• 대한기계학회논문집A
• /
• 제26권5호
• /
• pp.835-842
• /
• 2002

In this paper, static and fatigue bending strengths and failure mechanisms of CFRP (carbon fiber reinforced plastics) laminates having impact damages have been evaluated. Composite laminates used for this experiment are CF/EPOXY orthotropy laminated plates, which have two-interfaces $[0^0_ 4/90^0_4]_{ sym}$. A steel ball launched by the air gun collides against CFRP laminates to generate impact damages. The damage growth during bending fatigue test is observed by the scanning acoustic microscope (SAM) and also, the fracture surfaces were observed by using the SEM (scanning electron microscope). In the case of impacted-side compression, fracture is propagated from the transverse crack generated near impact point. On the other hand, fracture is developed toward the impact point from the edge of interface-B delamination in the case of impacted-side tension. Eventually, failure mechanisms have been confirmed based on the observed delamination areas and fracture surfaces.

• 대한기계학회논문집A
• /
• 제30권4호
• /
• pp.393-401
• /
• 2006

The influences of stress triaxiality on ductile fracture have been investigated for various specimens and structures. With respect to a transferability issue, recently, the interests on local approaches reflecting micromechanical specifics are increased again due to rapid progress of computational environments. In this paper, the applicability of the local approaches has been examined through a series of finite element analyses incorporating modified GTN and Rousselier models as well as fracture toughness tests. The ductile crack growth of nuclear carbon steels is assessed to verify the transferability among compact tension (CT) specimens with different in-plane size. At first, the basic material constants were calibrated for standard CT specimens and used to predict fracture resistance (J-R) curves of larger CT specimens. Then, the in-plane size effects were examined by comparing the numerically estimated J-R curves with the experimentally determined ones. The assessment results showed that the in-plane size effect should be considered for realistic engineering application and the damage models might be used as useful tool for ductile fracture evaluation.

• Computers and Concrete
• /
• 제25권1호
• /
• pp.15-27
• /
• 2020

During the past decades, the application of acoustic emission techniques (AET) through the diagnosis and monitoring of the fracture process in materials has been attracting considerable attention. AET proved to be operative among the other non-destructive testing methods for various reasons including their practicality and cost-effectiveness. Concrete and rock structures often demand thorough and real-time assessment to predict and prevent their damage nucleation and evolution. This paper presents an overview of the work carried out on the use of AE as a monitoring technique to form a comprehensive insight into its potential application in brittle materials. Reported properties in this study are crack growth behavior, localization, damage evolution, dynamic character and structures monitoring. This literature review provides practicing engineers and researchers with the main AE procedures to follow when examining the possibility of failure in civil/resource structures that rely on brittle materials.

• 한국재료학회지
• /
• 제21권11호
• /
• pp.623-627
• /
• 2011

This is a study on the distribution of acoustic emission parameters during a burst test for a type-II CNG vehicle fuel tank. A resonant AE sensor with a central frequency of 150 kHz was attached to the composite materials in the center of the fuel tank. The pressure was increased from 30 to 100% of the expected burst pressure and was maintained for 10 minutes at each level. Damage at 70% of expected burst pressure occurred by various damage mechanisms including fiber breakage and delamination, while that of below 60% only occurred by matrix crack initiation and growth. The count, duration and rise time of the AE signal at 60% of the expected burst pressure are distributed below 500, 5000 ${\mu}s$ and 300 ${\mu}s$, respectively. Then, at above 70% they increased with pressure by superimposing of individual AE signal generated at a nearby place. These results confirmed that the analysis of the distribution of AE parameters is an effective tool for estimating damage of a CNG fuel tank.

• 한국정밀공학회지
• /
• 제28권5호
• /
• pp.537-542
• /
• 2011

The thermo-mechanical interaction between brake block and wheel tread during braking has been found to cause thermal crack on the wheel tread. Due to thermal expansion of the rim material, the thermal cracks will protrude from the wheel tread and be more exposed to wear during the wheel/block contact than the rest of the tread surface. The wheel rim is in residual compression stress when is new. After service running, the region in the tread has reversed to tension. This condition can lead to the formation and growth of thermal cracks in the rim which can ultimately lead to premature failure of wheel. In the present paper, the thermal cracks of railway wheel, one of severe damages on the wheel tread, were evaluated to understand the safety of railway wheel in running condition. The residual stresses for damaged wheel which are applied to tread brake are investigated. Mainly X-ray diffusion method is used. Under the condition of concurrent loading of continuous rolling contact with rails and cyclic frictional heat from brake blocks, the reduction of residual stress is found to correlate well with the thermal crack initiation.

• 터널과지하공간
• /
• 제18권5호
• /
• pp.328-337
• /
• 2008

굴착손상권의 특성 및 범위를 규명하는 것은 방사성 폐기물의 이동 및 확산의 위험을 최소화하는 지하공동의 기밀에 영향을 받는 방사성폐기물 처분사업에선 중요하다. 캐나다 AECL의 URL에선 터널기밀시험(TSX)이 수행되었고, 굴착손상권(EDZ)의 발달 가능성을 최소화하기 위하여 응력장을 고려하여 터널 형태 및 방향을 선택하였다. EDZ의 특성 및 범위는 방사상의 시추공내에서의 탄성파 속도와 투수율 측정을 통하여 파악되었다. 이 결과는 EDZ의 범위를 추정하는 본 연구의 모델링작업에 사용되었다. 이를 위하여 UDEC 코드내에 손상모델을 형성하고, 실내실험 물성에 맞추었다. 이 모델은 TSX 터널 주변의 균열 개시와 성장범위를 예측하는데 사용되었고, 해석결과는 실제 측정된 손상과 비교되었다. 수치모델내 손상권의 발달은 현장 측정결과의 잘 일치하는 것으로 나타났다.

