• Korean Journal of Food Science and Technology
• /
• v.9 no.2
• /
• pp.123-130
• /
• 1977

A laboratory study was made to develop a simple and economic model method for the systematic determination of functional properties of 'Soy Protein Isolates (SPI)' prepared from defatted soybean meal. These are required to evaluate and to predict how SPI may behave in specific systems and such proteins can be used to simulate or replace conventional proteins. Data concerning the effects of pH, salt concentration, temperature, and protein concentration on the functional properties which include solubility, heat denaturation, gel forming capacity, emulsifying capacity, and foaming capacity are presented. The results are as follows: 1) The yield of SPI from defatted soybean meal increased to 83.9 % as the soybean meal was extracted with 0.02 N NaOH. 2) The suitable viscocity of a dope solution for spinning fiber was found to be 60 Poises by using syringe needle (0.3 mm) with 15 % SPI in 0.6 % NaOH. 3) Heat caused thickening and gelation in concentration of 8 % with a temperature threshold of $70^{\circ}C$. At $8{\sim}12\;%$ protein concentration, gel was formed within $10{\sim}30\;min$ at $70{\sim}100\;^{\circ}C$. It was, however, disrupted rapidly at $125\;^{\circ}C$ of overheat treatment. The gel was firm, resilient and self-supporting at protein concentration of 14 % and less susceptible to disruption of overheating. 4) The emulsifying capacity (EC) of SPI was correlated positively to the solubility of protein at ${\mu}=0$. At pH of the isoelectric point of SPI (pH 4.6), EC increased as concentration of sodium chloride increased. Using model system$(mixing\;speed:\;12,000\;r.p.m.,\;oil\;addition\;rate:\;0.9\;ml/sec,\;and\;temperature\;:\;20{\pm}1\;^{\circ}C)$, the maximum EC of SPI was found to be 47.2 ml of oil/100 mg protein, at the condition of pH 8.7 and ${\mu}=0.6$. The milk casein had greater EC than SPI at lower ionic strength while the EC of SPI was the same as milk casein at higher ionic strength. 5) The shaking test was used in determining the foam-ability of proteins. Progressively increasing SPI concentration up to 5 % indicated that the maximum protein concentration for foaming capacity was 2 %. Sucrose reduced foam expansion slightly but enhanced foam stability. The results of comparing milk casein and egg albumin were that foaming properties of SPI were the same as egg albumin, and better than milk casein, particularly in foam stability.

• Korean Security Journal
• /
• no.36
• /
• pp.177-200
• /
• 2013

As we enter a high industrial society that widens the gap between the rich and poor, demand for the security services has grown explosively. With the growth in quantitative expansion of security services, people have also placed increased requirements on more sophisticated and diversified security services. Consequently, market outlook for private security services industry is positive. However, Korea's private security services companies are experiencing difficulties in finding a direction to capture this new market opportunity due to their small sizes and lack of management-strategic thinking skills. Therefore, we intend to offer a direction of development for our private security services industry using a management-strategy theory and the Analytic Hierarchy Process(AHP), a structured decision-making method. A resource-based theory is one of the important management strategy theories. It explains that a company's overall performance is primarily determined by its competitive resources. Using this theory, we could analyze a company's unique resources and core competencies and set a strategic direction for the company accordingly. The usefulness and validity of this theory has been demonstrated as it has often been subject to empirical verification since 1990s. Based on this theory, we outlined a set of basic procedures to establish a management strategy for the private security services companies. We also used the AHP method to identify competitive resources, core competencies, and strategies from private security services companies in contrast with public companies. The AHP method is a technique that can be used in the decision making process by quantifying experts' knowledge and unstructured problems. This is a verified method that has been used in the management decision making in the corporate environment as well as for the various academic studies. In order to perform this method, we gathered data from 11 experts from academic, industrial, and research sectors and drew distinctive resources, competencies, and strategic direction for private security services companies vis-a-vis public organizations. Through this process, we came to the conclusion that private security services companies generally have intangible resources as their distinctive resources compared with public organization. Among those intangible resources, relational resources, customer information, and technologies were analyzed as important. In contrast, tangible resources such as equipment, funds, distribution channels are found to be relatively scarce. We also found the competencies in sales and marketing and new product development as core competencies. We chose a concentration strategy focusing on a particular market segment as a strategic direction considering these resources and competencies of private security services companies. A concentration strategy is the right fit for smaller companies as a strategy to allow them to focus all of their efforts on target customers in a single segment. Thus, private security services companies would face the important tasks such as developing a new market and appropriate products for such market segment and continuing marketing activities to manage their customers. Additionally, continuous recruitment is required to facilitate the effective use of human resources in order to strengthen their marketing competency in a long term.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.37 no.3
• /
• pp.593-601
• /
• 2017

