• Korean Journal of Construction Engineering and Management
• /
• v.22 no.1
• /
• pp.81-89
• /
• 2021

In recent years, the design of buildings is changing from formal to creative and freeform. Accordingly, the scale of construction technology is changing to architectural design and construction of irregular buildings. Using the FDM method, which is one of the 3D printing technologies, it is possible to manufacture various forms of irregular formwork inexpensively and quickly coMPared to the existing formwork, and it seems to be able to solve the manpower problem. Using a 3D printer, the PLA filament formwork is produced in the form of a cylinder and a rectangular cuboid, and the usability of the PLA filament formwork is confirmed by examining the compression strength test and the degree of deformation and reusability over 28 days of age. Different sizes of additional specimens are also conducted according to the size. As a result of the experiment, it was confirmed that the filament formwork itself has about 3~4MPa strength. As a result of reviewing data through existing linear studies and experiments, it is appropriate to use more than 60% infill, and it is advantageous in terms of strength. As a result of cutting and dismantling the filament formwork, the surface is very clean and there is no damage, so it can be reused.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.16 no.4
• /
• pp.69-81
• /
• 2006

The Computer Forensics is a research area that finds the malicious users by collecting and analyzing the intrusion or infringement evidence of computer crimes such as hacking. Many researches about Computer Forensics have been done so far. But those researches have focussed on how to collect the forensic evidence for both analysis and poofs after receiving the intrusion or infringement reports of hosts from computer users or network administrators. In this paper, we describe how to collect the forensic evidence of good quality from observable and protective hosts at the time of infringement occurrence by malicious users. By correlating the event logs of Intrusion Detection Systems(IDSes) and hosts with the configuration information of hosts periodically, we calculate the value of infringement severity that implies the real infringement possibility of the hosts. Based on this severity value, we selectively collect the evidence for proofs at the time of infringement occurrence. As a result, we show that we can minimize the information damage of the evidence for both analysis and proofs, and reduce the amount of data which are used to analyze the degree of infringement severity.

• The Journal of Engineering Geology
• /
• v.30 no.4
• /
• pp.589-602
• /
• 2020

As can be seen in many earthquakes, liquefaction causes differential settlement, which sometimes produces serious damages such as building destruction and ground subsidence. There are many possible active faults near the Busan city and the Yangsan, Dongrae, and Ilgwang faults among them pass through the city. The Busan city is also located within the influence of recent earthquakes, which occurred in the Gyeongju, Pohang, and Kumamoto (Japan). Along the wide fault valleys in the city, the Quaternary unconsolidated alluvial sediments are thickly accumulated, and the reclaimed lands with beach sediments are widely distributed in the coastal area. A large earthquake near or in the Busan city is thus expected to cause major damage due to liquefaction in urban areas. This study conducted an assessment of the liquefaction hazard according to seismic recurrence intervals across the Busan city. As a result, although there are slight differences in degree depending on seismic recurrence intervals, it is predicted that the liquefaction potential is very high in the areas of the Nakdonggang Estuary, Busan Bay, Suyeong Bay, and Songjeong Station. In addition, it is shown that the shorter the seismic recurrence interval, the greater difference the liquefaction potential depending on site periods.

• Conservation Science in Museum
• /
• v.25
• /
• pp.9-26
• /
• 2021

This paper describes the production methods that were originally used for an arrow bundle excavated from a Bronze Age residential area in Auraji in Jeongseon, Gangwon-do Province and the conservation treatment process that it subsequently underwent. An arrow conventionally consists of an arrowhead and a shaft. It is rare to excavate a shaft along with an arrowhead in a complete form since the shaft is made of organic materials. Notably, the arrow bundle from the Auraji site is of great significance as it shows traces of tangless stone arrowheads attached to charred shafts and offers an important case of the split end of a piece of a tree being inserted into an arrowhead. For a further examination of the characteristics of the arrows from Auraji, microscopic investigation was conducted and the type of wood used for the arrow shafts was examined. The sequence and direction of processing and the particle sizes of the grinding tools were revealed through the analysis of traces of grinding on the stone arrowheads. The shaft is presumed to have been made from a green length of three-year-old willow (Salix spp.). A curing agent with a high degree of waterproofing and reversibility was used during the on-site curing process according to demands of the surrounding environment, and a technique that the authors call the "Bridge" method was used for emergency collection of the relics. Once the bundle was transferred to the conservation treatment lab, reinforcing materials were carefully chosen as it was important not to damage the relics during the process of turning them for the repair of their reverse sides. For this purpose, artificial clay was selected since it can safely bear a load and has excellent physical properties. Finally, detached parts were rejoined, the relics and their surrounding materials were cleaned, and the bottom sides were finished with epoxy resin prior to the display of the relics at the museum.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.23 no.4
• /
• pp.222-234
• /
• 2021

