• 전기의세계
• /
• 제25권1호
• /
• pp.101-103
• /
• 1976

Recently there exist many reports about the results of the theoretical analysis on the influence of screw symmetry structure to the characteristics of EMW propagation in the cylindrical wave-guides loaded with ferrite and, in this paper, an attempt is mode to analyze applying symmetry analysis the wave propagation characteristics in the dual turnstile structure. And one of the results obtained is the values of wave vectors become, in general, different according to the orientation of the geometry in the case of the dual turnstile structure.

• Structural Engineering and Mechanics
• /
• 제11권2호
• /
• pp.199-210
• /
• 2001

Axially compressed circular cylinders repeat symmetry-breaking bifurcation in the postbuckling region. There exist stable equilibria with all symmetry broken in the buckled configuration, and the minimum postbuckling strength is attained at the deep bottom of closely spaced equilibrium branches. The load level corresponding to such postbuckling stable solutions is usually much lower than the initial buckling load and may serve as a strength limit in shell stability design. The primary concern in the present paper is to compute these possible postbuckling stable solutions at the deep bottom of the postbuckling region. Two computational approaches are used for this purpose. One is the application of individual procedures in computational bifurcation theory. Path-tracing, pinpointing bifurcation points and (local) branch-switching are all applied to follow carefully the postbuckling branches with the decreasing load in order to attain the target at the bottom of the postbuckling region. The buckled shell configuration loses its symmetry stepwise after each (local) branch-switching procedure. The other is to introduce the idea of path jumping (namely, generalized global branch-switching) with static imperfection. The static response of the cylinder under two-parameter loading is computed to enable a direct access to postbuckling equilibria from the prebuckling state. In the numerical example of an elastic perfect circular cylinder, stable postbuckling solutions are computed in these two approaches. It is demonstrated that a direct path jump from the undeformed state to postbuckling stable equilibria is possible for an appropriate choice of static perturbations.

• Geomechanics and Engineering
• /
• 제3권1호
• /
• pp.17-28
• /
• 2011

This paper presents an analytical solution for steady state flow into a close-ended cylindrical permeameter. The soil medium is considered to be uniform, isotropic, and of infinite thickness. Laplace equation is solved by considering rotational symmetry and by using curvilinear coordinates obtained from conformal mapping. The deduced shape factors, which are compared to approximate relationships obtained from both numerical and physical modelling, and idealizations involving ellipsoidal cavities, are proposed for use in field measurements. It is shown that some of the shape factors obtained are significantly different from published values and show a much higher dependence of the rate of flow on the aspect ratio, than deduced from approximate solutions.

• Geomechanics and Engineering
• /
• 제4권1호
• /
• pp.19-37
• /
• 2012

This paper presents the results of analytical and numerical analyses of the effects of performing a pressuremeter test or driving a pile in clay. The geometry of the problem has been simplified by the assumptions of plane strain and axial symmetry. Pressuremeter testing or installation of driven piles has been modelled as an undrained expansion of a cylindrical cavity. Stresses, pore water pressures, and deformations are found by assuming that the clay behaves like normally consolidated modified Cam clay. Closed-form solutions are obtained which allow the determination of the principal effective stresses and the strains around the cavity. The analysis which indicates that the intermediate principal stress at critical state is not equal to the mean of the other two principal stresses, except when the clay is initially isotropically consolidated, also permits finding the limit expansion and excess pore water pressures by means of the Almansi finite strain approach. Results are compared with published data which were determined using finite element and finite difference methods.

• International journal of advanced smart convergence
• /
• 제4권1호
• /
• pp.120-126
• /
• 2015

This research is a comparison of the characteristics of the displacement isolines due to powder-die-wall friction that arise during the compaction of ceramic powders in conventional die. It has been done using the CosmosWorks software package of the SolidWorks simulation software. The results of comparative simulation with FEM showed that the comparison of the displacement isolines and distribution of deformation of the ceramic powders. In the case of conventional uniaxial dry compaction for long length cylindrical green compact, considerable bending of the layers in the form of a cone can be observed. It is symmetry along centerline of cylindrical green compact. The distributions of the deformation of the green compacts (diameter 14 mm, height 20 mm) as a result of conventional compaction under ultrasonic vibration with power 1 and 2 kW are reduced to 4% and 6.5% when compared with conventional compaction without ultrasonic vibration respectively. Thus, density distribution can be minimized by increasing the power of ultrasonic vibration.

