• Korean Journal of Clinical Pharmacy
• /
• v.23 no.2
• /
• pp.123-128
• /
• 2013

Purpose: The aim of study was to investigate the racial or ethnic differences in FDA-approved medications. Methods: Data on racial-based differences of drugs in PDR (Physician's Desk Reference) were analyzed by searching with keywords, "ETHNIC" and "RACE". Results: There were descriptions related to "ETHNIC" in product directions of 53 cases and "RACE" in 266 cases in 2010 PDR. After excluding 30 cases of duplicates, 289 cases were shown of which 28 cases were verified to demonstrate racial or ethnic differences. Drug category showing the higher racial or ethnic differences was cardiovascular drugs (7), followed by alimentary tract and metabolism drugs (6), nervous system drugs (5), and antineoplastic and immunomodulating agents (3). Pharmacokinetic differences between race and ethnicity were observed most frequently; differences in AUC or Cmax showed in 15 drugs and clearance differences in 7 drugs. Conclusions: This study identified the racial differences in medication usage in PDR. Therefore, the results can contribute to safe use of medication in real clinical settings in regards to the racial or ethnic differences.

• Journal of the Korean Society of Tobacco Science
• /
• v.22 no.1
• /
• pp.7-12
• /
• 2000

This study was conducted to identify useful germ plasm sources of resistance to black shank, Phytophthora. parasitica, in Nicotiana tabacum and to characterize the interaction between host plant resistance to black shank and pathogen variability. The six internationally represen-tative set of black shank resistant and susceptible tobacco genotypes and four Korean lines were tested for black shank on the field infested with P. parasitica at Chonju Experiment Station, Korea Ginseng & Tobacco Research Institute during the 1992～1997 growing season. Almost 100% of the plants of the most susceptible genotype, Ky 14, did not survive. Complete survival of (MS Ky 14 x L8)F$_1$, which is resistant to reee 0 and ausceptible to reace 1, suggests that Race 0 is the only race of the P. parasitica in this bield. Coker 371 Gold and Beinhart 1000-1 having excellent resistance to black shank could be recommended as the parental cultivars for improving black shank resistance in Korea. Data of the diseased plants showed that KB 101 and KB 110 were medium high resistant and KB 103 and KB 108 being low resistant to black shank.

• Transactions of Materials Processing
• /
• v.3 no.3
• /
• pp.282-290
• /
• 1994

The outer race of BJ type C.V.Joint has a complicated shape and ball grooves. It is produced by cold or warm precision forging. Especially, the precision level of the ball grooves determines the quality of the part. The objective of the present study is to develop process conditions of the cold forging using the plasticine. Because the cold forging consists of forward extrusion, upsetting, backward extrusion and cold sizing, the study was focused on finding the best perform for each process. The data obtained from the study will be used in the design of the cold forging process for the outer race.

• Asian Pacific Journal of Cancer Prevention
• /
• v.14 no.12
• /
• pp.7133-7136
• /
• 2013

Background: We studied Surveillance, Epidemiology and End Results (SEER) breast cancer data of Georgia USA to analyze the impact of socio-economic factors on the disparity of breast cancer treatment outcome. Materials and Methods: This study explored socio-economic, staging and treatment factors that were available in the SEER database for breast cancer from Georgia registry diagnosed in 2004-2009. An area under the receiver operating characteristic curve (ROC) was computed for each predictor to measure its discriminatory power. The best biological predictors were selected to be analyzed with socio-economic factors. Survival analysis, Kolmogorov-Smirnov 2-sample tests and Cox proportional hazard modeling were used for univariate and multivariate analyses of time to breast cancer specific survival data. Results: There were 34,671 patients included in this study, 99.3% being females with breast cancer. This study identified race and education attainment of county of residence as predictors of poor outcome. On multivariate analysis, these socio-economic factors remained independently prognostic. Overall, race and education status of the place of residence predicted up to 10% decrease in cause specific survival at 5 years. Conclusions: Socio-economic factors are important determinants of breast cancer outcome and ensuring access to breast cancer treatment may eliminate disparities.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2006.05a
• /
• pp.399-402
• /
• 2006

The outer race of CV(constant velocity) joint is an important load-supporting automotive part, which transmits torque between the transmission gear box and driving wheel. The outer race is difficult to forge because its shape is very complicated and the required dimensional tolerances are very small. Traditional warm and cold forging methods have their own limitations to produce such a complex shaped part; warm forging requires complex system with relatively higher manufacturing cost, while cold forging is not applicable to materials with limited formability. Therefore, multistage forging may be advantageous to produce complex shaped parts. In order to build a multistage forging system, it is necessary to characterize mechanical properties in response to system design parameters such as temperature, forging speed and reduction. For the analysis of formability of multistage forging process, finite element method(FEM) has been used for the process analysis. As a model case, a constant velocity (CV) joint forging process is analyzed by FEM, since CV joint has a complex shape and also its required dimensional tolerances are very tight. The data acquired by FEM is compared with operational forging data obtained from an industrial production line. Based on this comparative analysis, multistage forging process for CV joints is proposed.