• 대한기계학회논문집A
• /
• 제40권6호
• /
• pp.531-537
• /
• 2016

기계 혹은 구조물의 파손 및 파괴는 소재의 내부에 존재하는 결함에서 발생하는 크랙에 의한 것이다. 이러한 크랙들은 밀집하여 존재하는 경우가 많기 때문에 크랙의 진전 및 성장특성들을 고려하지 않으면 안 된다. 이에 따라 본 연구에서는 표준 CT 시험편 내부의 크랙 및 구멍의 위치에 따른 파괴특성을 고찰하였으며, 표준CT 시험편에 편심된 집중하중을 가하였을 때, 시험편 내 크랙 주변의 구멍의 존재유무 및 위치에 따른 파괴역학적 거동에 대하여 규명하였다. 연구 결과로서 Model 3(크랙 주변에 구멍이 한 개 존재하는 시험편 모델로서 크랙의 끝부분과 구멍 간의 거리 가로방향으로 2mm의 경우)가 최대 변형량, 최대 응력 및 최대 변형 에너지, 모두 가장 크게 나타났으며, 모든 시험편 모델들이 시험편 내부의 크랙과 구멍의 거리가 가까울수록 최대 응력이 커지는 경향을 보였다. 또한 구멍의 개수와는 별개로 시험편 내부의 크랙 가까이에 구멍이 존재할 때 크랙 가까이에서 최대 응력은 커지는 경향이 나타나는 것을 알 수 있었으며, 이러한 본 연구 결과를 토대로 기계 혹은 기계 구조물 내부에 구멍을 뚫는다면, 시험편에 발생하는 파괴 응력의 값을 줄임으로써 파손이나 고장이 일어나는 것을 방지할 수 있을 것으로 사료된다.

• 콘크리트학회지
• /
• 제10권6호
• /
• pp.203-211
• /
• 1998

고체내부의 미소파괴시 발생하는 탄성파 방출을 이용하는 음향방출기법은 구조물 또는 재료 내부의 미시적 변형기구를 이해하는데 매우 유익한 수단으로 최근 각 분야에서 다양하게 응용되고 있다. 따라서 본 연구에서는 모르타르 부재의 휨재하 시험시 부재 내부에 발생하는 미시적 손상거동 및 파괴특성을 시험시 연속적으로 모니터링한 AE 신호특성으로부터 평가하였다. 나아가 삼각법을 이용한 2차원 AE 발생원 위치추정으로부터 시험체 노치선단 주변에 대한 AE 발생원 위치를 명확히 하였으며 이들 결과로부터 미소균열의 성장 거동을 연속적으로 모니터링 하였다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집A
• /
• pp.26-36
• /
• 2001

Smart sensors and actuators have recently been developed. In this study, first, small-diameter fiber Bragg grating (FBG) sensors developed by the author, whose cladding and polyimide coating diameters were 40 and $52{\mu}m$, respectively, were embedded inside a laminate without resin-rich regions around sensors and the deterioration of mechanical properties of the composite laminate. The small-diameter FBG sensor was embedded in $0^{\circ}$ ply of a CFRP laminate for the detection of transverse cracks in $90^{\circ}$ ply of the laminate. The reflection spectra from the FBG sensor were measured at various tensile stresses. The spectrum became broad and had some peaks with an increase of the transverse crack density. Furthermore, the theoretical calculation reproduced the change in the spectrum very well. These results show that the small-diameter FBG sensors have a potential to detect the occurrence of transverse cracks through the change in the form of the spectrum, and to evaluate the transverse crack density quantitatively by the spectrum width. On the other hand, shape memory alloy (SMA) films were used to suppress the initiation and growth of transverse cracks in CFRP laminates. Pre-strained SMA films were embedded between laminas in CFRP laminates and then heated to introduce the recovery stress in SMA films and compressive stresses in the weakest plies ($90^{\circ}$ ply). The effects of recovery stresses are demonstrated in the experiments and well predicted using the shear-lag analysis and the nonlinear constitutive equation of SMA films.

• 한국전산구조공학회논문집
• /
• 제25권4호
• /
• pp.279-285
• /
• 2012

본 논문에서는 섬유강화 복합재에 대해 균질화법과 접목된 페리다이나믹 전산해석 방법론을 제시하였다. 복합재료에 대해 제시된 해석모델로 동적 취성 파괴 및 손상해석을 수행하였다. Coker 등(2001)에서 제시된 비대칭 하중 하의 섬유강화 복합재의 동적 파괴 실험결과와 비교하여 페리다이나믹 비국부 해석모델이 다양한 동적 파괴특성 및 극초음속으로 균열이 진전되는 것을 잘 모사할 수 있음을 검증하였다. 또한 대칭 하중조건에 대한 해석결과와 비교하여 비대칭 하중이 더 높은 균열전파 속도를 유발하는 것을 확인하였다. 수치해석 결과들이 실험 결과들에 부합함을 또한 확인하였다.