• International Journal of Contents
• /
• 제4권4호
• /
• pp.7-11
• /
• 2008

This paper embodies the agent based cinder monitoring system which supports PDA{Personal Digital Assistant). Monitoring system automatically manages data by using data managing agents such as a state managing agent, a location managing agent, a badness managing agent, a circumstances managing agent, etc, and uses a massive data processing agent to manage massive data. The development of agent based data monitoring system for the stable cinder reuse will be an epoch-making method to develop the process mechanized or manual-labored that widely spreads into the real-time automated process.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1997년도 한국자동제어학술회의논문집; 한국전력공사 서울연수원; 17-18 Oct. 1997
• /
• pp.1516-1519
• /
• 1997

With disseminationof Distributed Control Systems(DCS), the huge amounts of process operation data could have been available and led to figure out process behaviors better on the statistical basis. Until now, the statistical modeling technology has been susally applied to process monitoring and fault diagnosis. however, it has been also thought that these process information, extracted from statistical analysis, might serve a great opportunity for process operation improvements and process improvements. This paper proposed a general methodolgy for process operation improvements including data analysis, backing up the result of analysis based on the methodology, and the mapping physical physical phenomena to the Principal Components(PC) which is the most distinguished feature in the methodology form traditional statistical analyses. The application of the proposed methodology to the Balst Furnace(BF) process has been presented for details. The BF process is one of the complicated processes, due to the highly nonlinear and correlated behaviors, and so the analysis for the process based on the mathematical modeling has been very difficult. So the statisitical analysis has come forward as a alternative way for the useful analysis. Using the proposed methodology, we could interpret the complicated process, the BF, better than any other mathematical methods and find the direction for process operation improvement. The direction of process operationimprovement, in the BF case, is to increase the fludization and the permeability, while decreasing the effect of tapping operation. These guide directions, with those physical meanings, could save fuel cost and process operator's pressure for proper actions, the better set point changes, in addition to the assistance with the better knowledge of the process. Open to set point change, the BF has a variety of steady state modes. In usual almost chemical processes are under the same situation with the BF in the point of multimode steady states. The proposed methodology focused on the application to the multimode steady state process such as the BF, consequently can be applied to any chemical processes set point changing whether operator intervened or not.

• 대한공간정보학회지
• /
• 제13권3호
• /
• pp.3-13
• /
• 2005

본 연구의 목적은 공간데이터 제작과정의 품질관리방법을 정립하는데 있다. 이를 위하여 총 17개의 국내 공간데이터 품질관련 법규 및 주요 항측 업체를 대상으로 작업순서, 사용장비, 작업 전후의 결과물의 정확도를 중심으로 조사, 분석하였다. 조사, 분석한 내용을 기반으로 공간데이터의 구축공정을 '항공사진을 이용한 수치지도 신규제작', '기존 수치지도 수정제작', '수치표고모델 구축', '영상지도제작'에 의한 공간데이터 구축 공정을 표준화하였으며, 공정별로 생성되는 공간데이터의 품질을 체크할 수 있는 요소들을 정립하였다.

• 한국측량학회:학술대회논문집
• /
• 한국측량학회 2004년도 추계학술발표회 논문집
• /
• pp.355-360
• /
• 2004

This study is aimed at developing the system to manage the process and metadata of spatial data construction. The process of spatial data construction is standardized by analyzing knowhow of major firms and the provisions of MOCT(Ministry of the Construction and Transportation), and by appling the development methodology of information system. The system from this study has the capability to manage efficiently the process and metadata of spatial data construction. The process is shown by using index map. Also, it is shown by using Gantt chart and PERT chat after developing the interface for MS Project. The metadata is generated from the process, and managed systematically.

• 산업공학
• /
• 제20권3호
• /
• pp.288-297
• /
• 2007

Success of semiconductor/LCD industry depends on its yield and quality of product. For the purpose, FDC (Fault Detection and Classification) system is used to diagnose fault state in main manufacturing processes by monitoring time series data collected by equipment sensors which represent various conditions of the equipment. The data set is segmented at the start and end of each product lot processing by a trigger event module. However, in practice, segmented sensor data usually have the features of data asynchronization such as different start points, end points, and data lengths. Due to the asynchronization problem, false alarm (type I error) and missed alarm (type II error) occur frequently. In this paper, we propose a robust process fault detection system by integrating a process event detection method and a similarity measuring method based on dynamic time warping algorithm. An experiment shows that the proposed system is able to recognize abnormal condition correctly under the asynchronous data situation.