Airborne-pests can be introduced into Korea from overseas areas by wind, which can cause considerable damage to major crops. Meteorological models have been used to estimate the wind trajectories of airborne insects. The objective of this study is to analyze the effect of input settings on the prediction of areas where airborne pests arrive by wind. The wind trajectories were predicted using the HYbrid Single-Particle Lagrangian Integrated Trajectory (HYSPLIT) model. The HYSPLIT model was used to track the wind dispersal path of particles under the assumption that brown plant hopper (Nilaparvata lugens) was introduced into Korea from sites where the pest was reported in China. Meteorological input data including instantaneous and average wind speed were generated using meso-scale numerical weather model outputs for the domain where China, Korea, and Japan were included. In addition, the calculation time intervals were set to 1, 30, and 60 minutes for the wind trajectory calculation during early June in 2019 and 2020. It was found that the use of instantaneous and average wind speed data resulted in a considerably large difference between the arrival areas of airborne pests. In contrast, the spatial distribution of arrival areas had a relatively high degree of similarity when the time intervals were set to be 1 minute. Furthermore, these dispersal patterns predicted using the instantaneous wind speed were similar to the regions where the given pest was observed in Korea. These results suggest that the impact assessment of input settings on wind trajectory prediction would be needed to improve the reliability of an approach to predict regions where airborne-pest could be introduced.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.35 no.3
• /
• pp.141-148
• /
• 2022

In this study, the structural behavior of reinforced concrete members under simultaneous axial and blast loads was analyzed. Nonlinear dynamic analysis verification was performed using the experimental data of panels under fundamental blast load as well as those of reinforced concrete columns subjected to axial and blast loads. Because Autodyn is a program designed only for dynamic analysis, an analysis process is devised to simulate the initial stress state of members under static loads, such as axial loads. A total of 80 nonlinear dynamic finite element analysis procedures were conducted by selecting parameters corresponding to axial load ratios and scaled distances ranging 0%~70% and 1.1~2.0 (depending on the equivalent of TNT), respectively. The structural behavior was compared and analyzed with the corresponding degree of damage and maximum lateral displacement through the changes in axial load ratio and scaled distance. The results show that the maximum lateral displacement decreases due to the increase in column stiffness under axial loads. In view of the foregoing, the formulated analysis process is anticipated to be used in developing blast-resistant design models where structural behavior can be classified into three areas considering axial load ratios of 10%~30%, 30%~50%, and more than 50%.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.25 no.1
• /
• pp.25-38
• /
• 2022

Urban problems are constantly occurring around the world due to rapid industrialization and population decline. In particular, as the number of vacant houses is gradually increasing as the population decreases, it is necessary to prepare countermeasures. A plan to utilize vacant houses has emerged to restore the natural environment of the urban ecosystem where forest destruction, damage to habitats of wild animals and plants, and disconnection have occurred due to large-scale development. Through connectivity analysis, it is possible to understand the overall ecosystem flow based on the movement of species and predict the effect when vacant houses are converted into green spaces. Therefore, this study analyzed the green area network to confirm the possibility of greening of vacant houses neglected in Jeonju based on circuit theory. Using Circuitscape and Least-cost path, we tried to identify the connectivity of green areas and propose an ecological axis based on the analysis. In order to apply the resistance values required for analysis based on previous studies, the 2020 subdivision land cover data were integrated into the major classification evaluation items. When the eight forests in the target site were analyzed as the standard, the overall connectivity and connectivity between forests in the area were high, so it is judged that the existing green areas can perform various functions, such as species movement and provision of habitats. Based on the results of the connectivity analysis, the importance of vacant houses was calculated and the top 20 vacant houses were identified, and it was confirmed that the higher the ranking, the more positive the degree of landscape connectivity was when converted to green areas. In addition, it was confirmed that the results of analyzing the least-cost path based on the resistance values such as connectivity analysis and the existing conceptual map showed some differences when comparing the ecological axes in the form. As a result of checking the vacant houses corresponding to the relevant axis based on the width standards of the main and sub-green areas, a total of 30 vacant houses were included in the 200m width and 6 vacant houses in the 80m width. It is judged that the conversion of vacant houses to green space can contribute to biodiversity conservation as well as connectivity between habitats of species as it is coupled with improved green space connectivity. In addition, it is expected to help solve the problem of vacant houses in the future by showing the possibility of using vacant houses.

