• Title/Summary/Keyword: dBc

Search Result 847, Processing Time 0.024 seconds

Better Understanding of Direct Bone-Conduction Measurement: Comparison with Frequency-Specific Bone-Conduction Tones and Brainstem Responses

  • Kim, Yeoju;Han, Woojae;Park, Sihun;You, Sunghwa;Kwak, Chanbeom;Seo, Youngjoon;Lee, Jihyeon
    • Korean Journal of Audiology
    • /
    • v.24 no.2
    • /
    • pp.85-90
    • /
    • 2020
  • Background and Objectives: The present study aimed to compare thresholds of direct bone-conduction (BC direct) with those of behaviorally measured BC pure-tone audiometry (PTA) and objectively measured BC auditory brainstem response (ABR) to confirm the clinical feasibility of their relationships. Subjects and Methods: Young adults with normal hearing participated in the study to determine the thresholds from three measurements at four testing frequencies. In the BC direct, the vibrator of a bone-anchored hearing aid softband was placed on the right mastoid of each subject. In both PTA and ABR, a B71 bone oscillator was placed on the subject's right mastoid. While the subject's thresholds of BC direct and BC PTA were determined with a clinically routine 5-dB step procedure, BC ABR was conducted to determine the individual's hearing sensitivity by a peak V of the waveform using tone-burst and click stimuli. Results: The BC direct showed a different pattern between low and high frequencies. Precisely, its thresholds were 13.25 and 12.25 dB HL at 0.5 and 1 kHz, respectively, but 19 and 19.75 dB HL at 2 and 4 kHz, respectively. A significant positive correlation existed between BC direct and PTA at 1 kHz, which was also correlated with ABR. Conclusions: Based on the current data, the thresholds of BC direct were similar to BC PTA at low frequencies and BC ABR at high frequencies. The thresholds of BC direct might be predictable at approximately 5 dB higher (or lower) than that in PTA, although a large data set is required for standardization.

A Study on the Ubiquitous Service Architecture based on USN-BcN Interworking (USN-BcN 연동에 기반한 유비쿼터스 서비스 제공구조에 관한 연구)

  • Ko, Ko Young-Geun;Cha, Maeng-Q;Yang, Eun-Ho;Kim, Yoon-Kee
    • 한국IT서비스학회:학술대회논문집
    • /
    • 2009.05a
    • /
    • pp.487-490
    • /
    • 2009
  • USN과 BcN은 모두 별개의 기능적 특성을 갖는 네트워크들을 지칭하고 있지만, 그 네트워크를 이용한 서비스를 실현하기 위한 상위 기능요소 및 각 요소간의 관계를 포괄하기도 한다. 그럼에도, USN 영역에서는 BcN을 높은 성능의 장거리 전달 망으로 보는 시각이 지배적이며, BcN 영역에서는 여러 종류의 가입자망 중 하나로 USN을 인식하고 있어, 둘 간의 체계적 연동을 어렵게 하고 있다. 본 논문에서는 두 서비스 제공구조의 분석을 통하여 일반화를 수행하고, 정의된 모델에 필요 기능을 할당한 후 각 기능간의 연동방식에 관하여 논함으로써, USN과 BcN 두 영역의 컨버전스를 실현할 수 있는 서비스 구조를 제안한다.

  • PDF

Hanseniaspora thailandica BC9 β-Glucosidase for the Production of β-ᴅ-Hexyl Glucoside

