Yousung Jung;Hye-Jin Kim;Dongwook Kim;Bumjin Joo;Jin-Woo Jhoo;Aera Jang
한국축산식품학회지
/
제43권5호
/
pp.767-791
/
2023
To evaluate the effect of different cooking methods on the physicochemical quality and volatile organic compounds (VOC) of dairy beef round, twelve beef round pieces were divided into four groups: raw, boiling, microwave, and sous-vide. The sous-vide group had a higher pH than the boiling or microwave groups. The boiling group exhibited the highest shear force and CIE L*, followed by the microwave and sous-vide groups (p<0.05). The sous-vide group received higher taste and tenderness scores from panelists (p<0.05) and showed significantly higher levels of aspartic and glutamic acids than the other groups. The sous-vide and microwave groups had the highest oleic acid and polyunsaturated fatty acid levels, respectively. The sous-vide group had significantly higher hypoxanthine and inosine levels than the other groups. However, the microwave group had higher inosine monophosphate levels than the other groups. The sous-vide group had a higher alcohol content, including 1-octen-3-ol, than the other groups. Octanal and nonanal were the most abundant aldehydes in all groups. (R)-(-)-14-methyl-8-hexadecyn-1-ol, p-cresol, and 1-tridecyne were used to distinguish the VOC for each group in the multivariate analysis. Sous-vide could be effective in increasing meat tenderness as well as taste-related free amino acid (aspartic acid and glutamic acid) and fatty acid (oleic acid) levels. Furthermore, specific VOC, including 1-octen-3-ol, 2-ethylhexanal ethylene glycol acetal, and 2-octen-1-ol, (E)-, could be potential markers for distinguishing sous-vide from other cooking methods. Further studies are required to understand the mechanisms underlying the predominant association of these VOC with the sous-vide cooking method.
A Model of small scale total mixed rations(TMR) plant which can be utilized round bales was developed, tested and analyzed in this study. This study consist of two parts. One is development of a small scale TMR plant model which was already reported at the previous paper. This is the second part of the study. For the study, a series of tests of the model plant were performed and its costs was analyzed. Also, the break-even point of the model plant by comparing with market price of commercial TMR feed was determined. Results of the research are summarized as follows ; As the results of mixing test, the average coefficient of variation(CV) value for mixing of the feed was 13.0 % at the gate of the mixer. The production cost was estimated as 8,298 won/head for dairy cattle farm and 2,495 won/head for beef cattle farm, when producing 8 batch a day. Also, it is recommended to utilize the model plant when farm size is over 79 heads for dairy cattle farm and 113 heads for beef cattle farm. As an overall conclusion, the model plant designed for farm size TMR feed mill will be very useful model for both beef cattle and dairy farms in Korea. Also it is expected that the capital investment for the model plant can be recovered with 8 months compare with purchasing commercial TMR feed if the model plant feeds 1,000 beef cattle approximately.
Currently TMR feed produced in commercial plant is one of the major source to feed cattle for both beef and dairy farm. However, because of lack of cutting and mixing system for utilizing domestic produced firmly baled round roughage in commercial TMR plant, these commercial TMR feed can not satisfy to farmers both in quality and price points of view. In order to solve these problems, a farm group size TMR plant model was developed in this study. The model plant was consist of round bale receiving and cutting system, pneumatic conveying system for transfer the roughage which was cut at the cutter to TMR mixer through pneumatic conveyor, TMR mixer enable to soften the stiff rice strew and to mix with other ingredients, finished feed bin which can be transfer to either packing system or individual farm, packing system by tycon bag which contains 400 kg unit and bulk unloading system to individual farmer. Also, a simulation model ARENA was applied to the model system in order to evaluate and check the production rate in each unit process and operation rate of total system and to find out if there are any clogged unit system obstructing the smooth flow of the total process flow. Processing cycle for produce one batch of the model plant was less than 30 minutes. Thus, it will take less than four hours for producing 16 tons per day equivalent to 1,000 beef cattle's daily feed.