With the rapid industrial development and national economic advance since 1970, the national income of Korea has sharply increased. As a result, issues regarding city expansion, urban concentration, increase in the number of registered motor vehicles, and increase in traffic have caused transportation issues such as traffic congestion and problems with parking. Especially, enforcement ordinances and rules have been established on installation and management of parking lots to solve problems with parking which are raised as social problems such as conflict with neighbors but the flexible calculation of legal parking space has the limitations because of the diversity and complex functionality of purposes of facilities. Accordingly, this study attempted to supplement such demerit of the parking space demand forecast method based on the legally required number of parking spaces and average unit requirement in the parking space supply. This study estimated the required number of parking spaces by analyzing existing literature, collecting field research data, and analyzing the factors that have an impact on the parking demand. Also, it compared the required number of parking spaces based on the average unit requirement as well as the required number of parking spaces by the forecast model based on the cumulative number of motor vehicles parked. The result was that the required number of parking space based on average unit requirement was less than the cumulative number of motor vehicles parked by 9.99%. Meanwhile, the required number of parking spaces by the forecast model was more than the cumulative number of motor vehicles parked by 4.37%. Therefore, it is believed that the parking space forecast model is more efficient than the others in estimating there quired parking space. The parking space forecast model of this study consider different environmental factors to enable practical parking demand forecast considering the local characteristics and thus supply the parking space in an efficient way.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.33 no.12
• /
• pp.1956-1964
• /
• 2009

Understanding ethical fashion consumers in Korea is essential for the expansion of the ethical fashion market. This study analyzed ethical consumers in Korea in an examination of the factors that influence ethical purchase behavior and attitudes. The differences between ethical fashion consumers and non-ethical fashion consumers were investigated using eight variables (perceived consumer effectiveness (PCE), self-direction, benevolence, universalism, social responsibility, perceived behavioral control, face saving, and group conformity). Data were collected by means of a questionnaire through both on-line and off-line surveys from April 20 to June 7, 2009. Only the respondents knowledgeable of ethical products or ethical consumption were asked to complete the questionnaire. A total of 494 samples were used for analyses. Using independent samples t-test, the differences in each variable between two groups were examined. There were significant differences between ethical fashion consumers and non-ethical fashion consumers in attitudes toward ethical consumption behavior, behavioral intention, PCE, self-direction, universalism, social responsibility, and face saving variables. The factors influencing attitude and behavior intention were investigated by step-wise regression analyses. For ethical fashion consumers, the attitudes to ethical consumption behavior were largely influenced by PCE and benevolence. Social responsibility was the most predictable variable in guiding behavioral intention. Behavioral intention was also influenced by benevolence and attitude. Group conformity was found to be negatively correlated with behavioral intention. The findings of this study provide significant guidance for marketers of ethical fashion products. This study is the start of ethical fashion consumer research in Korea and can develop into variable subfields in the future.

