• 한국식품과학회지
• /
• 제11권1호
• /
• pp.8-12
• /
• 1979

알루미늄-아크릴 필림을 사용(使用)한 곡면식(曲面式) 태양열이용장치(太陽熱利用裝置)의 제작(製作)과 이의 한국적(韓國的) 기후조건하(氣候條件下)에서 효능(效能)을 시험(試驗)한 결과(結果) 다음과 같은 결과를 얻었다. 1. 반사집광판(反射集光板)으로 사용(使用)한 알루미늄-아크릴 필림의 반사율(反射率)은 66.1%이었으며 저렴(低廉)한 가격(價格)에 비(比)하여 볼 때 반사판(反射板)으로서 충분(充分)히 이용(利用)할 수 있었다. 2. 흡광부위(吸光部位) 에서의 열이용효율(熱利用?率)은 73%이었으며 2.82 cm/sec의 자연대류(自然對流)에 의(依)한 유속(流速)을 얻을수 있었다. 3. 태양열이용장치(太陽熱利用裝置)를 물의 가온(加溫)에 사용(使用)할 경우 최고(最高) 28.6%의 열이용효율(熱利用?率)을 얻을 수 있었다. 4. 태양열이용장치(太陽熱利用裝置)에 의해 가온(加溫)된 수온(水溫)의 온도차(溫度差)의 대수치(對數値)와 태양열복사(太陽熱輻射)에너지와의 관계는 선형적비례(線型的比例)관계가 성립(成立)되었고 열이용효율(熱利用?率)은 복사에너지량이 클수록 선형적 감소관계가 있었다.

• 한국세라믹학회지
• /
• 제43권11호
• /
• pp.715-723
• /
• 2006

Perovskite oxide materials are very important for the electronics industry, because they exhibit promising properties. With an interest in the obvious applications, significant effort has been invested in the growth of highly crystalline epitaxial perovskite oxide thin films in our laboratory. And the desired structure of films was formed to achieve excellent properties. $Y_1Ba_2Cu_3O_{7-x}$ (YBCO) superconducting thin films were simultaneously deposited on both sides of 3 inch wafer by inverted cylindrical sputtering. Values of microwave surface resistance R$_2$ (75 K, 145 GHz, 0 T) smaller than 100 m$\Omega$ were reached over the whole area of YBCO thin films by pre-seeded a self-template layer. For implementation of voltage tunable high-quality varactor, A tri-layer structured SrTiO$_3$ (STO) thin films with different tetragonal distortion degree was prepared in order to simultaneously achieve a large relative capacitance change and a small dielectric loss. Highly a-axis textured $Ba_{0.65}Sr_{0.35}TiO_3$ (BST65/35) thin films was grown on Pt/Ti/SiO$_2$/Si substrate for monolithic bolometers by introducing $Ba_{0.65}Sr_{0.35}RuO_3$ (BSR65/35) thin films as buffer layer. With the buffer layer, the leakage current density of BST65/35 thin films were greatly reduced, and the pyroelectric coefficient of $7.6\times10_{-7}$ C $cm^{-2}$ $K^{-1}$ was achieved at 6 V/$\mu$m bias and room temperature.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2011년도 추계학술대회
• /
• pp.903-906
• /
• 2011

고밀도집적을 위한 구리기둥주석범프(CPTB)의 제작공정에 흔히 전기도금과 무전해도금이 적용된다. CPTB는 약 $100{\mu}m$ 정도의 피치를 갖도록 먼저 구리도금 층을 전착시킨 다음, 구리의 산화 억제를 위하여 구리기둥 주위에 주석을 입혀 제작한다. 이 과정에서 구리도금 층 두께를 균일하게 형성하는 일은 매우 민감하고 어렵지만 중요한 일이다. 이를 위하여 구리도금 전극 사이에 전류분포 제어를 위한 절연 막(절연게이트)을 형성하여 도금 층의 두께분포를 조절하는 실험을 하였다. 원통형 도금 조에서 중심부를 열어 전류를 흘려주고, 그 외 부분은 가장자리 끝까지 막고 전류를 차단하여 두께분포 변화를 확인하였다.

