• Proceedings of the KIEE Conference
• /
• 2001.04a
• /
• pp.366-368
• /
• 2001

ProfiBus provides real-time data communication among field devices in the EMU(Electrical Multiple Unit) and TCMS(Train Control Monitoring System). This paper presents an adapt to Train Communication Network for EMU using ProfiBus DP(Decentralized Periphery) method, which is the layer 2 DDLM (Direct Data Link Mapper) protocol of ProfiBus.

• International Journal of Internet, Broadcasting and Communication
• /
• v.15 no.4
• /
• pp.128-133
• /
• 2023

Satellite based communication is networks in which users in a wide area can access without wired-based ground infrastructure. In particular, the need is emerging due to the recent Ukraine-Russia war. Satellite network systems acquire data that is difficult to observe on Earth as well as communication networks and are also used for research and development, which allows additional data to be produced. However, due to the nature of communication networks existing in outer space, certain vulnerabilities are revealed, and attacks based on them can be exposed. In this paper, we analyze vulnerabilities that may arise due to the nature of satellite communication networks and describes current research, countermeasures, and future research directions.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.7 no.5
• /
• pp.983-989
• /
• 2012

IEEE 802.3az LPI mechanism allows an Ethernet link to reduce power consumption by entering a low-power sleeping mode and letting some components being powered off when there is no data to be transmitted through the link. However, if small amount of packets are being sent periodically, such a mechanism can not obtain energy efficiency due to a high overhead caused by excessive mode transitions. In this paper, we propose an enhanced LPI mechanism which can perform state transition adaptively based on the traffic characteristics on transport layer and network status. This simulation result shows that proposed mechanism improves energy efficiency than LPI mechanism with respect to energy consumption rate for various traffic loads.

• ETRI Journal
• /
• v.25 no.5
• /
• pp.328-336
• /
• 2003

Bluetooth is a specification for short-range wireless communication using the 2.4 GHz ISM band. It emphasizes low complexity, low power, and low cost. This paper describes an area-efficient digital baseband module for wireless technology. For area-efficiency, we carefully consider hardware and software partitioning. We implement complex control tasks of the Bluetooth baseband layer protocols in software running on an embedded microcontroller. Hardware-efficient functions, such as low-level bitstream link control; host controller interfaces (HCIs), such as universal asynchronous receiver transmitter (UART) and universal serial bus (USB)interfaces; and audio Codec are performed by dedicated hardware blocks. Furthermore, we eliminate FIFOs for data buffering between hardware functional units. The design is done using fully synthesizable Verilog HDL to enhance the portability between process technologies so that our module can be easily integrated as an intellectual property core no system-on-a-chip (SoC) ASICs. A field programmable gate array (FPGA) prototype of this module was tested for functional verification and realtime operation of file and bitstream transfers between PCs. The module was fabricated in a $0.25-{\mu}m$ CMOS technology, the core size of which was only 2.79 $mm{\times}2.80mm$.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.4
• /
• pp.1877-1882
• /
• 2013

Smart Utility Network (SUN) is not only a core technology of intelligent green home networks but also a future technology which can be applicable to various areas instead of ZigBee. SUN should be compliment with IEEE 802.15.4g standard and can provide high link margin and stable communication data-rate for poor communication surrounding. This paper describes how to design the system simulation environment for the SUN RF transceiver, and also reports the required block-level specification for each circuit and various implementation impairments. Finally, the measured performances of the fabricated RF transceiver, which has utilized the system simulation results, completely satisfies the IEEE 802.15.4g SUN PHY standard.

• Information and Communications Magazine
• /
• v.13 no.4
• /
• pp.56-63
• /
• 1996

In this paper, the phisical layer of 4.3008 Mcps wideband CDMA which is proposed as the standard of personal communication service system is introduced. It is designed to fit 5 MHz bandwidth by using $28{\times}2^n$ Hadamard code. 13 kbps CELP vocoder is chosen as the main one and 32 kbps ADPCM can be applied. In the reverse link, the burst pilot scheme is proposed and produces the increase of capacity compared with the continuous pilot method. In order to maintain the service quality when the signaling data is increased, the information data and signaling data are time-multiplexed and making use of signaling activity brings the increase of capacity. QPSK data and QPSK spreading, variable frame size, and code pair assignment for high data rate are accomplished and then information data is transmited up to 64 kbps. It is expected that the proposed techiniques here are used in the FPLMTS.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.10
• /
• pp.2373-2379
• /
• 2015

COMS(Communication, Ocean and Meteorological Satellite), the first Korean geostationary meteorological satellite, provides free meteorological information through HRIT/LRIT(High/Low Rate Information Transmission) service. This work presents the development of data receiver circuit that is essential to the implementation of a low-cost meteorological information receiver system. The data receiver circuit processes the data units according to the specification of physical layer and data link layer of HRIT/LRIT service. For this purpose, the circuit consists of a Viterbi decoder, a sync. word detector, a derandomizer, a Reed-Solomon decoder and so on. The circuit also supports PCI express interface to pass the information data on to the host PC. The circuit was implemented on an FPGA(field programmable gate array) and its function was verified through simulations and hardware implementation.

• The Journal of the Korea Contents Association
• /
• v.7 no.10
• /
• pp.10-18
• /
• 2007

Today, third-generation(3G) of mobile communication service executing the video and TV. And low cost, high speed data rate will emerge communication of the fourth generation(4G) in future. So, in this paper we studied occupied frequency bandwidth of common technique criteria among the technique criteria for the 4G mobile communication of FDD-based on Up/Down-link. The mobile communication traffic is predicted Up/Down-link of non-symmetric in future. So we proposed the PHY layer parameters of occupied frequency bandwidth of Up/Down-link with both 1:3 and 1:6. We also verified this through the simulation. We proposed the occupied frequency bandwidth for the 4G mobile communication in this paper.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.23 no.5
• /
• pp.1173-1183
• /
• 1998

This paper proposes an SS-PRMA protocol for the integrated voice and data services in the packet radio networks. In this protocol, the uplink logical channels are provided by combining the time slots and the spreding codes. SS-PRMA protocol contains some features of existing protocols such as PRMA, slotted ALOHA, and CDMA. In the proposed protocol, the voice terminals use a reservation mechanism, and the dta terminals use a slotted ALOHA scheme. The analysis and the simulation results show that most of the performances for the voice traffic can be achieved by employing a few distinct spreading codes and the data traffic throughput is closely related to the number of spreading code channels. Also it shows that the data traffic performance can be significantly improved by applying an FEC scheme to the data link layer.

• The KIPS Transactions:PartC
• /
• v.14C no.3 s.113
• /
• pp.305-312
• /
• 2007

In this paper, we present a received signal strength (RSS) prediction model to timely Initiate link layer triggers for fast handoff in a wireless LAN system. Noting that the distance between a mobile terminal and an access point is not changed abruptly in a short time interval, an adaptive RSS predictor based on a stationary time series model is proposed. RSS data obtained from ns-2 simulations are used to identity the time series model and verify the predictability of the RSS data. The results suggest that an autoregressive process of order 1 (AR(1)) can be used to represent the measured RSSs in a short time interval and predict at least 1-step ahead RSS with a high confidence level.