• Smart Structures and Systems
• /
• v.29 no.2
• /
• pp.301-309
• /
• 2022

Protective coatings are most widely used anticorrosive structures for steel structures. The corrosion under the coating damages the host material, but this damage is completely hidden. Therefore, a field-applicable under-coating-corrosion visualization method has been desired for a long time. Laser ultrasonic technology has been studied in various fields as an in situ nondestructive inspection method. In this study, a comparative analysis was carried out between a guided-wave ultrasonic propagation imager (UPI) and pulse-echo UPI, which have the potential to be used in the field of under-coating-corrosion management. Both guided-wave UPI and pulse-echo UPI were able to successfully visualize the corrosion. Regarding the field application, the guided-wave UPI performing Q-switch laser scanning and piezoelectric sensing by magnetic attachment exhibited advantages owing to the larger distance and incident angle in the laser measurement than those of the pulse-echo UPI. Regarding the corrosion visualization methods, the combination of adjacent wave subtraction and variable time window amplitude mapping (VTWAM) provided acceptable results for the guided-wave UPI, while VTWAM was sufficient for the pule-echo UPI. In addition, the capability of multiple sensing in a single channel of the guided-wave UPI could improve the field applicability as well as the relatively smaller size of the system. Thus, we propose a guided-wave UPI as a tool for under-coating-corrosion management.

• Computers and Concrete
• /
• v.31 no.4
• /
• pp.349-358
• /
• 2023

This paper describes an in-depth analysis on flexural strength of a girder-deck system experiencing a strand debonding damage with various strengthening systems, based on finite element software ABAQUS. A detailed finite element analysis (FEA) model was developed and verified against the relevant experimental data performed by other researchers. The proposed analytical model showed a good agreement with experimental data. Based on the verified FE model, over a hundred girder-deck systems were investigated with the consideration of following variables: 1) debonding level, 2) span-to-depth ratio (L/d), 3) strengthening type, 4) strengthening material thickness. Based on the data above, a new detailed analytical model was developed and proposed for estimating residual flexural strength of the strand-debonding damaged girder-deck system with strengthening systems. It was demonstrated that both finite element model and analysis model could be used to predict flexural behaviors for debonding damaged prestressed girder-deck systems. Since the strands are debonding from surrounding concrete over a certain zone over the length of the beam, the increase of strain in strands can be linked with a ratio ψ, which is L_p/c. The analytical model was proposed and developed regarding the ratio ψ. By conducting procedure of calculating ψ, the ψ value varies from 9.3 to 70.1. Multiple nonlinear regression analysis was performed in Software IBM SPSS Statistics 27.0.1 to derive equation of ψ. ψ equation was curved to be an exponential function, and the independent variable (X) is a linear function in terms of three variables of debonding level (λ), span length (L), and amount of strengthening material (A_s). The coefficient of determinate (R²) for curve fitting in nonlinear regression analysis is 0.8768. The developed analytical model was compared to the ultimate capacities computed by FEA model.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.25 no.3
• /
• pp.1-16
• /
• 2023

The purposes of this study were to investigate bag purchasing behaviors and design preferences of male and female adult consumers, and to find the differences depending on sex and age variable. A survey was conducted on 400 male and female adults from 20s to 50s. The questionnaire consisted of bag purchase behaviors, bag design preferences, and the subjects' demographic characteristics. The data were analyzed by Cronbach's α, factor analysis, x² test and t-test using SPSS. The results were as follows. First, as bag selection criteria, four factors (practicality, symbolism, aesthetics, and economics) were derived, and adult consumers considered economics as the most important among the factors. As for purchasing information sources, three factors (media, human resources, and store) were derived, and adult consumers considered human resources and store information sources more important than media. The main motive for purchasing bags was age and damage of the owned products, and Internet shopping malls were the most common purchasing place. The average annual cost of purchasing bags was 100,000 to 300,000 won, and the frequency of purchase was about once a year. Second, as bag preference images, four factors (individual, romantic, active, and classic image) were derived, and adult consumers preferred classic images the most. The shoulder bag was the most preferred as the bag shape, and black was the most preferred bag color. For the material, natural leather was the most preferred, and for the size, medium size was the most preferred. Third, bag purchasing behaviors and design preferences showed many significant differences according to the sex and age of the consumers. Therefore, the results of this study suggests that bag companies need to establish product development and marketing strategies in consideration of differences according to the sex and age group of adult consumers.