• Applied Microscopy
• /
• 제37권2호
• /
• pp.53-63
• /
• 2007

왕거미과의 산왕거미(Araneus ventricosus)를 실험재료로 하여 독 생성장치의 미세구조를 주사전자현미경으로 관찰하였다. 두흉부에 위치한 거미의 독 생성장치는 위턱(chelicera)과 한 쌍의 독선으로 이루어졌으며, 각각의 위턱은 기저마디와 가동성 엄니(fang)가 관절된 형태를 이루고 있었다. 산왕거미의 위턱은 체축에 대해 직각 방향으로 접히는 새실젖거미아목(Labidognata)의 특성을 지니고 있었으며, 관절을 통해 연결된 두개의 마디는 마치 접이식 재크 나이프와 유사한 구조를 하고 있음이 확인되었다. 원통형의 엄니는 다수의 돌기가 형성된 위턱고랑(cheliceral groove)과 분화된 접번관절로 연결되어 있었다. 또한, 위턱고랑에는 4개의 앞엄니두덩이(promarginal teeth)와 3개의 후엄니두덩이(retromarginal teeth) 등, 총 7개의 큐티클성 엄니두덩이가 두 줄로 융기된 구조를 형성하고 있었다. 엄니의 말단에는 독액을 분비하는 단일분비구멍이 후연돌기와 면한 쪽의 표면을 통해 개구되어 있었으며, 굴곡운동시 엄니와 접하는 위턱고랑의 표면에는 거친 함몰부가 형성되어 있었고 다수의 미세한 분비 구멍들이 확인되었다.

• 조명전기설비학회논문지
• /
• 제16권6호
• /
• pp.130-136
• /
• 2002

본 논문은 비유전율이 100 이상으로 제작된 Ti-Si-Al형 세라믹 촉매 방전관에 전원 전압 4 ～6［kV］, 구동 주파수0.6～1.0［kHz］를 방전관 전극에 인가하여 오존 농도와 수율을 측정한 것이다. 측정 결과 구동 주파수 600［Hz］, 유량 2［1/min］, 동작 압력 1.6［atm］, 방전관 주위 온도 20［$^{\circ}C$］에서 산소 원료의 경우, 오존 발생 농도는 50～60［g/㎥］이었고, 오존 발생 수율은 180(g/kWh)로 나타났다. 그리고 반응기 내부 온도 또는 유입 가스 온도가 낮을수록 오존 수율은 상승하였다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2009년도 제38회 동계학술대회 초록집
• /
• pp.475-475
• /
• 2010

We have generated Ar plasma in dense plasma focus device with coaxial electrodes for extreme ultraviolet (EUV) lithography and investigated an emitted visible light for electro-optical plasma diagnostics. We have applied an input voltage 4.5 kV to the capacitor bank of 1.53 uF and the diode chamber has been filled with Ar gas of pressure 8 mTorr. The inner surface of the cylindrical cathode has been attatched by an acetal insulator. Also, the anode made of tin metal. If we assumed that the focused plasma regions satisfy the local thermodynamic equilibrium (LTE) conditions, the electron temperature and density of the coaxial plasma focus could be obtained by Stark broadening of optical emission spectroscopy (OES). The Lorentzian profile for emission lines of Ar I of 426.629 nm and Ar II of 487.99 nm were measured with a visible monochromator. And the electron density has been estimated by FWHM (Full Width Half Maximum) of its profile. To find the exact value of FWHM, we observed the instrument line broadening of the monochromator with a Hg-Ar reference lamp. The electron temperature has been calculated using the two relative electron density ratios of the Stark profiles. In case of electron density, it has been observed by the Stark broadening method. This experiment result shows the temporal behavior of the electron temperature and density characteristics for the focused plasma. The EUV emission signal whose wavelength is about 6 ~ 16 nm has been detected by using a photo-detector (AXUV-100 Zr/C, IRD). The result compared the electron temperature and density with the temporal EUV signal. The electron density and temperature were observed to be $10^{16}\;cm^{-3}$ and 20 ~ 30 eV, respectively.

• 한국소음진동공학회논문집
• /
• 제24권11호
• /
• pp.907-918
• /
• 2014

In this study for the prediction of 3D underwater radiated noise pattern, a comparison between the proposed method(DHIE, Discrete Helmholtz Integral Equation) and the 3D underwater radiated noise calculation results using the measurement of near-field acoustic pressure data is performed. The near-field acoustic pressure in water is measured for the calculation of the far-field radiated noise pattern and the far-field acoustic power. Also the vibration field of the underwater structure is measured in simultaneously. Using the total far-field acoustic power and the vibration field on the surface of the structure, the proposed method(DHIE) can predict the underwater radiated noise pattern of the far-field The predicted results show the reasonable agreement within about 5dB comparing with the experiment result.

