• The Korean Journal of Pain
• /
• v.30 no.2
• /
• pp.104-115
• /
• 2017

Background: C-arm fluoroscopy equipment is important for interventional pain management and can cause radiation injury to physicians and patients. We compared radiation safety education and efforts to reduce the radiation exposure of pain specialists. Methods: A survey of 49 pain specialists was conducted anonymously in 2016. The questionnaire had 16 questions. That questionnaire was about radiation safety knowledge and efforts to reduce exposure. We investigated the correlation between radiation safety education and efforts of radiation protection. We compared the results from 2016 and a published survey from 2011. Results: According to the 2016 survey, all respondents used C-arm fluoroscopy in pain interventions. Nineteen respondents (39%) had received radiation safety education. Physicians had insufficient knowledge about radiation safety. When the radiation safety education group and the non-education group are compared, there was no significant difference in efforts to reduce radiation exposure and radiation safety knowledge. When the 2011 and 2016 surveys were compared, the use of low dose mode (P = 0.000) and pulsed mode had increased significantly (P = 0.001). The number checking for damage to radiation protective garments (P = 0.000) and use of the dosimeter had also increased significantly (P = 0.009). But there was no significant difference in other efforts to reduce radiation exposure. Conclusions: Pain physicians seem to lack knowledge of radiation safety and the number of physicians receiving radiation safety education is low. According to this study, education does not lead to practice. Therefore, pain physicians should receive regular radiation safety education and the education should be mandatory.

• Journal of Environmental Science International
• /
• v.28 no.11
• /
• pp.959-969
• /
• 2019

This study sought to contribute to the revitalization of local economy by developing a natural recreation forest, which is the base of ecotourism recreation, through utilizing forest resources and the natural environment of Gwangju-si. The study conducted a feasibility assessment through on-site surveys such as the suitability of the candidate sites, location analysis, and possibility of damage to the forest, before developing recreation forest sites in Gwangju-si and, based on the result, selected appropriate subject sites. The candidates for this study were 5 forest sites such as one site in the Mokheon-dong area, two in the Docheok-myeon area, and one in the Toechon-myeon area. For this study, the current status of the natural recreation forest was surveyed, its feasibility index and assessment process were investigated, and the local status and related regulations of Gyeonggi-do and Gwangju-si were reviewed. The final subject sites were selected after feasibility assessment utilizing assessment index in order to evaluate the candidate sites. The feasibility assessment was conducted after three separate on-site surveys for each candidate site between October 2018 and January 2019 utilizing "The Feasibility Assessment Criteria for Natural Recreation Forest (Notification 2018-71)" of the Korean Forest Service. The items instrumental to the feasibility assessment were classified into landscape, location, water system, induction of recreation, and development condition; the assessment was made after redefining each item into detailed items. Through this process, the Usan-ri area was selected as the final site for developing natural recreation forest, having obtained more than 100 points according to "The Feasibility Assessment Criteria for Natural Recreation Forest" of the Korean Forest Service. In order to develop natural recreation forest in the Usan-ri area in the future, further discussion is necessary with the relevant departments in consideration of the degree of ecological zoning map.

• The Journal of Engineering Geology
• /
• v.27 no.1
• /
• pp.9-20
• /
• 2017

To date, several studies have been carried out to partially compare and analyze the resistivity values within the Yangsan fault zone through the electrical resistivity survey of the exposed fault zone. However, it is not easy to directly observe a large scaled fault like Yangsan fault that has been weathered, especially due to the weathering of the fault core. This study aimed to reveal the characteristics of location, geometry, the fault core zone as well as underground distribution of the associated fault damage zone, based on the results of electrical resistivity and micro-topographic surveys as well as field geology survey in the southern Yangsan fault zone (Eonyang area). The resistivity anomaly zones developed in the NNE to NE direction were confirmed by the electrical resistivity survey. According to the electrical resistivity, micro-topographic, and field geologic surveys, the Yangsan fault has been formed by three to five fault cores, fault damage zones and/or fractured zones.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.8 no.1
• /
• pp.17-26
• /
• 2004

Pest monitoring through field surveys and surveillance helps in forecasting the population build up of pest. It reduces the load of pesticides application and forms the basis of Integrated Pest Management in sericulture. Common sampling techniques for quantifying pest populations and damage caused by them are reviewed emphasizing the need for quick and simple sampling methods. Various direct and indirect sampling methods for establishing pest populations are discussed and methods have been discussed to use indirect sampling method under IPM programme in sericulture. The use of pheromone lures and traps forms one of the important ingredients of integrated pest management, which calls for integration of all available methods in a cost effective and environmental friendly manner offering consistent efficacy. Silk-worms feed on the variety of silk host plants and spin cocoons. Each silk host plant is attacked in the field by number of insect pest species. Several pests are common to mulberry, tasar, oak tasar, muga and eri host plant but pest status and seasonal abundance differs from each crop. The key pests are serious perennially occurring persistent species which cause considerable yield loss every year on large areas and require control measure. Regular occurrence of minor pest is noticed but sudden increase in its population is not known. The occasional pests are sporadic but potential causing sufficient damage. Silk losses due to attack of all the pests have not been calculated. However, information on pest biology and ecology, and control practices being practiced is available but the period of outbreak of major pests and predators on silkworms and its host plant needs to be reinvestigated. Pest and predators forecasting based on surveillance information may provide an opportunity to minimize the losses, particularly to reduce expenditure involved in pest management.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.1439-1444
• /
• 2005

