hydro-mechanical coupling relations. TOUGH-FLAC simulator was used to reproduce the coupled hydro-mechanical process of fault slip. A coupling module to update the changes in hydrological properties and geometric features of the numerical mesh in the present study. We made modifications to the numerical model developed in Task B Step 1 to consider the changes in compressibility, Permeability and geometric features with hydraulic aperture of fault due to mechanical deformation. The effects of the storativity and transmissivity of the fault on the hydro-mechanical behavior such as the pressure distribution, injection rate, displacement and stress of the fault were examined, and the results of the previous step 1 simulation were updated using the modified numerical model. The simulation results indicate that the developed model can provide a reasonable prediction of the hydro-mechanical behavior related to fault reactivation. The numerical model will be enhanced by continuing interaction and collaboration with other research teams of DECOVALEX-2019 Task B and validated using the field experiment data in a further study.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.14 no.1
• /
• pp.139-149
• /
• 2019

The purpose of this study is to contribute to the minimization of the social cost due to the insolvency by improving the success rate of the startups by providing useful information to the founders and the start-up support institutions through analysis of non-financial information affecting the failure of the startups. This study is aimed at entrepreneurs. The entrepreneurs that are defined by the credit guarantee institutions generally refer to entrepreneurs within 5 years of establishment. The data used in the study are sampled from the companies that were supported by the start-up guarantee from January 2014 to December 2013 as the end of December 2017. The total number of sampled firms is 2,826, 2,267 companies (80.2%), and 559 non-performing companies (19.8%). The non-financial information of the entrepreneur was divided into the entrepreneur characteristics information, the entrepreneur characteristics information, the entrepreneur asset information and the entrepreneur 's credit information, and cross-tabulations and logistic regression analysis were conducted. As a result of cross-tabulations, univariate analysis showed that personal credit rating, presence in the industry, presence of residential housing, presence of employees, and presence of financial statements were selected as significant variables. As a result of the logistic regression analysis, three variables such as personal credit rating, occupation in the industry, and presence of residential house were found to be important factors affecting the failure of founding companies. This result shows the importance of entrepreneur 's personal credibility and experience and entrepreneur' s assets in business management. The start-up support institutions should reflect these results in the entrepreneur 's credit evaluation system, and the entrepreneurs need training on the importance of the personal credit and the management plan in the entrepreneurial education. The results of this analysis will contribute to the minimization of the incapacity of startups by providing useful non-financial information to founders and start-up support organizations.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.63 no.4
• /
• pp.273-281
• /
• 2018

Wet hill seeding (WHS) is one of the more famous labor and money saving methods technology used for rice cultivation. In WHS, rice standing percentage and weedy rice occurrence are the most important factors considered to secure a rice yield. We investigated the optimum seeding date of WHS in the Southern Plain area of South Korea. Weedy rice needed two weeks at $15^{\circ}C$ to show over 80% emergence. Germinated rice seed grown at $20^{\circ}C$ needed over for 10 days to achieve a shoot length over 3 cm. In field cultivation, the mean temperature for ten days after seeding showed a highly positive correlation with rice standing rate, spikelet number per square meter and yield index that favorably compared to machine transplanting. With these data, we suggest that the optimum seeding date of WHS that can secure over 98% of yield index of machine transplanting in Southern part of Korea is May. 21~Jun. 5 in Honam and May. 16~Jun. 5 in Yeongnam area.

• Journal of Food Hygiene and Safety
• /
• v.34 no.4
• /
• pp.340-347
• /
• 2019

We performed a safety survey on residual pesticides in dried agricultural products. A total of 110 samples of dried agricultural products distributed in Gyeonggi-do were analyzed for 263 pesticides according to multi class pesiticide multiresidue method. Ten types of pesticides were detected in 10 samples. Chlorpyrifos was detected in Ricinus communis leaves, chlorpyrifos, hexaconazole, pyridalyl in Chwinamul (wild aster), diniconazole, isoprothiolane, lufenuron in radish leaves, hexaconazole in Cirsium setidens (Korean thistle), bifenthrin, and chlorothalonil, boscalid, and pyraclostrobin in pepper leaves. The detection rate of pesticides was 9.1%, and among these samples, one was detected over Maximum Residue Limits (MRLs). In the validation study, the values of limit of detection (LOD), limit of quantitation (LOQ), coefficient of determination ($R^2$) and recovery were in the range of 0.002~0.027 mg/kg, 0.006~0.083 mg/kg, 0.9964~1.0000 and 74.8~118.9%, respectively. The Positive List System (PLS) was newly introduced as part of the safety management of residual pesticide in agricultural products in Korea in 2019. With the application of the PLS, if the MRL is not established, 0.01 mg/kg limit is applied uniformly. In spite, these of strengthened residue limits, the MRLs of dried agricultural products are still insufficient. Therefore, this study could be utilized as basic data for the setting of proper MRLs.