• The Journal of the Korea Contents Association
• /
• v.21 no.11
• /
• pp.490-502
• /
• 2021

Horticultural facility farmers subscribe to crop accident insurance and insurance products secured by horticultural facilities in preparation for possible risks in the facility. Insurance is purchased to prepare for natural disasters such as typhoons, hail, frostbite, heavy rain, and strong wind damage covered by the product. In order to find out the effect of risk perception, which is a subjective perception of the risks of a given situation, on horticultural facility farmers' intention to purchase horticultural facility insurance products, the risk perception and insurance purchase intention were analyzed. A t-test was conducted to determine the impact relationship between farm size, insurance coverage, and risk perception, and multiple regression analysis was conducted to verify the effect of personal characteristics and behavioral factors such as subjective perception, reference group, media exposure, and compensation understanding. In addition, a three-step regression analysis by Baron & Kenny was conducted to confirm the mediating role of personal characteristics and behavioral factors in the relationship between risk perception and insurance purchase intention. As a result of the study, although there was no difference in farm size, it was analyzed that policy holders had a higher degree of risk perception than non-subscribers, and that compensation understanding had the greatest influence and subjective knowledge had the smallest influence. In addition, these four factors were verified to have a mediating effect on the relationship between risk perception and insurance purchase intention. These results are expected to provide practical help to the development and marketing activities of horticultural facility insurance products.

• Journal of the Korean Society of Radiology
• /
• v.16 no.7
• /
• pp.961-968
• /
• 2022

Rotator cuff tears are a leading cause of shoulder pain in adults. Due to the increase in social activities, the number of patients complaining of shoulder pain is increasing, and interest in shoulder diseases is also increasing. With the development of ultrasound equipment, the sensitivity and specificity of diagnosis are high, and it is used to diagnose rotator cuff tears in musculoskeletal disease. Ultrasound is recognized as a complementary method to MRI examination in rotator cuff tears. Therefore, this study aimed to find out the diagnostic usefulness of ultrasound and MRI examinations in the diagnosis of shoulder rotator cuff tears.A retrospective analysis was performed on 262 patients who were diagnosed with final rotator cuff damage by arthroscopy after completing ultrasound and MRI examinations. Sensitivity, feature, positive predictive value, image predictive value, and touch were disassembled for the test results. In addition, the degree of clavicular tear was scored and recorded in 5 stages. Ultrasound examination was similar to MRI examination results for both full-thickness and partial tears, and there was no statistically significant difference. Partial tear test results showed higher positive predictive value and accuracy than MRI test. In conclusion, ultrasound can be fully utilized as a screening test for rotator cuff disease, and it is thought that it will be selected and used clinically according to the patient's constitution and situation.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.27 no.7
• /
• pp.1031-1037
• /
• 2021

The frequency of marine accidents of vessels in Korea is steadily increasing and it is concentrated on small vessels with less than 10 tons of gross tonnage. Therefore, preventing capsizing accidents in small vessels is important to reduce the cost in terms of human and property damage due to such accidents. However, research on the seakeeping performance of small vessels has been insufficient, and there are no domestic and international regulations on seakeeping performance. Therefore, in this study, capsizing accidents caused by poor loading conditions were investigated by examining the adjudications of the small vessels in which the capsizing accidents occurred. Hydrostatic calculations and seakeeping performance analysis were performed for a representative vessel. A vessel generally performs a six-degree-of-freedom motion during operation. In this study, the response amplitude operator and response spectrum of a representative vessel were calculated to determine the roll motion. Moreover, a short-term statistical analysis of the vessel according to the loading conditions was performed for the wave stationary status for 3 h. From the results, it was estimated that, when the loading condition of a small vessel is poor, its roll motion increases, greatly reducing its stability.