• 한국염색가공학회지
• /
• 제33권4호
• /
• pp.269-279
• /
• 2021

In this study, the laminating of TPU film after coating of primer adhesive on the fabrics was applied in order to secure the strength to withstand a fall from a higher altitude by increasing the adhesion between the fabric and the film layer. It seems that the fineness of the yarn and the weave construction have a greater effect than the type of the laminating films. The order of superiority of the laminated fabrics by film type and thickness was the same for 1000 denier and 210 denier fabrics, and the tendency was consistent with the order of superiority in the film properties and peel strength tests. The tear strength of laminating fabrics increased three to four times for 1000 denier fabrics compared to the fabric alone, but it decreased by 2 times for the 210 denier fabrics. Summarizing the above results, it is most appropriate to combine 1000d fabric with three types of laminating films(100~200㎛ thickness) of A(0.2T) or B(0.15T) or D(0.1T) considering the air pressure resistance, the impact resistance during the fall, and the durability against damage during use.

• 보존과학회지
• /
• 제34권5호
• /
• pp.319-331
• /
• 2018

국립현대미술관 소장품인 '산수'는 1940년에 제작된 6폭 구성의 병풍이다. 10대가로 불리던 서화가 6명이 제작에 참여한 합작품으로 소석 강진구 선생의 회갑을 축하하기 위한 축수의 목적으로 제작되었다. 과거 수리된 부분이 확인되었음에도 불구하고 병풍틀의 뒤틀림, 습기얼룩 및 오염 등 보존상태가 양호하지 않아 장기적 보존 및 전시활용을 위해 보존처리가 진행되었다. 또한 재질특성을 확인하고자 제작에 사용된 직물섬유, 종이섬유, 안료에 대한 과학적 조사와 분석을 실시하였다. 분석 결과, 화본 및 회장비단에 사용된 직물섬유는 면, 견 등의 천연섬유와 함께 합성섬유가 사용되었음을 확인할 수 있었다. 병풍 속틀에 사용된 종이의 경우 닥나무 인피섬유, 초본류, 침엽수 섬유 등 다양한 수종이 관찰되었다. 안료분석 결과, 모든 작품의 바탕층에서 Calcite가 확인되었고, 색상별 일부 착색안료는 작가에 따라 차이를 보였다.

• 복식
• /
• 제57권3호
• /
• pp.14-22
• /
• 2007

This study is about the excavated costume representing fundamental "Conservation and Restoration". It's not a report of a specific case, but it is a guideline that contains the costume and textile of museum collection. It is not research based on experiments; however, this paper is basically consists of various reported-documents. Followings are the conclusions of this study 1. These are the factors that we have to know to prevent the causes of fabric's degradation. -Light, -Humidity and temperature, -Microscopic organism, -Insect and rodent animal, -Air pollution, -Ph, -Handling 2. Basic principles of conservation and restoration follows are: -Select the Reversible method, -Represent the easily distinguishable repaired place, -Should be acted by an expert or people with experience, -Before the restoration, accurate and specified records should be completed, -Procedure, treatment method, and materials used should be recorded prior to restoration, -Should be cared minimally, -Be cautious when using the conservation materials, -When caring, make sure nothing is against the principle of aesthetic, historic, and form of preservation 3. The types of restoration are type of straight or curve, type of hole, type of without warp or weft, type of special part damage something like sleeve, collar, type of form that is severely damaged, and type of separated pieces. 4. The method of restoration is sewing, stitching, and the combination of sewing and stitching. 5. The restoration seams are welt seam, plain seam, flat felled seam, french seam etc. And there are kinds of used-sewing, such as, broad stitching, backstitch, half backstitch, basking, hemming, saddle stitching etc.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2005년도 추계 학술대회논문집
• /
• pp.93-97
• /
• 2005