• Journal of the Korea Society of Computer and Information
• /
• v.28 no.10
• /
• pp.217-227
• /
• 2023

This study aims to stratify consumer market evaluation items from the Consumer Decision Journey(CDJ) perspective and understand the relationship between laws/systems and consumer orientation through the Korea Consumer Agency's '19 Korea Consumer Markets Evaluation Indicators. This study divided consumer market evaluation items into the selection comparison stage, selection decision stage, and post-purchase experience stage. And present a model that stratified the relationship with consumer orientation of laws/systems and verified using the CDJ model's experience as a control variable. Studies have shown that the relationship between the consumer market evaluation index that evaluates consumer orientation can be stratified according to the consumer decision-making stage and positively affects the relationship with consumer orientation of laws/systems. In addition, the impact of consumer market evaluation variables (reliability, and price) on the consumer orientation of laws/systems was different depending on the presence or absence of consumer damage experience.

• Atmosphere
• /
• v.33 no.5
• /
• pp.519-530
• /
• 2023

Deep convection can make adverse effects on safe and efficient aviation operations by causing various weather hazards such as convectively-induced turbulence, icing, lightning, and downburst. To prevent such damage, it is necessary to accurately predict spatiotemporal distribution of deep convective area near the airport and airspace. This study developed a new index, the Aviation Convective Index (ACI), for deep convection, using the operational global Unified Model of the Korea Meteorological Administration. The ACI was computed from combination of three different variables: 3-hour maximum of Convective Available Potential Energy, averaged Outgoing Longwave Radiation, and accumulative precipitation using the fuzzy logic algorithm. In this algorithm, the individual membership function was newly developed following the cumulative distribution function for each variable in Korean Peninsula. This index was validated and optimized by using the 1-yr period of radar mosaic data. According to the Receiver Operating Characteristics curve (AUC) and True Skill Score (TSS), the yearly optimized ACI (ACI_YrOpt) based on the optimal weighting coefficients for 1-yr period shows a better skill than the no optimized one (ACI_NoOpt) with the uniform weights. In all forecast time from 6-hour to 48-hour, the AUC and TSS value of ACI_YrOpt were higher than those of ACI_NoOpt, showing the improvement of averaged value of AUC and TSS by 1.67% and 4.20%, respectively.

• Applied Chemistry for Engineering
• /
• v.35 no.2
• /
• pp.115-121
• /
• 2024

This study analyzed the influence of process variables affecting the thermodynamic equilibrium and fluid dynamics of interfaces such as reverse micelle, salt concentration, interfacial tension, and viscosity of fluids to optimize the microencapsulation process using the W1/O/W2 double emulsion method. The process variable with the greatest impact on encapsulation efficiency was found to be the difference in osmotic pressure between the W1 and W2 phases. It was observed that increasing the salt concentration in the W2 phase or decreasing the ascorbic acid concentration in the W1 phase resulted in higher encapsulation efficiency. Additionally, a larger difference in osmotic pressure led to increased damage to the surface of the microparticles, as confirmed by SEM images. The introduction of reverse micelles, which was anticipated to increase encapsulation efficiency, either had a low contribution or even decreased encapsulation efficiency. The yield of microcapsules was expressed as a universal function, applicable to all process conditions or solution compositions. According to this universal function, no further increase in yield was observed beyond the Ca (capillary number) of approximately 20.

• The Korea Journal of Herbology
• /
• v.39 no.3
• /
• pp.97-105
• /
• 2024

Objective : This study examined the effects of yaksun recipe on the anti-fatigue and endurance enhancement properties in the forced swimming test (FST). Methods : The treatment groups were divided randomly into three groups: water-treated FST (control), 200 mg/kg of red ginseng-treated FST (RG200), 200 mg/kg of water extract of yaksun recipe-treated FST (YS200). After FST, an autopsy was performed, and the tissue and serum were collected. Results : The swimming exhaustion time in the RG200 and YG200 groups were significantly increased compared to the control group. The YG200 group fatigue indicators, D-Lactate, LDH(lactate dehydrogenase), creatine kinase, and ammonia content, significantly decreased compared to the control group. In addition, liver glycogen content significantly increased in the YG200 and tended to increase in RG200. Likewise, the glucose contents were significantly increased compared to the control group. The muscle damage indicators GPT (glutamic pyruvic transaminase) and BUN (blood urea nitrogen), a protein metabolite, in the YG200 group significantly decreased compared to the control group. Furthermore the concentration of liver lipid peroxidation, MDA(malondialdehyde) levels significantly decreased in the RG200 and YG200 compared to control group. Conclusions : These results suggest that YG200 can increase the endurance exercise capacity by decreasing the fatigue indicators, saving glycogen, and elevating the antioxidant defense system.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.28 no.2
• /
• pp.17-26
• /
• 2024

