• The Journal of the Acoustical Society of Korea
• /
• v.15 no.2
• /
• pp.61-71
• /
• 1996

In this paper, dialogic triphone data base construction for triphone synthesis system is discussed. Particularly, in this work, dialogic speech data is collected from the broadcast media, and three different transcription steps are taken. Total 10 hours of speech data are collected. Among them, six hours of speech data are used for the triphone data base construction, and the rest four hours of data are reserved. Dialogic speech data base construction is far different from the reciting speech data base construction. This paper describes various steps that necessary for the dialogic triphone data base construction from collecting speech data to triphone unit labeling.

• Journal of the Korea Institute of Building Construction
• /
• v.3 no.4
• /
• pp.95-102
• /
• 2003

A construction project's period is limited by the order manufacture. And a construction project is requested a specific place, and has the characteristic to be irregular. Today, construction is to be representative high-cost and low-efficiency. This kind of problems appears in small construction projects more often than large construction projects. According to this facts, we recognized necessity of making practical application in methods of construction management. Also, we suggest application and establishment of integrated responsibility management department, PMIS(Project Management Information System) and Data Base. From now on, methods of construction management could be good opportunities for small construction projects and local construction companies. Therefore, small and local construction companies should try to improve their abilities. Likewise, the countries systematize to constitute the relation laws.

• 제어로봇시스템학회:학술대회논문집
• /
• 1989.10a
• /
• pp.407-412
• /
• 1989

Using the knowledge base which contains the patterns and data of the past experience of a plant, a learning control method is suggested. The knowledge for controlling a plant is stored to the knowledge base and continually modified after performance evaluation of an applied control input. The performance of the resultant knowledge based control system is examined by an application to process.

• International conference on construction engineering and project management
• /
• 2017.10a
• /
• pp.291-296
• /
• 2017

Infrastructure development as national project suffers from social conflict which is one of main risk to be managed. Social conflicts have a negative impact on not only the social integration but also the national economy as they require enormous social costs to be solved. Against this backdrop, this study analyzes social conflict using articles published by online news media based on web-crawling and natural language processing (NLP) techniques. As an illustrative case, the Jeju Naval Base (JNB) project which is one of representative conflict case in South Korea is analyzed. Total of 21,788 articles and representative keywords are identified annually. Additionally, comparative analysis is conducted between the extracted keywords and actual events occurred during the project. The authors explain actual events in the JNB project based on the extracted words by the year. This study contributes to analyze social conflict and to extract meaningful information from unstructured data.

• International conference on construction engineering and project management
• /
• 2007.03a
• /
• pp.433-439
• /
• 2007

A ubiquitous environment in construction requires integrating hardware and software systems. Currently the Construction System Integration Lab (CSIL) at Pusan National University is currently studying the application of ubiquitous technology for better communication in the construction process. In this paper, a pilot of Ubiquitous Concrete Pour System (u-CPS) has been presented to demonstrate the effectiveness of data exchange in the concrete pour process. The u-CPS environment takes advantage of the RFID technology for collecting construction data. The pilot can automatically generate the data for concrete pour work such as departure time, arrival time, concrete pour time. Construction managers can keep track of the progress of concrete pour work using the information. A case study was done for a building construction using the pilot system, the result of which demonstrated that the RFID-base system can help improve the effectiveness of data communication during the concrete pour process.

• Journal of the Korean GEO-environmental Society
• /
• v.14 no.11
• /
• pp.47-54
• /
• 2013

This study is the basic research to develop the customized base module for modular road system. A case study was carried out on designs of base module for soft soil condition. Two types of base module was proposed; crossbeam module and crossbeam-pile module. Based on the case study, it was verified crossbeam-pile module is suitable for soft soil condition and the optimum dimension of crossbeam-pile module for modular road system constructed on soft soil was determined. For development of the optimal base modular for modular road system, it is needed in the future to build a data base about ground and roadbed of road construction sites and to classify and systemized base modules according to soil conditions through many case studies.

• Journal of the Korea Construction Safety Engineering Association
• /
• s.36
• /
• pp.73-81
• /
• 2006

Construction fall accidents have been investigated by many researchers. Construction workers are prone to fall when elevations of the construction site is high. And falls are the most fatal accidents: it can be directly linked to the death. Construction fall accidents might be reduced by predetermining several areas which are highly probable to have fall accidents and by controlling such areas until the completion of the building construction. In this paper, a fall prevention system is suggested which can identify the areas where the focus on fall protection is perhaps most needed from the process characteristics. Main methodologies for this research are summarized as follows: 1. A data base on elements and types of falls is constructed from the data analysis of last 10 years fall accidents history. 2. Guideline is derived by identifying the highly probable areas of fall accidents with respect to the specific construction process. 3. Developed system is verified by applying the system to construction sites. 4. Finally a fall prevention system is suggested by utilizing the fall accidents data.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2004.05a
• /
• pp.9-12
• /
• 2004

Developing an efficient knowledge base construction mechanism as an input method for expert systems (ES) development is of extreme importance due to the fact that an input process takes a lot of time and cost in constructing an ES. Most ES require experts to explicit their tacit knowledge into a form of explicit knowledge base with a full sentence. In addition, the explicit knowledge bases were composed of strict grammar and keywords. To overcome these limitations, this paper proposes a knowledge conceptualization and construction mechanism for automated knowledge acquisition, allowing an efficient decision. To this purpose, we extended traditional knowledge map (KM) construction process to dynamic knowledge map (DKM) and combined this algorithm with relational database (RDB). In the experiment section, we used medical data to show the efficiency of our proposed mechanism. Each rule in the DKM was characterized by the name of disease, clinical attributes and their treatments. Experimental results with various disease show that the proposed system is superior in terms of understanding and convenience of use.

• Proceedings of the IEEK Conference
• /
• 2002.07c
• /
• pp.1764-1767
• /
• 2002

Recent explosive increases in information 'volume have led to a rapid development or a change of information technology which stores, searches, and manages a vast amount of information. It is considered that an effective share and utilization of a large amount of digital information produced by work performances is a pivotal element which can make decisive contributions to a great success of business management. This common property of information reflects a changing social paradigm including a change of business processes. This paper is aimed at designing and embodying the construction of knowledge base in an efficient project management system using unsupervised data mining techniques in order to extract information and utilize it as knowledge about standard data (statistical data, template etc.,), size prediction and a danger precaution notice which are needed for a plan and a scheduling of a new project from data coming from already-established projects.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.15 no.3
• /
• pp.814-836
• /
• 2021

Wildlife ecologists and biologists recapture deer to collect tracking data from deer collars or wait for a drop-off of a deer collar construction that is automatically detached and disconnected. The research teams need to manage a base camp with medical trailers, helicopters, and airplanes to capture deer or wait for several months until the deer collar drops off of the deer's neck. We propose an intelligent robust base-station research with a low-cost and time saving method to obtain recording sensor data from their collars to a listener node, and readings are obtained without opening the weatherproof deer collar. We successfully designed the and implemented a robust base station system for automatically collecting data of the collars and listener motes in harsh wilderness environments. Intelligent solutions were also analyzed for improved data collections and pattern predictions with drone-based detection and tracking algorithms.