Induction motors are the most commonly used electrical drives because they are rugged, mechanically simple, adaptable to widely different operating conditions, and simple to control. The most common faults in squirrel-cage induction motors are bearing, stator and rotor faults. Surveys conducted by the IEEE and EPRI show that the most common fault in induction motor is bearing failure (${\sim}$40% of failure). Thence, this paper addresses experimental results for diagnosing faults with different rolling element bearing damage via motor current spectral analysis. Rolling element bearings generally consist of two rings, an inner and outer, between which a set of balls or rollers rotate in raceways. We set the experimental test bed to detect the rolling-element bearing misalignment of 3 type induction motors with normal condition bearing system, shaft deflection system by external force and a hole drilled through the outer race of the shaft end bearing of the four pole test motor. This paper takes the initial step of investigating the efficacy of current monitoring for bearing fault detection by incipient bearing failure. The failure modes are reviewed and the characteristics of bearing frequency associated with the physical construction of the bearings are defined. The effects on the stator current spectrum are described and related frequencies are also determined. This is an important result in the formulation of a fault detection scheme that monitors the stator currents. We utilized the FFT, Wavelet analysis and averaging signal pattern by inner product tool to analyze stator current components. The test results clearly illustrate that the stator signature can be used to identify the presence of a bearing fault.

• Korean Journal of Environment and Ecology
• /
• v.23 no.2
• /
• pp.220-232
• /
• 2009

The objective of this study was to understand the relationships between forest vegetation characteristics and the damage of Oak wilt disease. Field surveys were carried out for two groups. One group(Group A) consists of Oak wilt infected 18 sites from 7 provinces, and the other group(Group B) consists of 5 permanent sites where data on the relative density of entrance holes drilled by Platypus koryoensis., the vector of Oak wilt disease, were available. Survey results showed that 17 of 18 sites were dominated by Quercus spp.(Group A) and also showed a significant positive relationship($R^2=0.89$, P<0.05) between the relative density of entrance holes and the relative density of Quercus spp.(Group B) implying that the susceptibility to Oak wilt disease is related with the high dominance of Quecus spp. in a forest stand.

• Journal of Korean Society of Forest Science
• /
• v.89 no.3
• /
• pp.306-309
• /
• 2000

The black pine bast scale (BPBS), Matsucoccus thunbergianae, causes serious damage to Japanese black pine forests in the southern part of Korean peninsula. After first detection of its damage in Kohung, Chonnam Province in 1963, the distribution has been expanding gradually year by year. Since 1983, extensive surveys for BPBS distributions have been carried out by Korea Forest Research Institute. We used cumulative data for BPBS distribution and analyzed the dispersal pattern. We divided expansions into three directions such as north along the west coast, northeast towards the inland, and east along the south coast. In the direction of northeast the dispersal rate was approximately 4.3km per year in dense forests of Japanese black pine, but it slowed down since the early 1990s. The annual dispersal rates were approximately 5.9 and 3.3km in north and east directions, respectively.

• Journal of Korean Society on Water Environment
• /
• v.27 no.6
• /
• pp.885-895
• /
• 2011

The purpose of this study was evaluated on achievement of the Target water quality (TWQ) with Load Duration Curve (LDC) as well as materials collected through the implementation of Total Maximum Daily Load (TMDL), targeting 41 unit watersheds in the Nakdong River Basin in korea, and examines the adequacy of the LDC method to evaluate the TWQ by comparing methods through current regulations. It aims to provide basic materials for TMDL development in Korea. This determination resulted from the fact that the measured data placed on the LDC mean that they are beyond TWQ in a certain condition of water flow when actually measured load values were displayed in a form of LDC. In addition to water quality surveys, it is considered that information on the level of damage in a water body by water flow grade can be utilized as a basic material to identify compliance with the total admitted quantity, and establish rational plans to improve water quality. This information helps in the identification of the degree of damage in water quality according to water flow.

• Journal of the Korean Geosynthetics Society
• /
• v.19 no.4
• /
• pp.95-109
• /
• 2020

In this study, a total of six site cases were reviewed to assess the site applicability of portable dynamic cone penetration test (DCPT) by identifying the cause of damage to the damaged reinforced earth wall using portable dynamic cone penetration test. An improved dynamic concrete penetration tester was used at the site to enable ground surveys of more than 6 meters. The test results were compared with the results of the standard penetration test (SPT) and the correlation was analyzed. Through the analysis of various field application cases, it was found that portable dynamic cone penetration test was very convenient to apply at the site of the damaged reinforced earth wall, and DCPT could play a major role in identifying the cause of damage and verifying stability of the retaining wall by continuously identifying the ground strength. In addition, it was found that the results of the dynamic cone penetration test and the standard penetration test showed a correlation of N≒(1/3~2/3)·Nd in sandy soil.

• Journal of Korean Society of Disaster and Security
• /
• v.15 no.4
• /
• pp.71-78
• /
• 2022

Recently, mountain disasters such as landslides and debris flows have flowed along mountain streams and hit residential areas and roads, increasing damage. In this study, in order to reduce damage and analyze causes of mountain disasters, field surveys and Terrestrial LiDAR terrain analysis were conducted targeting debris flow areas, and debris flow flow processes were simulated using FLO-2D and RAMM models, which are numerical models of debris flows. In addition, the debris flow deposition area was calculated and compared and analyzed with the actual occurrence section. The sedimentation area of the debris flow generation section of the LiDAR scan data was estimated to be approximately 21,336 ㎡, and was analyzed to be 20,425 ㎡ in the FLO-2D simulation and 19,275 ㎡ in the case of the RAMMS model. The constructed topographical data can be used as basic data to secure the safety of disaster risk areas.