• Cartoon and Animation Studies
• /
• s.51
• /
• pp.181-201
• /
• 2018

The cartoon industry in Korea has continued to decline due to the contraction of published comics market and decrease in the number of comic books rental stores until the 2000s when it rapidly started to experience qualitative changes and quantitative growth due to the emergence of webtoon. The market size of webtoon industry, valued at 420 billion won in 2015, is expected to grow to 880.5 billion won by 2018. Notably, most cartoonists who draw cartoon strips are using digital devices and producing scripts in data, thereby overcoming the geographical, spatial and physical limitation of contents. As a result, a favorable environment for the creation of local ecosystems is generated. While the infrastructures of human resources are steadily growing by region, cartoon industries that are supported by the government policy have shown good performance combined with factors of creative infrastructures in local areas such as webtoon experience centers, webtoon campuses and webtoon creation centers, etc. Nevertheless, it is true that cartoon infrastructures are substantially based on a capital area which leads to an imbalanced structure of cartoon industry. To see the statistics, companies of offline cartoon business in Seoul and Gyeonggi Province make up 87%, except for distribution industry. In addition, companies of online cartoon business which are situated outside of Seoul and Gyeonggi Province form merely 7.5%. Studies and research on local webtoon are inadequate. The existing studies on local webtoon usually focus on its industrial and economic values, mentioning the word "local" only sometimes. Therefore, this study looked into the current status of local webtoon of the present time for the current state of local cartoon ecosystem, middle and long-term support from the government, and an alternative in the future. Main challenges include the expansion of opportunities to enjoy cartoon cultures, the independence of cartoon infrastructure, and the settlement of regionally specialized cartoon cultures. It means that, in order to enable the cartoon ecosystem to settle down in local areas, it is vital to utilize and link basic infrastructures. Furthermore, it is necessary to consider independence and autonomy beyond the limited support by the government. Finally, webtoon should be designated as a culture, which can be a new direction of the development of local webtoon. Furthermore, desirable models should be continuously researched and studied, which are suitable for each region and connect them with regional tourism, culture and art industry. It will allow the webtoon industry to soft land in the industry. Local webtoon, which is a growth engine of regions and main contents of the fourth industrial revolution, is expected to be a momentum for the decentralization of power and reindustrialization of regions.

• Journal of Korean Physical Therapy Science
• /
• v.9 no.3
• /
• pp.107-119
• /
• 2002

Astrocyte, which shares the greatest part of the brain (about 25%), is a land of glial cell that composes the central nervous system along with microglia, ependymal cell and oligodendroglia. It has 7-9nm of fibers in its cytoplasma, which are composed of glial fibrillary acidic protein (GFAP) and vimentin. As for the functions of the astrocyte, it has, so far, been supposed that the astrocyte will play a cytoskeletal role in maintaining the structure of the cerebrum, play a role as a blood-brain barrier so that it can induce migration of the neuron in its development and substances in the blood cannot go into the nervous tissue, and a role of immunology and phagocytosis. However, it was revealed today that it will be a role in preventing expansion of injury by attaching itself to the connective tissue such as the vessel and the pia mater when the nervous tissue or the arachnoid is injured. Microcurrent stimulation can control current, on the basis of A unit. That is, with such devices using it, it is possible to sense, from the outside, the injured current(wound current) of the lesion and to change it into the normal current, thereby promoting the restoration of the cells. In order to examine the effects of microcurrent stimulation on the injured astrocytes in the rabbits, this study was conducted with 24 New Zealand White Rabbit as its subjects, which were divided into 8 animals of the experiment group and 16 animals of the control group. After the animals in the experiment group were fixed to the stereotaxic apparatus, their hair was removed and their premotor area(association area) perforated by the micro-drill for skull-perforation with the depth of 8mm from the scalp. In one week after the injury, 4 animals in the control group and 8 animals in the experiment group were sacrificed and examined with immunohistochemical method. And in three weeks, the remaining 4 animals in the control group and 8 animals in the experiment group were also sacrificed and examined with the same way. The conclusion has been drawn as follows : In the control group sacrificed in one week after the injury, the astrocytes somewhat increased, compared with the normal animals, and in the group sacrificed in three weeks after the injury, they increased more (p < 0.05). The experiment group A in one week showed a little increase, but there was no significant differences, but the experiment group in three weeks showed more increase, compared with the experiment group in one week (p < 0.05). The experiment group B in one week showed more increase than the control group or the experiment group A, and the experiment group in three weeks showed more increase than the experiment group in one week (p < 0.05). Among the astrocytes, fibrous astrocytes were mostly observed, increasing as they are close to the lesion, and decreasing as they are remote from it. The findings show that microcurrent can cause the astrocytes to proliferate and that it will be more effective to stimulate the cervical part somewhat remote from the lesion rather than to directly stimulate the part of the lesion. Thus, microcurrent stimulation can be one of the methods that can activate the reaction of astrocytes, which is one of the mechanism for treating cerebral injury with hemorrhage. Therefore, this study will be used as basic research data for promoting restoration of functions in the patient with injury in the central nervous system.

