• 제목/요약/키워드: damage variable

검색결과 372건 처리시간 0.025초

굴착선 주변공 발파의 암반손상을 고려한 터널 안정성 검토 (Tunnel Stability Assessment Considering Rock Damage from Blasting Near to Excavation Line)

  • 이인모;윤현진;이형주;이상돈;박봉기
    • 한국지반공학회논문집
    • /
    • 제19권4호
    • /
    • pp.167-178
    • /
    • 2003
  • 발파설계가 터널 굴착 시 암반손상 및 여굴에 미치는 영향을 분석하고 암반손상 및 여굴이 터널 안정성에 미치는 영향을 분석함으로서 발파설계가 터널 지보설계에 미치는 영향을 연구하였다. 도로터널의 일반적인 발파패턴에 대해 동적발파 수치해석을 시행하고 연속체 손상역학(continuum damage mechanics)의 손상변수(damage variable)를 이용하여 여굴과 암반손상 정도를 분석함으로서 터널 굴착면 주위의 암반손상 정도와 영역을 구분하였다. 또한 발파하중 같은 동적하중이 암반내를 전파할 때 변화하는 암반의 동적파괴기준에 대한 연구를 수행하였다. 발파 암반손상 영향을 터널 안정성 해석에 반영하기 위하여 손상된 암반강성과 파괴기준을 적용하였다. 손상된 암반강성은 손상역학의 강도감소 모델을 이용하여 감소시켰다. 손상된 암반의 파괴기준은 암반강성과 지질강도지수의 관계식에서 도출한 손상된 지질강도지수(GSI$GSI_d$)를 적용함으로서 산출한 수정 Hoek-Brown 파괴기준을 적용하였다. 암반손상을 고려하여 터널안정성을 해석한 결과, 암반손상을 고려하지 않는 경우와 비교하여 소성영역 범위가 확대되고 변위량이 증가하였다. 이는 발파암반손상을 고려하지 않고 터널설계를 하는 경우 단기적 혹은 장기적으로 터널안정성이 위협받을 수 있음을 나타내었다.

Dynamic failure features and brittleness evaluation of coal under different confining pressure

  • Liu, Xiaohui;Zheng, Yu;Hao, Qijun;Zhao, Rui;Xue, Yang;Zhang, Zhaopeng
    • Geomechanics and Engineering
    • /
    • 제30권5호
    • /
    • pp.401-411
    • /
    • 2022
  • To obtain the dynamic mechanical properties, fracture modes, energy and brittleness characteristics of Furong Baijiao coal rock, the dynamic impact compression tests under 0, 4, 8 and 12 MPa confining pressure were carried out using the split Hopkinson pressure bar. The results show that failure mode of coal rock in uniaxial state is axial splitting failure, while it is mainly compression-shear failure with tensile failure in triaxial state. With strain rate and confining pressure increasing, compressive strength and peak strain increase, average fragmentation increases and fractal dimension decreases. Based on energy dissipation theory, the dissipated energy density of coal rock increases gradually with growing confining pressure, but it has little correlation with strain rate. Considering progressive destruction process of coal rock, damage variable was defined as the ratio of dissipated energy density to total absorbed energy density. The maximum damage rate was obtained by deriving damage variable to reflect its maximum failure severity, then a brittleness index BD was established based on the maximum damage rate. BD value declined gradually as confining pressure and strain rate increase, indicating the decrease of brittleness and destruction degree. When confining pressure rises to 12 MPa, brittleness index and average fragmentation gradually stabilize, which shows confining pressure growing cannot cause continuous damage. Finally, integrating dynamic deformation and destruction process of coal rock and according to its final failure characteristics under different confining pressures, BD value is used to classify the brittleness into four grades.

전시 함정 손실률 산정 방법론: 사례연구를 중심으로 (A Case Study on Implementation of Methodology for Wartime Warships Damage Rate Estimation)

  • 옥경찬;임동순;최봉완
    • 한국군사과학기술학회지
    • /
    • 제20권1호
    • /
    • pp.137-147
    • /
    • 2017
  • Wartime warship damage rate indicates how much damage of friend warships shall have occurred during naval battles accomplished under specific war operational plans. The wartime damage rate analysis provides the baseline of wartime resources requirements. If wartime damage rate is overestimated, the national finance will get to negative effects because of exceeding the budget for inventory, operation, and maintenance of resources. Otherwise, if wartime damage rate is underestimated, the national defense will lose in the war because of lack of critical resources. In this respect, it is important to estimate the wartime damage rate accurately and reasonably. This paper proposes a systematic procedure to estimate the wartime warship damage rate. The procedure consists of five steps; force analysis, operation plan analysis, input variable definition, simulation modeling, and output analysis. Since the combat simulation model is regarded as the main tool to estimate damage rate, the procedure is focused on the development of model and experiments using the model. A case study with virtual data is performed to demonstrate the effectiveness of the developed procedure.