• 한국기계가공학회지
• /
• 제20권9호
• /
• pp.90-96
• /
• 2021

As real-time data of factories can be collected using various sensors, the adaptation of intelligent unmanned processing systems is spreading via the establishment of smart factories. In intelligent unmanned processing systems, data are collected in real time using sensors. The equipment is controlled by predicting future situations using the collected data. Particularly, a technology for the prediction of tool wear and for determining the exact timing of tool replacement is needed to prevent defected or unprocessed products due to tool breakage or tool wear. Directly measuring the tool wear in real time is difficult during the cutting process in milling. Therefore, tool wear should be predicted indirectly by analyzing the cutting load of the main spindle, current, vibration, noise, etc. In this study, data from the current and acceleration sensors; displacement data along the X, Y, and Z axes; tool wear value, and shape change data observed using Newroview were collected from the high-speed, two-edge, flat-end mill machining process of SKD11 steel. The support vector machine technique (machine learning technique) was applied to predict the amount of tool wear using the aforementioned data. Additionally, the prediction accuracies of all kernels were compared.

• 한국인터넷방송통신학회논문지
• /
• 제18권4호
• /
• pp.219-226
• /
• 2018

산업용 사물인터넷(IIoT:Industrial Internet of Thing)은 기존의 공정의 자동화란 범주를 넘어 모든 제조공정을 정보화 하는 것을 의미한다. 또한 각 공정에 설치된 센서로 부터 수집되는 데이터를 토대로 정보화 시스템을 구축하여 각 공정을 실시간으로 관리하고 자동화하여 최적의 생산성을 유지하는데 그 목적을 두고 있다. 각 공정의 센서로 부터 수집되는 데이터는 비정형성을 띄고 있으며 이러한 비정형데이터를 효과적으로 수집하고 처리하기 위해 많은 연구가 이루어지고 있다. 본 논문에서는 효과적인 빅데이터 수집 및 처리를 위하여 미들웨어로 Node-RED를 사용한 시스템을 제안하였다.

• 한국데이터정보과학회:학술대회논문집
• /
• 한국데이터정보과학회 2005년도 춘계학술대회
• /
• pp.7-17
• /
• 2005

Consider a stuffing process where sausage-casings are filled with sausage-kneading. One of the most important factors in the stuffing process is weights of stuffed sausages. Sausages weighting above the specified limit are sold in a regular market price for a fixed price, and underfilled sausages are reworked at the expense of reprocessing cost. In this paper, the sausage stuffing process is inspected for improving productivity and quality levels. Several statistical process control tools are suggested by using real data obtained from a Korean Vienna sausage company.

• Journal of the Korean Data and Information Science Society
• /
• 제21권6호
• /
• pp.1311-1317
• /
• 2010

A continuous time asymmetric power GARCH(1,1) model is suggested, based on a single background driving L$\'{e}$vy process. The stochastic differential equation for the given process is derived and the strict stationarity and kth order moment conditions are examined.

• 한국산학기술학회논문지
• /
• 제17권7호
• /
• pp.374-379
• /
• 2016

실시간 공정 감시 체계는 공정에서 발생된 이상상황을 조기에 감지하도록 설계된다. 공정 감시를 위해 패턴 인식과 머신 러닝 분야에서 비선형 방법론을 비롯한 다양한 방법들이 사용되고 있는 상황이다. 본 연구에서는 데이터의 불균형이 존재하는 공정으로부터 얻은 데이터에 기반한 공정 감시 모델을 제시한다. 정상 조업영역의 과거 데이터는 쉽게 얻을 수 있지만 특정 이상 상황에 대한 이상 데이터는 상대적으로 많지 않다. 이러한 상황에서는 필터링 방법의 활용이 공정 감시 성능 향상에 도움이 될 수 있는데 이는 데이터 모델링에 필요 없는 데이터 산포를 제거하거나 필터링함으로써 달성된다. 본 연구에서는 다양한 선형 및 비선형 방법에 기반한 모니터링 모델들의 감시 성능을 회분식 공정 데이터를 활용하여 비교 검증하였으며 이를 통해 향상된 감시 성능을 얻을 수 있었다.