• International Journal of Safety
• /
• v.1 no.1
• /
• pp.28-35
• /
• 2002

Kullback Discrimination Information (KDI) is one of the pattern recognition methods. KDI defined as a measure of the mutual dissimilarity computed between two time series was studied for detection and classification of bearing flaking on outer-race and inner-races. To model the damages, the bearings in normal condition, outer-race flaking condition and inner-races flaking condition were provided. The vibration sensor was attached by the bearing housing. This produced the total 25 pieces of data each condition, and we chose the standard data and measure of distance between standard and tested data. It is difficult to detect the flaking because similar pulses come out when balls pass the defection point. The detection and classification method for inner and outer races are defected by KDI and nearest neighbor classification rule is proposed and its high performance is also shown.

• The KIPS Transactions:PartA
• /
• v.9A no.4
• /
• pp.525-534
• /
• 2002

Race conditions, races in short, need to be detected for debugging parallel programs, because the races result in unintended non-deterministic executions. To detect the races in an execution of program, previous techniques use a centralized data structure which may incur serious bottleneck in generating concurrency information, or show inefficient time complexity which depends on the degree of nested parallelism in comparing any two of them. We propose a new labeling scheme in this paper, which is scalable in generating the concurrency information without bottleneck by using private data structure, and improves time complexity into constant in checking concurrency. The scalability and time efficiency therfore makes on-the-fly race detection efficient not only for programs with either shared-memory or message-passing, but also for programs with mixed model of the two.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.5
• /
• pp.311-321
• /
• 2019

This study was conducted to investigate the relationship between motivation, stress and flow in bicycle race gambling. To accomplish this, data were collected from gambling users of a bicycle velodrome. A total of 347 samples were employed for analysis. The collected data were analyzed through multiple regression analysis. The results of the analysis were as follows. First, the level of flow increased as the motivation for participating in the contest increased. Second, the influence of the motivation to participate in the race on immersion showed that a higher motivation to participate in the race was associated with a higher level of stress. Third, verification of the motive for participating in the race and the mediated effect of immersion between stress revealed that immersion had a mediated effect on stress. Based on the results of these analyses, practical and policy implications were suggested. Accordingly, there is a need to identify the motivation for career participation in counseling of experienced gamblers. Moreover, it is important to establish a system to prevent excessive gambling flow.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2006.05a
• /
• pp.211-214
• /
• 2006

The outer race of the constant velocity(CV) joint is an important load-supporting automotive part, which transmits torque between the transmission and the wheel. The outer race is difficult to forge, because its shape is very complex and the required dimensional tolerances are very stringent. Therefore, the internet based shape inspection system is developed in this study to provide quick and accurate data through the easy control from users. Proposed system uses mechanical displacement sensors to measure the shape of CV joint that has six inner ball grooves, and commercially available Lab-View program is used to process measured data into the dimensional shape. Developed program provides a simple user interface that enables users real-time access of data measured from industrial production lines. Furthermore, it can exchange measured data via the internet between users and forging system operators. A java applet helped the system connection via internet. A data, IP access, is transmitted to the packet by TCP/IP. Our proposed system has many advantages over current measuring systems including fast and efficient data processing by real-time control, and system flexibility.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2016.07a
• /
• pp.1-2
• /
• 2016

다중 스레드 기반 병렬 프로그램에서의 자료경합 탐지는 동시에 수행되는 스레드 간의 비결정적인 상호작용 때문에 탐지하기 어려운 것으로 잘 알려져 있다. 동적 분석기술을 사용하여 자료경합을 탐지할 경우 프로그램 수행의 감시와 충돌하는 모든 메모리 연산의 분석을 위해 추가적인 오버헤드가 발생한다는 단점이 있다. 이러한 동적 분석의 추가적인 오버헤드를 줄이는 방법으로 감시 필터링 기술이 소개되고 있으며, 본 논문에서는 동적 자료경합 탐지를 위한 감시 필터링 기술 중 OpenMP 디렉티브 병렬 프로그램에 적용 가능한 두 기술을 대상으로 실용성과 효율성을 실험적으로 비교한다.