Choi, Yun-Sang;Jo, Kyung;Lee, Seonmin;Yong, Hae In;Jung, Samooel
Journal of Animal Science and Technology
/
제62권3호
/
pp.396-408
/
2020
This study investigated the quality properties of enhanced beef, manufactured by injecting the beef with a brine containing winter mushroom juice powder (WMJP). The enhanced beef was manufactured by injecting the eye of round with brine (15% by green weight). Four treatments consisted of control (no injection of brine) and three enhanced beef, EBS (brine containing 5 g sodium chloride per kg beef), EBW 0.2 (brine containing 5 g sodium chloride and 2 g WMJP per kg beef), and EBW 0.5 (brine containing 5 g sodium chloride and 5 g WMJP per kg beef), were tested. The effect of enhancement or WMJP on the quality properties of beef was evaluated during storage at 4℃ for 1, 5, and 10 days. Total aerobic bacteria counts between the control and the enhanced beef, and among EBS, EBW 0.2, and EBW 0.5 were not significantly different after any storage period (p > 0.05). The pH of beef was not different between the control and the enhanced beef, and among enhanced beef at 1 and 5 days of storage (p > 0.05). However, it was higher in the enhanced beef than control, and EBW 0.2 and EBW 0.5 had higher pH than EBS after 10 days of storage (p < 0.05). The enhanced beef showed a high total loss at all storage days (p < 0.05). There were no differences in total loss among enhanced beef after any storage period (p > 0.05). The enhanced beef had no consistent differences in L*, a*, and b* values with control during storage, however, EBW 0.5 showed high color stability. The hardness of the enhanced beef was significantly lower than that of the control after 10 days of storage, although the values were lower at all storage stages. EBS 0.5 had the lowest thiobarbituric acid reactive substance (TBARS) value among cooked beef of all treatments at all storage days. The enhanced beef received higher scores in all sensory properties than control, and no negative effect of WMJP was found in the sensory quality of the enhanced beef. The use of winter mushroom juice can result in quality improvement in enhanced beef.
Not many types of roughage cutters have been introduced in Korea so far. However, those machines could not satisfy farmers to cut rice straw or barley wrap-silage properly. Stiffness and firmness of roughage bale were two obstructing factors. In order to solve this problem, a tractor attached cut-feeding machinery for the round baled roughage was developed for dairy and beef cattle farm in Korea. A series of tests were performed and acquired data were analyzed by using the several imported roughage cutters, which have been already introduced in dairy farm in Korea. And, a prototype of forage cutter was selected, analyzed, designed and manufactured to develop a tractor attached roughage cut-feeder for round bale. Also, the prototype machine was tested, modified and improved through revising model. As a result, a tractor attached roughage cut-feeder for round bale was manufactured. In order to evaluate the performance of the model machinery. a series of test were performed by the prototype machinery both at the plant and field. The model machinery developed satisfied in both power requirement and cutting capacity. As a conclusion, one of the obstacles against feeding the round baled roughage in the korea cattle farm can be eliminated by developing the tractor attached round baled roughage cut-feeder.
This study compared the growth performance and carcass evaluation of Jeju native cattle (JNC) and its crossbreds (CBK = 25 JNC:50 Charolais:25 Brahman and BCBK = 62.5 JNC:25 Charolais:12.5 Brahman). Eight male calves of each JNC, CBK and BCBK were weaned at 4 month of age and were fed for 24 months of age. All animals grazed a pasture between 5 to 10 months of age then they were fed growing ration at the rate of 1.5% of their BW along with ad libitum supply of Italian ryegrass hay between 11 to 16 months of age and thereafter switched to ad libitum feeding of finishing ration and hay between 17 to 24 months of age. Mean body weight (BW) and BW gain were higher in CBK compared with BCBK and JNC at 4, 10, 16 and 24 months of age. Average daily BW gain during 4 to 10 months of age was the highest for CBK followed by BCBK and JNC. However, daily BW gain was higher in BCBK than in CBK and JNC during 11 and 16 months of age. During fattening period (17 to 24 months) average daily BW gain was higher in JNC than in CBK and BCBK. Slaughter weight, hot and cold carcass weight were higher in CBK compared with JNC and BCBK. Weight of bones, boneless meat, ribs, excluded rib meat, retailed cut meat, tender loin, sir loin, strip loin, sticking, top round, bottom round, fore leg, shank, and thin-flank were higher in CBK than in BCBK and JNC. Fat weight in these carcass cuts and kidney fat was similar in JNC and its crossbreds. Logissimus dorsi and its ratio were higher in CBK compared with BCBK and JNC. Percent moisture, crude protein, and ash contents of beef were similar in JNC and its crossbreds. Percent beef fat was higher in JNC and BCBK than in CBK. Cooking loss and water holding capacity of beef was similar in JNC and its crossbreds. Sheer force was lower in BCBK compared with JNC and CBK. Juiciness, tenderness and flavor of beef were higher in BCBK compared with JNC and CBK. In conclusion, CBK has shown higher growth rate and produced heavier carcasses with good degree of fatness compared with JNC and BCBK. However, fattening for longer period could increase the maintenance cost in CBK and BCBK because of their higher BW which they attained during growing period.