• 천문학회보
• /
• 제36권1호
• /
• pp.82.1-82.1
• /
• 2011

We present a new code for solving non-LTE radiative transfer problems in a general grid (RIG). RIG develops from RATRAN code (Hogerheijde & van der Tak 2000) using the Accelerated Monte-Carlo method, and it can cope with line overlap effect among multiple molecular and atomic species. In this algorithm we make grids in arbitrary coordinates adequate to the problem, but, on the other hand, photons propagate in the Cartesian coordinates. For spherical, cylindrical and other well defined coordinate, the problem of tracing photon's path reduces to solving simple quadratic equations. For example, the outflow in the star formation have high dynamic range in scales from a few AU to ~ 0.1 pc and have also cylindrical symmetry. So, we have used (r, ${\alpha}$) coordinate system, where r is the distance from the origin and ${\alpha}$ is z/ R2 in the cylindrical coordinate of (R,z). The (r, ${\alpha}$) coordinate realizes the density - power function of r - and temperature distributions of the problems with smaller numbers of grid than the cylindrical coordinate does, and the former consumes less time to solve the problems than the latter.

• 한국기계연구소 소보
• /
• 통권14호
• /
• pp.33-43
• /
• 1985

Thick cylindrical structures, such as assemblies with electrical induction heaters or nuclear fuel element, are sometimes subjected to thermal stresses from internal heating. Such stresses are produced by temperature gradients between the inside and outside surfaces. These problems possess symmetry about either a point or an axis. the objective of this paper is to present the determination of the temperature distribution and thermal stress-strain within a conducting body by finite element method.

• 지구물리와물리탐사
• /
• 제7권1호
• /
• pp.51-55
• /
• 2004

This paper presents a fast and stable imaging scheme using the localized nonlinear (LN) approximation of integral equation (IE) solutions for inverting electromagnetic data obtained in a crosswell survey. The medium is assumed to be cylindrically symmetric about a source borehole, and to maintain the symmetry a vertical magnetic dipole is used as a source. To find an optimum balance between data fitting and smoothness constraint, we introduce an automatic selection scheme for a Lagrange multiplier, which is sought at each iteration with a least misfit criterion. In this selection scheme, the IE algorithm is quite attractive for saving computing time because Green's functions, whose calculation is a most time-consuming part in IE methods, are repeatedly re-usable throughout the inversion process. The inversion scheme using the LN approximation has been tested to show its stability and efficiency, using both synthetic and field data. The inverted image derived from the field data, collected in a pilot experiment of water-flood monitoring in an oil field, is successfully compared with that derived by a 2.5-dimensional inversion scheme.

• 지구물리와물리탐사
• /
• 제5권4호
• /
• pp.316-322
• /
• 2002

단일 시추공 환경에서 얻어지는 전자기장을 해석하기 위해 확장 Born 혹은 국소비선형 근사를 이용한 계산시간이 짧고 효율적인 역산법을 만들었다. 매질은 시추공에 관해 축대칭이라 가정하였으며 그 대칭성을 유지하기 위해 수직 자기 쌍극자원을 사용하였다. 역산법의 효율성과 안정성은 적절한 라그랑지계수의 사용에 크게 의존하지만 이는 일반적으로 원하는 수렴성을 달성하기 위해 수작업으로 결정된다. 본 연구에서는 현장 자료를 다루는 역산법의 효율을 향상하기 위해 라그랑지계수의 자동결정법을 개발하였다. 그 역산법의 안정성과 효율성은 이론모델링 자료를 사용하여 검토되었다.

• 지구물리와물리탐사
• /
• 제23권2호
• /
• pp.67-71
• /
• 2020

이 논문에서는 축 방향 대칭성을 가지는 원통형 이상체에 대한 자력 변화율 텐서의 해석해를 유도하였다. 일정한 방향으로 자화된 원통형 이상체에 대한 3성분 벡터 자력 반응식을 기존 연구에서 이미 유도하였으므로, 이를 직교좌표계에서 각 축 방향으로 미분하여 자력 변화율 텐서 반응식을 유도하였다. 원통형 이상체가 가지는 축 방향 대칭성 때문에 벡터 자력 반응식은 원통 좌표계의 변수를 포함한 식으로 표현되어 있으므로 직교 좌표계와 원통 좌표계 사이의 변수 미분 관계를 적용하여 자력 변화율 텐서를 유도하였다.