In recent times, accidents involving structural elements, formwork, and shore have been persistently occurring during concrete pouring, especially in multi-story reinforced concrete (RC) structures. In previous studies, research on construction load analysis was mainly conducted for cases where the thickness of all slabs is constant. However, when the thickness of some slabs is different, the variation in the stiffness of slab cross-sections can lead to different distributions of construction loads, necessitating further investigation. In this study, the slab thickness was set as a variable, and the analysis of the distribution of construction loads was conducted, taking into account the influence of changes in slab thickness on the concrete stiffness and structure. It was confirmed that not only the concrete material stiffness but also the slab cross-section stiffness should be considered in the estimation of construction loads when the slab thickness changes. As the slab thickness increases, the maximum construction load and maximum damage parameter on the layer with increased thickness significantly increase, and it was observed that a thicker slab results in a higher proportion of construction load.

• Journal of Korea Port Economic Association
• /
• v.34 no.1
• /
• pp.111-132
• /
• 2018

As China continues to evolve as a major economic power and the Free Trade Agreement (FTA) between the Republic of Korea and China was ratified on June 1, 2015, market volume between the two countries is expected to grow more rapidly. This study aims on improving the efficiency of car-ferry lines. We conducted two surveys- for shippers and forwarders of car-ferry companies, and container liners. The study analyzes the decision factors for delivery companies and their importance for shippers and forwarders of car-ferry companies and container liners. Based on analysis of prior studies on the competition for car-ferry companies and liners, three primary variables are selected-promptness, economics, and safety. The promptness variable consists of shipping time, loading/unloading time, and customs clearing time. The economic variable consists of marine transportation cost from a domestic harbor to China, loading/unloading cost in the harbor, and overland transport cost from the harbor to shippers inland. Finally, the safety variable consists of cargo damage rates, safety facilities, such as lashing and shoring, and punctuality of transportation time. The survey and AHP results show that the promptness, safety, and economics factors are 0.549, 0.309, and 0.142 in the shipper groups of car-ferry companies' category, respectively. It indicates that there is considerable difference in the importance of each factor. In contrast, the factors are 0.350, 0.348, and 0.302 in the forwarders category, which suggests that there is little difference in each factor's importance. As for shippers and forwarders of liners, the importance of each factor is found to be in the following order: economics, safety, and promptness.

• Pediatric Infection and Vaccine
• /
• v.11 no.1
• /
• pp.90-100
• /
• 2004

Objective : Urinary tract infection(UTI) is a frequent serious bacterial infection in young infants. The clinical presentation may be non-specific and variable, depends on factors such as the age and the level of infection. Children with renal involvement may be at risk of permanent renal damage. Experimental studies have shown that renal lesions caused by acute febrile UTI may be prevented or diminished by early diagnosis and treatment. Therefore, it is important to find a method that can permit early diagnosis and identification of patients who are at risk for progressive renal damage. We designed this study to identify related factors in culture positive UTI infants, and also to identify related factors in culture negative UTI infants, who are febrile with pyuria, by using renal imaging and functional studies including renal sonography, DMSA scan and VCUG. Methods : Retrospectively analyzed the medical records of 136 febrile infants with pyuria over 2 years(from January 2001 to February 2003). Urine culture was done in all cases, and regardless of urine culture findings, renal imaging study was done if symptomatic UTI suspected. Results : Total 57 organisms were isolated in 53 patients. E. coli was the most common organism(86%), followed by E. faecalis, M. morganii, Proteus species, P. aeruginosa, S. aureus and E. fergusonii. Most of the isolates had high sensitivity on cephalosporins or amikacin and had low sensitivities on aminopenicillins. Abnormal acute phase DMSA scan or VCUG findings were seen in both urine culture positive and negative group without statistical differences(P>0.05). In febrile infants with pyuria, fever over 48 hours, older age and high CRP related to abnormal acute phase DMSA scan findings regardless urine culture results. Conclusion : 1st or 3rd generation cephalosporins with amikacin could be the first choice of treatment for UTI. Febrile infants with positive urine culture dose mean urinary tract infection but not acute pyelonephritis which directly relates to cortical damage which could be confirmed by acute phase DMSA scan. Even cases with negative urine culture findings, acute pyelonephritis should be concerned in febrile infants with pyuria who are older than 3 months of age, has fever over 48 hours or high CRP level. And in such cases, acute phase DMSA scan and VCUG should be evaluated for early treatment and long term prognosis.