This study was performed to investigate the physicochemical properties of striploin (m. longissimus dorsi), chuck tender (m. supraspinatus) and eye of round (m. semitendinosus) of Holstein steer beef produced from different fattening groups (18, 21, 24 mon-old). The intramuscular fat contents were significantly higher in striploin (9.14%) and eye of round (4.31%) from 24 mon-old groups when compared to the same cuts (6.53% and 2.63%) from 18 mon-old groups, respectively. Three muscles from 18 mon-old group had significantly higher moisture contents (%) than those from the other groups (p<0.05). The protein contents were significantly higher in chuck tender (19.39%) and eye of round (21.09%) from 24 mon-old group than 18- and 21 mon-old groups (p<0.05). There were not significantly different in collagen contents among three fattening groups. In meat color, striploin, chuck tender and eye of round from 21 mon-old group had significantly higher CIE $L^*$ (41.77), $a^*$ (20.98) and $b^*$ (10.87) values than those from the other groups (p<0.05). Warner-Bratzler shear force values (WBS) for three muscles were significantly lower in 24 mon-old group than the other groups (p<0.05). The oleic acids (C18:1n9) contents of three muscles from 24 mon-old group were highest (p<0.05) among three groups. Total contents of MUFA were significantly higher and total contents of PUFA including arachidonic acids (C20:4n6) were significantly lower in chuck tender and eye of round muscles from 24 mon-old group (p<0.05).
In order to cut the round bale easily, a roughage cut-feeder for the round bale was developed in this study. This study consists of two parts. One is development of a cutting mechanism and a performance test reported in the previous paper. This is the second part of the study. For the study, recent trend of traditional cutting system was analyzed. Also, cost of the prototype cut-feeder was analyzed and determine the break-even point of farm size was determined by comparing with traditional method using a traditional cutter. A prototype cut-feeder was investigated with the fact that working performance, fiber length and shape of roughage and feeding quality was good. Operating cost of the prototype cut-feeder decreased rapidly with an increase of farm size. Break-even point in terms of farm size was 36 heads for beef and 28 heads for dairy. Also, costs estimated were 118,000 won/head year and 148,000 won/head year, respectively.
Cho, Soohyun;Kang, Sun Moon;Seong, Pilnam;Kang, Geunho;Kim, Youngchoon;Kim, Jinhyung;Chang, Sunsik;Park, Beomyoung
한국축산식품학회지
/
제37권3호
/
pp.440-448
/
2017
This study was conducted to establish the shelf life of $1^{++}$ grade Hanwoo beef by evaluating the changes in meat quality and storage stability under distribution conditions similar to those during export to Hong Kong and China. Four muscles of the loin, striploin, tenderloin, and top round muscles were obtained from 10 animals of $1^{++}$ grade Hanwoo steers. The distribution conditions were 0, 7, or 14 d of aging at $2^{\circ}C$ and continuous storage at $-18^{\circ}C$ for 0, 3, 6, or 9 mon. The lightness (CIE $L^*$) values decreased as the duration of freezer storage increased (p<0.05). The water-holding capacity of 4 muscles increased as the aging time increased when they were frozen for 3 mon (p<0.05). The cooking loss values of the four muscles were significantly increased as the duration of freezer storage increased (p<0.05). The Warner-Bratzler shear force values were significantly decreased in the loin, striploin, and top round muscles as the aging time increased (p<0.05). The changes in volatile basic nitrogen (16.67-18.49 mg%) and thiobarbituric reactive substance values (0.75-0.82 mg MA/kg meat) were significantly increased when the meat was frozen for 9 mon after 14 d of aging. On the basis of these observations, the shelf life of $1^{++}$ grade Hanwoo beef during distribution should be limited to less than 9 mon of freezer storage at $-18^{\circ}C$ after 14 d of aging at $2^{\circ}C$.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.