• Journal of Technology Innovation
• /
• v.24 no.1
• /
• pp.143-167
• /
• 2016

The purpose of this study is to analyze changes of innovation activities and their performance in pre-IPO and post-IPO of KOSDAQ IPO listed companies in medical and pharmaceutical fields, which require high R&D investment, from 2000 to 2005 in Korea. The innovation efficiencies of the IPO companies were measured before and after three years based on the DEA model. The financial data and patent information of the listed company during total 6 years, which were 3 years before IPO and 3 years after IPO, were collected. The main results of this research are as follows. First, it took an average 12.86 years until IPO in the start-up of the IPO companies in the pharmaceutical sector, and innovation was on average more active than the IPO before. R&D investment was higher than the IPO before, and the number of the applied patent during 3 years after IPO was 16.67 which was increased from 8.43 during 3 years before IPO. In addition, the average scope of technology of the IPO companies was expanded from 11 to 22 technology fields during previous 3 year and after 3 year each, and financial growth after IPO was lower than the previous IPO. Second, the financial performance of R&D investment and the performance of patent activity were weakened in the efficiency after the IPO, and the integrated performance from the patenting activities and the R&D investment was decreased after the IPO. Finally, the efficiency of the financial performance of the patenting activity was lower than the efficiency of the financial performance of the patent and R&D investment and patent activities under the R&D investment. In particular, the inefficiency of the firms' patenting activities performance after the IPO was caused by the decreasing return to scale, according to the results of this study. This results implicate that the expansion of R&D investments through the IPO had not lead to the financial performance of the market, and that the overall inefficiency since the IPO is due to the inefficiencies at the stage for the outcome of innovation activity rather than the output obtained through the R&D investments that appear to lead the performance of the market.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.22 no.4
• /
• pp.24-38
• /
• 2019

Due to the dramatic spatial changes caused by industrialization, environmental problems such as air pollution and urban heat island phenomenon, etc. are occurring in cities. In this case, the wind corridor, which is a passage through which fresh and cool air generated in forests outside cities move to the downtown, can be used as a spatial planning method for improving urban environmental problems. Cold air is determined by the characteristics of the flow depending on the topography and land use of cities, and based on this, the medium- and long-term plan should be established. Therefore, this study analyzed the flow of cold air at night through the KLAM_21 model in Suwon-si, Gyeonggi-do, to prepare the basic data required to apply the wind corridors. As a result, it turned out that cold air of Suwon-si was mainly generated from Gwanggyo Mountain that is a large mountain area in the north, and flowed into the urbanization promotion area, and about three hours after sunset, cold air flowed into the downtown. By district, the depth, wind speed, and direction of the cold air layer were formed differently according to the characteristics of the topography and land use. In the areas where large forests were adjacent, the flow of cold air was active. There are three main wind corridors where cold air flows to the downtown of Suwon-si, all of which are formed around rivers. Especially, if the connection between rivers and the surrounding green areas is high, the effect of wind corridors is found to be significant. In order to utilize the wind corridors of Suwon-si, based on the results of this study, it is necessary to make climate maps through actual survey and complex analysis of cold air flow and establish mid-to-long-term plans for the conservation and expansion of major wind corridors.