Air interlacing serves to protect the yarn against damage, strengthens inter-filament compactness or cohesion, and ensures fabric consistency. The air interlacing nozzle is used to introduce intermittent nips to a filament yarn so as to improve its performance in textile processing. This study investigates the effect of interlacing nozzle geometry on the interlacing process. The geometries of interlacing nozzles with multiple air inlets located across the width of a yarn channels are investigated. The basic interlacing nozzle is the yarn channel, with a perpendicular single air inlet in the middle. The yarn channel shapes are cross sections with semicircular or rectangular shapes. This paper presents three doubled sub air inlets with main air inlet and one of them is slightly inclined doubled sub air inlets with main air inlet. The compressed air coming out from the inlet hits the opposing wall of the yarn channel, divides into two branches, flows trough the top side of yarn channel, joins with the compressed air coming out from the sub air inlet and then creates two free jets at both ends of the yarn channel. The compressed air moves in the shape of two opposing directional vortices. The CFD-FASTRAN was used to perform steady simulations of impinging jet flow inside of the interlace nozzles. The vortical structure and the flow pattern such as pressure contour, particle traces, velocity vector plots inside of interlace nozzle geometry are discussed in this paper.

• 복식
• /
• 제63권7호
• /
• pp.65-78
• /
• 2013

This study aims to suggest the methodology for conservation of excavated costumes especially repair and restoration process. Early excavated costumes had not attracted attention from the field of academia and the public. So not many scholars, organization and society participated in the excavations but as its value has gotten more recognition, there has been a reversal in trend. And so many organizations have taken part in it. Excavating includes conservation processes such as washing, repair and restoring, and then it is published by reports or books after the process is complete. However the method of conservation has varied depending on the institution. In particular, repair and restore methods do not include anything specific details, and often times, only has descriptions of the before and after state, and so a more unified method needs to be suggested and shared. This study defined 'Conservation', 'Repair' and 'Restoration' and then applied it to the short history of Korean excavated-costumes. Then it suggested ways to repair and restore excavated-costumes in terms of construction, textile, and damage by the unpublished cases of excavated-costumes of Noh Su-ham(1516~1573)'s Family. It was also referred to repair and restoration process such as shaping correction, dyeing, supporting, sewing and after treatment by texts and pictures. Other contents such as a list of relics and its details, will be published through a report or a book. The whole process of conservation was in progress based on the ethical guidelines of conservation, 'Minimum intervention' and 'Reversibility'.

• 패션비즈니스
• /
• 제9권1호
• /
• pp.79-88
• /
• 2005

The purpose of this study is to propose the design of the patient's clothes for a disabled child between 4 and 6. For this, in this study, I would present the following design plan which includes 3 upper garments, 2 trousers and a one-piece dress. In case of the damage on head and neck, a neck line should be deep and wide thereby providing ease to the clothes. To facilitate injection and dressing/undressing, there should be parting from neck to cuff which can be fixed by snap or button. By rolling up sleeves with strings inside the cuffs and fixating plaster cast with snap button outside the cuffs. In case of body cast with plaster cast around body part, front adjusting part should be wider and the width should be adjusted with strings. In case of hip spica cast which covers waist, I separated front part and rear part, fixated them with snap buttons, gave more width to front adjusting part with strings to adjust width, which constitute one-piece dress. In case of shoulder spica cast, the other shoulder which is not covered with plaster cast should be exposed, and to prevent clothes' coming down, strings with snap button or velcro should be attached over a shoulder so that the length of the strings can be adjusted. In case of applying plaster cast or aid to the whole part of a leg, one part of trousers should be shorter so as to expose the injured part and there should be a parting with strings or velcros on the side for easy dressing/undressing. When plaster cast or splint is short, The strings are meant to adjust length of trousers. The partings are located 2 cm from side lines toward the center.

