• Smart Structures and Systems
• /
• 제22권5호
• /
• pp.527-546
• /
• 2018

This article presents an analysis into the nonlinear forced vibration of a micro cylindrical shell reinforced by carbon nanotubes (CNTs) with considering agglomeration effects. The structure is subjected to magnetic field and transverse harmonic mechanical load. Mindlin theory is employed to model the structure and the strain gradient theory (SGT) is also used to capture the size effect. Mori-Tanaka approach is used to estimate the equivalent material properties of the nanocomposite cylindrical shell and consider the CNTs agglomeration effect. The motion equations are derived using Hamilton's principle and the differential quadrature method (DQM) is employed to solve them for obtaining nonlinear frequency response of the cylindrical shells. The effect of different parameters including magnetic field, CNTs volume percent and agglomeration effect, boundary conditions, size effect and length to thickness ratio on the nonlinear forced vibrational characteristic of the of the system is studied. Numerical results indicate that by enhancing the CNTs volume percent, the amplitude of system decreases while considering the CNTs agglomeration effect has an inverse effect.

• 전기학회논문지
• /
• 제60권1호
• /
• pp.63-70
• /
• 2011

This paper presents the design and operating characteristics of the novel cylindrical linear motor which is designed for the long stroke XY stage. In the long stroke structure, the air gap is changed by the distortion and bending effects, and it makes additional position error in the XY stage. In order to consider the distortion and bending effects of the long stroke, the field part of the cylindrical linear motor is designed as an open structure, and the stroke is supported by the bridge guide which is positioned in the open field part. The mechanical bridge guide can reduce the bending effects of the stroke and can keep a constant air gap. The detailed design process of the proposed cylindrical linear motor is presented in this paper. The proposed motor is analyzed by the 3D FEM technology. The practical XY stage which uses the proposed motor is tested to verify the propose novel cylindrical linear motor. The FEM and experimental results show the effectiveness of the proposed motor.

• Steel and Composite Structures
• /
• 제33권1호
• /
• pp.93-109
• /
• 2019

In the present study, vibration analysis of double bonded micro sandwich cylindrical shells with saturated porous core and carbon/boron nitride nanotubes (CNT/BNNT) reinforced composite face sheets under multi-physical loadings based on Cooper-Naghdi theory is investigated. The material properties of the micro structure are assumed to be temperature dependent, and each of the micro-tubes is placed on the Pasternak elastic foundations, and mechanical, moisture, thermal, electrical, and magnetic forces are effective on the structural behavior. The distributions of porous materials in three distributions such as non-linear non-symmetric, nonlinear-symmetric, and uniform are considered. The relationship including electro-magneto-hydro-thermo-mechanical loadings based on modified couple stress theory is obtained and moreover the governing equations of motion using the energy method and the Hamilton's principle are derived. Also, Navier's type solution is also used to solve the governing equations of motion. The effects of various parameters such as material length scale parameter, temperature change, various distributions of nanotube, volume fraction of nanotubes, porosity and Skempton coefficients, and geometric parameters on the natural frequency of double bonded micro sandwich cylindrical shells are investigated. Increasing the porosity and the Skempton coefficients of the core in micro sandwich cylindrical shell lead to increase the natural frequency of the structure. Cylindrical shells and porous materials in the industry of filters and separators, heat exchangers and coolers are widely used and are generally accepted today.

• 한국전산구조공학회논문집
• /
• 제17권4호
• /
• pp.405-412
• /
• 2004

재료나 핵연료조사시험에서 다공원통형구조물의 모든 구성품에서 감마열 및 fission과 같은 열원이 발생한다. 본 연구는 조사시험중 다공원통형구조물의 열적건전성을 평가하기 위해 온도분포에 대한 일반해를 구하는데 그 목적이 있다. 다공원통형 구조물의 온도해석을 위해 2차원 열전토 방정식을 이용하였다. 유한요소해석은 ANSYS 6.1을 이용하여 수행하였다. 다공원통형 구조물의 온도해석에서 이론해석결과와 유한요소해석결과는 홀의 개수가 3개 이하에서는 온도가 서로 잘 일치하는 것으로 나타났다. 구조물의 홀 개수가 4개일때, 온도분포해석에 대한 두 결과의 차이가 증가하였다.

• 한국해양공학회지
• /
• 제35권3호
• /
• pp.191-202
• /
• 2021

Studies on very large offshore structures are increasing owing to the development of deep sea, large-scale energy generation using ocean resources, and so on. The enlargement of offshore structures makes the hydroelastic effect and low natural frequency related responses important. Numerical analyses and model tests for hydroelastic and higher-order springing responses of fixed cylindrical structures are conducted in this study. The panel methods with and without the hydroelastic effect with shell elements, and the Morison analysis method with beam elements are applied. To observe the hydroelastic effect for structural strength, two structures are considered: bottom-fixed cylindrical structures with high and low bending stiffnesses, respectively. The surge motions at the top of the structure and bending stresses on the structure are observed under regular and irregular wave conditions. The regular wave conditions are generated considering the ratios of the cylindrical outer diameter to the wave lengths, and keeping the wave steepness constant. The model tests are performed in the three-dimensional ocean engineering basin in the KRISO (Korea Research Institute of Ships and Ocean Engineering). From the numerical and experimental results, in which the hydroelastic responses are only observed in the case of the structure with a low bending stiffness, it is confirmed that the hydroelastic responses are highly dependent on the structural stiffness. Additionally, the higher-order phenomenon on the specified wave condition is analyzed by observing the higher-order springing responses when the incident wave frequency or its multiples with the high wave height coincides with the natural frequency of the structure.