Damage evolution of red-bed soft rock: Progressive change from meso-texture to macro-deformation

  • Guangjun Cui;Cuiying Zhou;Zhen Liu;Lihai Zhang
    • Geomechanics and Engineering
    • /
    • 제36권2호
    • /
    • pp.121-130
    • /
    • 2024
  • Many foundation projects are built on red-bed soft rocks, and the damage evolution of this kind of rocks affects the safety of these projects. At present, there is insufficient research on the damage evolution of red-bed soft rocks, especially the progressive process from mesoscopic texture change to macroscopic elastoplastic deformation. Therefore, based on the dual-porosity characteristics of pores and fissures in soft rock, we adopted a cellular automata model to simulate the propagation of these voids in soft rocks under an external load. Further, we established a macro-mesoscopic damage model of red-bed soft rocks, and its reliability was verified by tests. The results indicate that the relationship between the number and voids size conformed to a quartic polynomial, whereas the relationship between the damage variable and damage porosity conformed to a logistic curve. The damage porosity was affected by dual-porosity parameters such as the fractal dimension of pores and fissures. We verified the reliability of the model by comparing the test results with an established damage model. Our research results described the progressive process from mesoscopic texture change to macroscopic elastoplastic deformation and provided a theoretical basis for the damage evolution of these rocks.

Predicting Damage in a Concrete Structure Using Acoustic Emission and Electrical Resistivity for a Low and Intermediate Level Nuclear Waste Repository

  • Hong, Chang-Ho;Kim, Jin-Seop;Lee, Hang-Lo;Cho, Dong-Keun
    • 방사성폐기물학회지
    • /
    • 제19권2호
    • /
    • pp.197-204
    • /
    • 2021
  • In this study, the well-known non-destructive acoustic emission (AE) and electrical resistivity methods were employed to predict quantitative damage in the silo structure of the Wolsong Low and Intermediate Level Radioactive Waste Disposal Center (WLDC), Gyeongju, South Korea. Brazilian tensile test was conducted with a fully saturated specimen with a composition identical to that of the WLDC silo concrete. Bi-axial strain gauges, AE sensors, and electrodes were attached to the surface of the specimen to monitor changes. Both the AE hit and electrical resistance values helped in the anticipation of imminent specimen failure, which was further confirmed using a strain gauge. The quantitative damage (or damage variable) was defined according to the AE hits and electrical resistance and analyzed with stress ratio variations. Approximately 75% of the damage occurred when the stress ratio exceeded 0.5. Quantitative damage from AE hits and electrical resistance showed a good correlation (R = 0.988, RMSE = 0.044). This implies that AE and electrical resistivity can be complementarily used for damage assessment of the structure. In future, damage to dry and heated specimens will be examined using AE hits and electrical resistance, and the results will be compared with those from this study.

소성-손상 모델을 이용한 콘크리트의 파괴해석 (Fracture Analysis of Concrete using Plastic-Damage Model)

  • 남진원;송하원;김광수
    • 한국전산구조공학회:학술대회논문집
    • /
    • 한국전산구조공학회 2004년도 가을 학술발표회 논문집
    • /
    • pp.534-541
    • /
    • 2004
  • The modeling of crack initiation and propagation is very important for the failure analysis of concrete. The cracking process in concrete is quite different from that of other materials, such as metal and glass, in that it is not a sudden onset of new free surface but a continuous forming and connecting of microcracks. The failure process of concrete by cracking causes irreversible deformations and stiffness degradation. Those phenomenon can be modeled using plasticity and damage theory in macroscopic aspect. In this study, a plastic-damage model based on homogenized crack model considering velocity discontinuity and damage variable which is a function of plastic strain is proposed for fracture analysis of concrete. Finally, the plastic-damage model is verified with experimental data.