• 한국염색가공학회지
• /
• 제20권6호
• /
• pp.42-50
• /
• 2008

The objective of this study is to investigate the efficacy of pomegranate hull colorant as a natural hair coloring dye. The extract of pomegranate hull was concentrated and freeze-dried to get colorant powder. Effect of dyeing condition and mordanting on the dye uptake of hair by using Al, Fe, Cu, Cr, Sn compounds, color change and colorfastness were explored. In addition, tensile strength was measured and the surface of the hair was observed. Dye uptake of hair measured by K/S value (400 nm) indicated that ionic bonding seems to be involved in the sorption of pomegranate colorant to hair. Maximum sorption was obtained at pH 3.5 and the concentration of 50% (on the weight of hair, o.w.h.). Acidic dyeing condition (pH $3.5{\sim}5.0$) showed yellow color however alkaline dyeing condition (pH $7{\sim}11$) gave reddish yellow color. Pomegranate hull colorant produced greyish brown color on hair and the hair mordanted with Fe showed dark brown color. Mordants except Fe did not increase dye uptake significantly. Mordants except Cu increased light fastness and mordants except Cr increased washing fastness level slightly. According to SEM observation and the tensile strength retention measurement, the mordant dyed hair gave more damage to hair by ultraviolet light and washing than the hair dyed without mordanting. Experimental results of K/S value and colorfastness(light and washing) supported that pomegranate hull colorant without mordanting can be used as a semi-permanent natural hair coloring dye.

• 한국염색가공학회지
• /
• 제35권3호
• /
• pp.159-168
• /
• 2023

Polyolefin elastomer (POE) is widely used in a variety of applications, particularly in the manufacture of composites, due to its excellent mechanical properties, chemical resistance, and flexibility. However, POE has a high processing temperature, which causes damage to the fiber during the manufacturing process when impregnating the fiber. Therefore, ethylene vinylacetate (EVA), which has a low melting point and excellent adhesion properties, is blended with POE to reduce the processing temperature, and POE-g-MAH (Polyolefin elastomer-grafted-maleic anhydride) is used as a compatibilizer to further improve the POE/EVA blend properties. The compatibility of POE/EVA blends is observed by SEM, and the interaction between each polymer is confirmed by DSC and FT-IR. In addition, the effect of adding the compatibilizer is analyzed through mechanical properties such as tensile strength and elongation. The optimal content of compatibilizer for POE/EVA blends considering physical properties and moldability is sought, and 20 phr is determined to be the most appropriate.

• 한국염색가공학회지
• /
• 제32권3호
• /
• pp.176-183
• /
• 2020

In order to study wearable air cushion materials capable of responding to massive impact in high-altitude fall situation, high tenacity woven fabrics were bonded by heat only depending on various type of thermoplastic films and then mechanical properties were measured. Tensile strength, elongation, and 100% modulus measurement results for 4 types of films show that TPU-2 has higher impact resistance and easier expansion than PET-1. After thermal bonding, the combination with the highest tensile strength was a material with a TPU-2 film for nylon and a PET-2 film for PET, so there was a difference by type of fabric. The tear strength of the bonded materials were increased compared to the fabric alone, which shows that durability against damage such as tearing can be obtained through film adhesion. All of the peel strengths exceeded the values required by automobile airbags by about 5 times, and the TPU-2 bonded fabric showed the highest value. The air permeability was 0 L/dm2 /min. For both the film and the bonded material, which means tightness between the fabric and the film through thermal bonding. It is expected to be applied as a wearable air cushion material by achieving a level of mechanical properties similar to or superior to that of automobile airbags through the method of bonding film and fabric by thermal bonding.

• 대한기계학회논문집A
• /
• 제35권8호
• /
• pp.951-956
• /
• 2011

원자력 발전설비의 증기발생기용 세관 재료로 인코넬 합금이 사용되고 있다. 인코넬 합금은 고니켈과 크롬의 합금으로 고온에서 내부식성이 뛰어난 특성을 가지고 있다. 본 연구에서는 인코넬 600 과 690 합금에 대해 실제 원전의 운전온도, 즉 $320^{\circ}C$가 프레팅 피로 거동에 미치는 영향에 대해 연구해보았다. 그 결과 $320^{\circ}C$에서의 단순 피로한도와 프레팅 피로한도가 상온에서의 단순 및 프레팅 피로한도에 비해 다소 저하하는 것을 알 수 있었다. 아울러 하중 반복회수와 마찰력의 변화 특성도 얻었다. 또한 파단면을 전자현미경으로 관찰하여 프레팅 피로기구도 검토해 보았다. 이와 같은 결과는 실제 운전온도에서 프레팅을 받는 증기발생기의 구조건전성 평가에 활용 가능할 것으로 생각된다.