  • Phongprathet, Sujittra;Vichitphan, Kanit;Han, Jaehong;Vichitphan, Sukanda;Sawaengkaew, Jutaporn
    • Journal of Microbiology and Biotechnology
    • /
    • v.28 no.4
    • /
    • pp.579-587
    • /
    • 2018
  • For biotechnological production of high-valued ${\beta}-{\text\tiny{D}}$-hexyl glucoside, the catalytic properties of Hanseniaspora thailandica BC9 ${\beta}$-glucosidase purified from the periplasmic fraction were studied, and the transglycosylation activity for the production of ${\beta}-{\text\tiny{D}}$-hexyl glucoside was optimized. The constitutive BC9 ${\beta}$-glucosidase exhibited maximum specific activity at pH 6.0 and $40^{\circ}C$, and the activity of BC9 ${\beta}$-glucosidase was not significantly inhibited by various metal ions. BC9 ${\beta}$-glucosidase did not show a significant activity of cellobiose hydrolysis, but the activity was rather enhanced in the presence of sucrose and medium-chain alcohols. BC9 ${\beta}$-glucosidase exhibited enhanced production of ${\beta}-{\text\tiny{D}}$-hexyl glucoside in the presence of DMSO, and 62% of ${\beta}-{\text\tiny{D}}$-hexyl glucoside conversion was recorded in 4 h in the presence of 5% 1-hexanol and 15% DMSO.

Design and Fabrication of the Push-push Dielectric Resonator Oscillator using a LTCC (LTCC를 이용한 push-push 유전체 공진 발진기의 설계 및 제작)

  • Ryu, Keun-Kwan;Oh, Eel-Deok;Kim, Sung-Chan
    • Journal of the Korea Institute of Information and Communication Engineering
    • /
    • v.14 no.3
    • /
    • pp.541-546
    • /
    • 2010
  • The push-push DRO(dielectric resonator oscillator) using a multi-layer structure of LTCC(low temperature co-fired ceramic) fabrication is designed. After the single DRO of series feedback type in the center frequency of 8GHz is designed, the push-push DRO in the center frequency of 16GHz including the Wilkinson power combiner is designed. The bias circuit affecting the size of oscillator are embedded in the intermediate layer of the LTCC multi-layer substrate. As a result, the large reduction in the size of VCO is obtained compared to the general oscillator on the single layer substrate. Experimental results show that the fundamental and third harmonics suppression are above 15dBc and 25dBc, respectively, and phase noise characteristics of the push-push DRO presents performance of -102dBc/Hz@100KHz and -128dBc/Hz@1MHz offset frequencies from carrier.

Parallel Feedback Oscillator for Strong Harmonics Suppression and Frequency Doubler (고조파 억압을 위한 병렬 궤환형 발진기와 주파수 체배기)

  • Lee, Kun-Joon;Ko, Jung-Pil;Kim, Young-Sik
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.30 no.2A
    • /
    • pp.122-128
    • /
    • 2005
  • In this paper, a low noise parallel feedback oscillator for harmonic suppression and a frequency doubler are designed and implemented. As the fundamental signal of the oscillator for frequency doubling is extracted between the dielectric resonator (DR) filter and the gate device of the active device, the undesired harmonics at the output of the oscillator is remarkably suppressed. The fundamental signal of the oscillator for frequency doubling directly feeds to the frequency doubler without an additional band pass filter for harmonic suppression. The second harmonic suppression of -47.7 dBc at the oscillator output is achieved, while the fundamental suppression of -37.5 dBc at the doubler output is obtained. The phase noise characteristics are -80.3 dBc/Hz and -93.5 dBc/Hz at the offset frequency of 10 KHz and 100 KHz from the carrier, respectively.

A Power Amplifier for Portable Base Stations Operating in TVWS (TVWS를 이용하는 이동기지국용 전력증폭기)

  • Kang, Sanggee
    • Journal of Satellite, Information and Communications
    • /
    • v.12 no.4
    • /
    • pp.110-114
    • /
    • 2017
  • Using a small mobile wireless network as a supplement to the disaster safety network can be useful for eliminating small radio shadowing areas, reducing traffic overloads in disaster areas, and quickly building a disaster communication network in difficult access areas. Potable base station is needed to build a small mobile wireless network, and the portable base station using TVWS(TV White Space) is effective in terms of utilization of radio frequency resources and construction cost of wireless networks. In this paper, we design and implement a power amplifier for portable base station operating in TVWS. The implemented power amplifier operates at 470 ~ 698MHz. The gain of the implemented amplifier is more than 20.1dB, the input/output return loss is more than 11.4dB, and the isolation is more than 39.9dB when the output is off. The IMD characteristic of the power amplifier has characteristics of 61.0dBc with 18.8dBm output at 470MHz, 59.3dBc wih 18.6dBm output at 550MHz and 56.5dBc with 19.0dBm output at 690MHz. The power amplifier implemented in this paper can be used as a power amplifier for portable base station.