  • PDF

LNG탱크 겹침용접부의 피로강도에 관한 연구 (A Study on the Fatigue Strength of Lap Weld of LNG Tank)

  • 김종호
    • 한국해양공학회지
    • /
    • 제13권3호통권33호
    • /
    • pp.29-35
    • /
    • 1999
  • At the design of Mark III membrane type LNG tank, an analytical and experimental approach on the fatigue strengths of membrane and its welds are very important in order to assist designers and surveyors. In this study, fatigue tests of lap weld of Mark III membrane type LNG tank were carried out and cumulative damage factor was calculated in order to estimate the fatigue life by probability density function and rule methods. It contained the following tests and reviews : 1) The fatigue tests of lap weld of stainless steel according to statistical testing method recommended by JSME, 2)Preparation of S-N curve for lap welds considering the statistical properties of the results of fatigue tests. 3) Procedure for estimating the initiation life of fatigue crack of lap welds under variable loads by the rule lf classification society and probability density function, 4) Guideline for inspection of lap welds fo membrane type LNG tank.

  • PDF

인프라건설 프로젝트 리스크 분석에 따른 손실 정량화 모델 개발 연구: 교량프로젝트를 중심으로 (Development of Loss Model Based on Quantitative Risk Analysis of Infrastructure Construction Project: Focusing on Bridge Construction Project)

  • 오규호;안성진
    • 한국건축시공학회:학술대회논문집
    • /
    • 한국건축시공학회 2022년도 봄 학술논문 발표대회
    • /
    • pp.208-209
    • /
    • 2022
  • This study aims to analyze the risk factors caused by object damage and third-party damage loss in actual bridge construction based on past insurance premium payment data from major domestic insurers for bridge construction projects, and develop a quantitative loss prediction model. For the development of quantitative bridge construction loss model, the dependent variable was selected as the loss ratio, and the independent variable adopted 1) Technical factors: superstructure type, foundation type, construction method, and bridge length 2) Natural hazards: flood anf Typhoon, 3) Project information: total construction duration, total cost and ranking. Among the selected independent variables, superstructure type, construction method, and project period were shown to affect the ratio of bridge construction losses, while superstructure, foundation, flood and ranking were shown to affect the ratio of the third-party losses.

  • PDF

가솔린 예혼합 압축 착화 엔진의 농후 한계에서 연소와 노킹 특성 (Knocking and Combustion Characteristics at Rich Limit of Gasoline HCCI Engine)

  • 염기태;장진영;배충식
    • 한국자동차공학회논문집
    • /
    • 제14권6호
    • /
    • pp.9-16
    • /
    • 2006
  • Variable valve timing is one of the attractive ways to control homogeneous charge compression ignition (HCCI) engine. Hot internal residual gas which can be controlled by variable valve timing(VVT) device, makes fuel evaporated easily, and ignition timing advanced. Regular gasoline was used as main fuel and di-methyl ether(DME) was used as ignition promoter in this research. HCCI engine operating range is limited by high combustion peak pressure and engine noise. High combustion pressure can damage the engine during operation. To avoid engine damage, the rich limits have to define using various methods. Peak combustion pressure, rate of cylinder pressure rise was considered to determine rich limit of engine operating range. Knock probability was correlated with the rate of cylinder pressure rise as well as the peak combustion pressure.

P 분포 블록하중에 의한 용접부의 누적피노 손상에관한 연구 (A study of cumulative damage of carbon steel(SM45C) welded joint by block load with p-distribution)

  • 표동근;안태환;신광철
    • Journal of Welding and Joining
    • /
    • 제9권1호
    • /
    • pp.40-47
    • /
    • 1991
  • The most fatigue tests carried out under the either stress or strain control, but machines and structures had taken variable stress. This variable stress was treated as statistics based on p-type distributions. In this paper, the cumulative fatigue damage of SM45C round bar specimens having a center hole resulting from block loading with p-distributions in rotating bending conditions, is presented. The value of p was changed in the range from 0.25 to 1; 0.25, 0.5, 0.75, 1. The following conclusions were obtained through the constant stress amplitude experiments and the block loading experiments. (1) In constant loading test, fatigue life was affected by cyclic rate. From experimental data, N$_{f}$ (100cpm)/N$_{f}$(3000cpm)equal to 0.56. (2) In case of the cyclic rate 100cpm and 3000cpm, at the high stress amplitude level the crack propagation life N$_{*}$f is longer than the low stress amplitude level. (3) Miner's hypothesis may be valid for p=0.75 and prediction of fatigue life by Haibach's method agree with experimental data well for the case p=0.5, while the modified Miner's method agree with experimental data well for the case p=0.25.5.

  • PDF