• Journal of the Korean earth science society
• /
• v.40 no.3
• /
• pp.227-239
• /
• 2019

Heavy snowfall events frequently occur in the Gangwon province, and the snowfall amount significantly varies in space due to the complex terrain and topographical modulation of precipitation. Understanding the spatial characteristics of heavy snowfall and its prediction is particularly challenging during snowfall events in the easterly winds. The easterly wind produces a significantly different atmospheric condition. Hence, it brings different precipitation characteristics. In this study, we have investigated the microphysical characteristics of snowfall in the windward and leeward sides of the Taebaek mountain range in the easterly condition. The two snowfall events are selected in the easterly, and the snow particles size distributions (SSD) are observed in the four sites (two windward and two leeward sites) by the PARSIVEL distrometers. We compared the characteristic parameters of SSDs that come from leeward sites to that of windward sites. The results show that SSDs of windward sites have a relatively wide distribution with many small snow particles compared to those of leeward sites. This characteristic is clearly shown by the larger characteristic number concentration and characteristic diameter in the windward sites. Snowfall rate and ice water content of windward also are larger than those of leeward sites. The results indicate that a new generation of snowfall particles is dominant in the windward sites which is likely due to the orographic lifting. In addition, the windward sites show heavy aggregation particles by nearby zero ground temperature that is likely driven by the wet and warm condition near the ocean.

• Korean Journal of Environment and Ecology
• /
• v.33 no.4
• /
• pp.378-401
• /
• 2019

This study generated a list of plants in eight sections from the Baekdansa ticket office (874m) to Cheonjedan (1,560m) divided in the interval of 100m above sea level to examine the species diversity patterns and distribution changes of the vascular plants at different altitudes in Taebaeksan National Park. Four site surveys found a total of 385 taxa: 89 families, 240 genera, 345 species, 5 subspecies, 34 varieties, and 1 form. A result of analyzing the change of species diversity along elevational gradients showed that it decreased with increasing elevation and then increased from a certain section. A result of analyzing habitat affinity types showed that the proportion of forest species increased with increasing elevation. On the other hand, the ruderal species appeared at a high rate in the artificial interference section. A result of comparing the proportion of woody and herb plants showed that the woody plants gradually increased with elevation and rapidly decreased in the artificial interference section. On the other hand, the herb plants showed the opposite trend. A result of analyzing the change of distribution of species according to altitude with the DCA technique showed that the vascular plants were divided into three groups according to the elevation in order on the I axis with the boundaries at 900m and 1,300m above sea level. The arrangement of each stand from right to left along the altitude on the I axis with a significant correlation with warmth index (WI) confirmed that the temperature change along the altitude could affect the distribution of vascular plants, composition, and diversity. Therefore, the continuous monitoring is necessary to confirm ecological and environmental characteristics of vegetation, distribution ranges, changes of habitat. We expect that the results of this study will be used as the basic data for establishing the measurement measures related to the preservation of biodiversity and climate change.

• Korean Journal of Environment and Ecology
• /
• v.33 no.4
• /
• pp.472-480
• /
• 2019