• Journal of dental hygiene science
• /
• v.6 no.4
• /
• pp.277-284
• /
• 2006

The purpose of this study was to examine the perception of dental hygiene freshmen about their major and their occupational consciousness. The subjects in this study were 361 dental hygiene freshmen at three different colleges in Gyeonggi province. After a survey was conducted, the collected data were analyzed with SPSS WIN 11.5 program. The findings of the study were as follows: 1. As for their view of occupation, the students made a well-paying job a priority(M = 2.97), and looked upon an occupation as a means of living(M = 1.60). Regarding the use of the profits of dental hospitals and clinics, they believed that they should reinvest their profits in a purchase of machinery, an expansion of facilities or technical development(M = 2.00). 2. Concerning relations between their motivation of college entrance and their satisfaction with their major, 96.6 percent of those who found their major satisfactory or quite satisfactory considered it to right up with their alley. 82.6 percent of them chose their major to get a stable job, and 62.8 percent of them did it through the advice of their families, relatives or regular teachers. 59.1 percent of them did it in consideration of their college entrance examination scores. Every student who were pressed for economic reasons to choose their major were unsatisfied with it. Thus, their motivation of college entrance made a statistically significantly wide difference to their satisfaction with major(p < 0.01). 3. They got a mean of 3.10 in occupational consciousness. By sub- category, they scored highest in interpersonal and work ethics(3.19 respectively). They got a mean of 3.04 in academic ethics, and got a mean of 2.99 in professional ethics, which was the lowest mark. 4. As to connections between their general characteristics and occupational consciousness, their occupational awareness was significantly different according to their motivation of college entrance and information they acquired at the time of college entrance(p < 0.05). In regard to the relationship of their satisfaction with major to their occupational awareness, their occupational consciousness statistically significantly varied with their department, their willingness of staying as a dental hygienist, the future prospect of dental hygienist (p < 0.01).

• Journal of the korean academy of Pediatric Dentistry
• /
• v.34 no.4
• /
• pp.623-631
• /
• 2007

Effect of Soft-start curing on the contraction stress of composite resin restoration polymerized with LED and plasma curing unit The purpose of this study was to evaluate the influence of soft-start light curing on contraction stress and hardness of composite resin. Composite resin (Filtek $Z-250^{TM}$, 3M ESPE, USA) was cured using the one-step continuous curing method with three difference light sources ; conventional halogen light ($XL3000^{TM}$, 3M ESPE, USA) cure for 40 seconds at $400 mw/cm^2$, LED light (Elipar Freelight $2^{TM}$, 3M-ESPE, USA) cure for 20 seconds at $800\;mW/cm^2$ a and plasma arc light ($Flipo^{TM}$, LOKKI, France) cure for 12 seconds at $1300 mW/cm^2$. For the soft-start curing method ; LED light (Elipar Freelight $2^{TM}$, 3M-ESPE, USA) cure exponential increase with 5 seconds followed by 17 seconds at $800\;mW/cm^2$ and plasma arc light ($Flipo^{TM}$, LOKKI, France) cure 2 seconds light exposure at $650\;mW/cm^2$ followed by 11 seconds at $1300\;mW/cm^2$. The strain guage method was used for determination of polymerization contraction. Measurements were recorded at each 2 second for the total of 800 seconds including the periods of light application. Obtained data were analyzed statically using Repeated measures ANOVA, One way ANOVA, and Tukey test. The results of present study can be summarized as follows: 1. Composite resin restoration showed transient expansion just after irradiation of curing light. Contraction stress was increased rapidly at the early phase of polymerization and reduced slowly as time elapsed (P<0.05). 2. Contraction stress was not revealed significant difference between Halogen curing light groups and LED and Plasma Light curing with soft-start group (P>0.05). 3. LED and Plasma Light curing with soft-start showed lower contraction stress than the one-step continuous light curing (P<0.05).