• 생명과학회지
• /
• 제12권1호
• /
• pp.43-48
• /
• 2002

토양으로 부터 혈전용해효소를 생산하는 방선균을 분리하여, 본 방선균이 생산하는 혈전용해효소의 최적 생산 조건을 검토하였다. 생산균주는 회색의 기균사를 생성하며 약 0.6~0.8$\times$0.4~0.8$\mu\textrm{m}$ 크기의 원통형 포자를 가지며 포자의 표면은 매끈하며, 약 10~40개의 포자가 고리를 이루고 있는 형태를 나타내었다. 이상의 결과로 본 균주는 Sfreptomyces 속으로 추정되어 Streptomyces sp. JK-20로 명명하였다. 본 균주의 생리학적 특성으로 20~32$^{\circ}C$의 온도에서 생육 가능하며 최적 생육 온도 및 pH는 24$^{\circ}C$ 및 pH 6이었다. 본 균주의 혈전용해효소의 생산을 위한 최적 생산 조건을 검토한 결과 탄소원으로 1% xylose였고 질소원은 0.5% yeast extract, 0.5% polypeptone, 금속염은 0.1% MgSO$_4$.7$H_2O$였으며 인산염은 0.1% NaH$_2$Po$_4$.2$H_2O$이었다. 본 생산 균주를 최적 배지 조건에서 배양하였을 때 배양 4일째에 혈전용해효소의 생산력이 가장 높았다.

• Geomechanics and Engineering
• /
• 제9권6호
• /
• pp.757-774
• /
• 2015

Reinforcing soils with the geosynthetics have been shown to be an effective method for improving the uplift capacity of granular soils. The pull-out resistance of the reinforcing elements is one of the most notable factors in increasing the uplift capacity. In this paper, a new reinforcing element including the elements (anchors) attached to the ordinary geogrid for increasing the pull-out resistance of the reinforcement, is used. Thus, the reinforcement consists of the geogrid and anchors with the cylindrical plastic elements attached to it, namely grid-anchors. A three-dimensional numerical study, employing the commercial finite difference software FLAC-3D, was performed to investigate the uplift capacity of the pipelines buried in sand reinforced with this system. The models were used to investigate the effect of the pipe diameter, burial depth, soil density, number of the reinforcement layers, width of the reinforcement layer, and the stiffness of geogrid and anchors on the uplift resistance of the sandy soils. The outcomes reveal that, due to a developed longer failure surface, inclusion of grid-anchor system in a soil deposit outstandingly increases the uplift capacity. Compared to the multilayer reinforcement, the single layer reinforcement was more effective in enhancing the uplift capacity. Moreover, the efficiency of the reinforcement layer inclusion for uplift resistance in loose sand is higher than dense sand. Besides, the efficiency of reinforcement layer inclusion for uplift resistance in lower embedment ratios is higher. In addition, by increasing the pipe diameter, the efficiency of the reinforcement layer inclusion will be lower. Results demonstrate that, for the pipes with an outer diameter of 50 mm, the grid-anchor system of reinforcing can increase the uplift capacity 2.18 times greater than that for an ordinary geogrid and 3.20 times greater than that for non-reinforced sand.

• Smart Structures and Systems
• /
• 제22권6호
• /
• pp.675-687
• /
• 2018

In the previous studies on the porous rock strength the effect of pore number and its diameter is not explicitly defined. In this paper crack initiation, propagation and coalescence in Brazilian model disc containing a single cylindrical hole and or multiple holes have been studied numerically using PFC3D. In model with internal hole, the ratio of hole diameter to model diameter was varied between 0.03, 0.17, 0.25, 0.33, and 0.42. In model with multiple hole number of holes was different in various model, i.e., one hole, two holes, three holes, four holes, five holes, six holes, seven holes, eight holes and nine holes. Diameter of these holes was 5 mm, 10 mm and 12 mm. The pre-holed Brazilian discs are numerically tested under Brazilian test. The breakage load in the ring type disc specimens containing an internal hole with varying diameters is measured. The mechanism of cracks propagation in the wall of the ring type specimens is also studied. In the case of multi-hole Brazilian disc, the cracks propagation and b cracks coalescence are also investigated. The results shows that breaking of the pre-holed disc specimens is due to the propagation of radially induced tensile cracks initiated from the surface of the central hole and propagating toward the direction of diametrical loading. In the case of disc specimens with multiple holes, the cracks propagation and cracks coalescence may occur simultaneously in the breaking process of model under diametrical compressive loading. Finally the results shows that the failure stress and crack initiation stress decreases by increasing the hole diameter. Also, the failure stress decreases by increasing the number of hole which mobilized in failure. The results of these simulations were comprised with other experimental and numerical test results. It has been shown that the numerical and experimental results are in good agreement with each other.