Selection of the plant material for planting to reduce fine dust should comprehensively consider the visual characteristics, such as the shape and texture of the plant leaves and form of bark, which affect the adsorption function of the plant. However, previous studies on reduction of fine dust through plants have focused on the absorption function rather than the adsorption function of plants and on foliage plants, which are indoor plants, rather than the outdoor plants. In particular, the criterion for selection of fine dust reduction species is not specific, so research on the selection criteria for plant materials for fine dust reduction in urban areas is needed. The purpose of this study is to identify the priorities of eight indicators that affect the fine dust reduction by using the fuzzy multi-criteria decision-making model (MCDM) and establish the tree selection criteria for the urban planting to reduce fine dust. For the purpose, we conducted a questionnaire survey of those who majored in fine dust-related academic fields and those with experience of researching fine dust. A result of the survey showed that the area of leaf and the tree species received the highest score as the factors that affect the fine dust reduction. They were followed by the surface roughness of leaves, tree height, growth rate, complexity of leaves, edge shape of leaves, and bark feature in that order. When selecting the species that have leaves with the coarse surface, it is better to select the trees with wooly, glossy, and waxy layers on the leaves. When considering the shape of the leaves, it is better to select the two-type or three-type leaves and palm-shaped leaves than the single-type leaves and to select the serrated leaves than the smooth edged leaves to increase the surface area for adsorbing fine dust in the air on the surface of the leaves. When considering the characteristics of the bark, it is better to select trees that have cork layers or show or are likely to show the bark loosening or cracks than to select those with lenticel or patterned barks. This study is significant in that it presents the priorities of the selection criteria of plant material based on the visual characteristics that affect the adsorption of fine dust for the planning of planting to reduce fine dust in the urban area. The results of this study can be used as basic data for the selection of trees for plantation planning in the urban area.

• Food Engineering Progress
• /
• v.21 no.4
• /
• pp.318-325
• /
• 2017

Alcoholic steatosis is a fundamental metabolic disorder and may precede the onset of more severe forms of alcoholic liver disease. In this study, we isolated enzymatichydrolysate from Semisulcospira libertine by alcalase hydrolysis and investigated the protective effect of Semisulcospira libertine hydrolysate on liver injury induced by alcohol in the mouse model of chronic and binge ethanol feeding (NIAAA). In an in vitro study, the hydrolysate protects HepG2 cells from ethanol toxicity. Liver damage was assessed by histopathological examination, as well as by quantitating activities of serum aspartate aminotransferase (AST), alanine aminotransferase (ALT), and alkaline phosphatase (ALP). After the administration of S. libertina hydrolysate, fat accumulation and infiltration of inflammatory cells in liver tissues were significantly decreased in the NIAAA mouse model. The elevated levels of serum AST, ALT, and ALP activities, along with the lipid contents of a damaged liver, were recovered in experimental mice administrated with S. libertina hydrolysate, suggesting its role in blood enzyme activation and lipid content restoration within damaged liver tissues. Moreover, treatment with S. libertine hydrolysate reduced the expression rate of cyclooxygenase (COX-2), interleukin $(IL)-1{\beta}$, and IL-6, which accelerate inflammation and induces tissue damage. All data showed that S. libertine hydrolysate has a preventive role against alcohol-induced liver damages by improving the activities of blood enzymes and modulating the expression of inflammation factor, suggesting S. libertine hydrolysate could be a commercially potential material for the restoration of hepatotoxicity.

• Journal of the Korean Society of International Agriculture
• /
• v.30 no.4
• /
• pp.328-338
• /
• 2018

Central Asia (Uzbekistan, Kazakhstan, Kyrgyzstan) is a hot and arid continental climate, with most areas (68%) consisting of barren vegetation, desert, and meadows. The main agricultural areas for crop production include irrigated farmland, non-irrigated farmland, grassland, prairie and mountain. We are experiencing climate change with recent climate variability increasing. Agriculture is one of major economic sectors and provides a means of livings for the rural population of Central Asia, especially the poor. In the past two decades, Central Asia has experienced a high population growth rate, with Kazakhstan at 16.8%, Uzbekistan at 34.5% and Kyrgyzstan at 28.4%. As a major industry, Kazakhstan has the largest share of exports of agricultural products followed by petroleum, mineral resources, steel, and chemicals. Uzbekistan is the fifth largest cotton exporter as well as the sixth largest cotton producer in the world. Kyrgyzstan exports ores, stones, cultured pearls, and minerals. These three countries are rich in mineral resources, agricultural products, and energy resources. However, not only do they have difficulties in economic development due to the weakness of logistics and industrial infrastructure, but they also have imperceptible cooperation and investment among countries due to insufficient research and development. Through this study, we will investigate national outlook, economic indicators, major agricultural products, import and export status, and agricultural technology cooperation status, and study how Korean agricultural industry advances into these countries through SWOT analysis. Through this, we hope to contribute to the basic data of Central Asian studies and cooperation and investment in agriculture in each country. In addition, in order to increase cooperative exchange and investment in these countries, we will prepare a Central Asia logistics hub for the rapidly changing interKorean railroad era.