A Study on the New BC-ABBM Motion Estimation Algorithm for Low Bit Rate Video Coding (저 전송률 비디오 압축을 위한 새로운 BC-ABBM 움직임 추정 알고리즘에 관한 연구)

  • 이완범;김환용
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.29 no.7C
    • /
    • pp.946-953
    • /
    • 2004
  • Fast search and conventional boolean matching motion estimation algorithms reduce computational complexity and data processing time but this algorithms have disadvantages that is difficult of implementation of hardware because of high control overhead and that is less performance than Full search Algorithm(FA). This paper present new all binary block matching algorithm, called Bit Converted All Binary Block Matching(BC-ABBM). Proposed algorithm have performance closed to the FA by boolean only block matching that may be very efficiently implemented in hardware for low bit rate video communication. Simulation results show that the PSNR of the proposed algorithm is about 0.04dB loss than FA but is about 0.6 ∼ 1.4dB gain than fast search algorithm and conventional boolean matching algorithm.

The K-band Oscillator using Split Ring Resonator (Split Ring 공진기를 이용한 K-Band Oscillator)

  • Han-Kee Joo
    • The Journal of Korean Institute of Electromagnetic Engineering and Science
    • /
    • v.8 no.2
    • /
    • pp.107-115
    • /
    • 1997
  • In this paper, a 23 GHz push-push oscillator was designed and fabricated for 23 GHz point-to-point communication using split ring resonator. The split ring resonator was equivalent circuit and numerical method of MPIE(Mixed Potential Integral Equation). The analysis of split ring resonator which coupled between microstrip lines was carried out with transmission-mode using this results. The fabricated oscillator showed the output power of 4 dBm, the 1'st harmonic suppression of -20 dBc, the 3rd harmonic suppression of -34 dBc, a SSB phase noise of -109 dBc / Hz at 1MHz offset frequency from the carrier was achieved and 1.4 percents efficiency at 23 GHz. The experimental outputs were in good results with the theoretical and simulated results.

  • PDF

The Design Fabrication PLVCO Using Chip Element (Chip소자를 이용한 PLVCO의 설계 및 제작)

  • 하성재;이용덕;이근태;안창돈;홍의석
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.26 no.12C
    • /
    • pp.268-272
    • /
    • 2001
  • In this thesis, PLVCO(Phase Locked Voltage Controlled Oscillator) using 24.42 GHz voltage controlled hair-pin resonator oscillator, Sequency divider, buffer amplifier, -10 dB directional coupler and phase detector is designed and fabricated for B-WLL. The PLVCO shows the oscillator output power of 16.5 dBm at 24.42 GHz, and phase noise of -76.3 dBc/Hz at 1001:Hz offset, -72.8dBc/Hz at 10 kHz offset from fundamental frequency.

  • PDF

Next-Generation Converged Networking in Korea: The Concept and Its R&D Activities

  • Kang, Kug-Chang;Park, No-Ik;Lee, Soon-Seok;Kim, Young-Sun;Jun, Kyung-Pyo
    • Journal of Communications and Networks
    • /
    • v.8 no.4
    • /
    • pp.475-479
    • /
    • 2006
  • In Korea, we witness vivid evidences of changing trend in communication that insist the emergence of new networking architecture. To accommodate the changing trend and to hold current strong position in global IT industry, Korea have launched broadband convergence network (BcN) initiative. BcN vision for Korea is to be the first in the world to realize converged network infrastructure and ubiquitous service environment. In this paper, we have introduced the concept and the vision of BcN with a viewpoint of a new paradigm to prepare future-proof communication environment. And then, we have disclosed BcN research and development (R&D) activities including R&D philosophy, R&D phases, and key technologies required. Also, we have discussed current development issues in three technology branches including service and control technology, unified transport technology, and next-generation access technology.