• 소음진동
• /
• 제6권3호
• /
• pp.297-303
• /
• 1996

The general approach using sine series expansions was represented to evaluate the radiation loading from a vibrating surface on a simply supported cylinder. In this paper, the fluid-loading coefficients (radiation impedance) for a submerged finite cylindrical shell with an arbitrary end condition are defined and evaluated. The vibrations of cylindrical shell are expressed by using cosine series expansions to analyze the radiation impedance for a finite cylindrical shell. It is possible to represent the displacements at both ends of cylindrical shell in comparison with sine series. The direct and cross modal components of fluid-loading coefficients are shown and the validity of cosine series expansions are verified from the results of numerical computations. This approach and results are directly applicable in the analysis of sound radiation from subemerged finite cylindrical shell with arbitrary end conditions.

• 한국정밀공학회지
• /
• 제16권6호
• /
• pp.108-113
• /
• 1999

For cylindrical shells, the closed-form solutions are confined to the specific boundary and/or loading conditions. Though the finite element method is certainly a powerful solution approach for the structural dynamics problems, it has been well known to provide the solution reliable only in the low frequency region due to the inherent high sensitivities of structual and numerical modeling errors. Instead, the spectral element method has been proved to provide accurate dynamic characteristics of a structure even at the ultrasonic frequency region. Since the wave characteristic of a cylindrical shell becomes identical to that fo a flat plate as the frequency increases, an equivalent plate model (EPM) representing the high-frequency dynamic characteristics of the cylindrical shell is introduced herein. The EPM-based spectral element analysis solutions are compared with the known analytical solutions for the cylindrical shells to confirm the validity of the present modeling approach.

• Nuclear Engineering and Technology
• /
• 제47권4호
• /
• pp.488-499
• /
• 2015

Acceleration sensors are usually used to measure the vibration of a structure. Although this is the most accurate method, it cannot be used remotely because these are contact-type sensors. This makes measurement difficult in areas that cannot be easily approached by surveyors, such as structures located in high or dangerous areas. Therefore, a method that can measure the structural vibration without installing sensors is required for the vibration measurement of structures located in these areas. Many conventional studies have been carried out on non-contact-type vibration measurement methods using cameras. However, they have been applied to structures with relatively large vibration displacements such as buildings or bridges, and since most of them use targets, people still have to approach the structure to install the targets. Therefore, a new method is required to supplement the weaknesses of the conventional methods. In this paper, a method is proposed to measure vibration displacements remotely using a camera without having to approach the structure. Furthermore, an estimation method for the measurement resolution and measurement error is proposed for the vibration displacement of a cylindrical structure measured using the proposed measurement method. The proposed methods are described, along with experimental results that verify their accuracy.

• 해양환경안전학회지
• /
• 제21권4호
• /
• pp.449-456
• /
• 2015

본 연구에서는 다양한 감쇠판을 원통형 부유체에 부착하고 수치 시뮬레이션을 통해 원통형 부유체의 heave RAO 및 고유주기의 변화를 고찰하였다. 먼저 감쇠판을 부착하지 않은 원통형 부유체의 heave RAO 및 고유주기를 파악하였고, 원통형 부유체에 부착한 감쇠판의 크기와 형상을 바꿔가며 각 경우에 대한 heave RAO 및 고유주기를 평가하였다. 수치 시뮬레이션 결과, 감쇠판의 모든 면적에 대해서 감쇠판을 부착한 원통형 부유체의 고유주기는 증가하였고, 감쇠판의 크기가 1.30D부터 입사파의 피크주기에서 heave RAO는 감소하였다. 감쇠판의 모든 면적에 대해서 원형 감쇠판이 Y자형 감쇠판보다 고유주기가 길게 나타나며, 고유주기의 차이는 감쇠판의 면적이 커질수록 그 차이가 커졌다. 운동응답 스펙트럼 계산 결과, 원형 감쇠판과 Y자형 감쇠판을 부착한 원통형 부유체의 heave 운동이 입사파의 피크주기에서 현저하게 감소하였다. 또한 원형 감쇠판을 부착한 원통형 부유체의 고유주기가 Y형 감쇠판을 부착한 경우보다 입사파의 피크 주기에서 더 멀리 이동하였다.

• 전자공학회논문지
• /
• 제50권6호
• /
• pp.43-55
• /
• 2013

본 논문에서는 원통형태의 배열구조에서 수평면(H-plane), 수직면(E-Plane) 빔조향 특성을 갖는 원통형 능동위상배열 안테나를 제안하였다. 상호결합특성이 우수한 접힌 다이폴 안테나를 원통의 배열구조에 적합하도록 설계하고, 수직과 수평으로 $8{\times}8$ 원통 배열구조를 갖는 지향성 배열안테나와 전력 분배를 위한 결합분배기를 설계 및 제작하였다. 원통배열 안테나의 복사소자 배열 간격은 반전력 빔폭과 빔 조향 시 그레이팅로브가 발생하지 않도록 결정하였다. 안테나의 빔 조향은 송수신장치 내부의 6비트 위상변위기를 이용하여 구현하였으며, 안테나 빔조향 시 수평면으로 -24도 ~ 24도, 수직면 기준으로 0도 ~ 36도의 빔조향 특성을 갖도록 고안되었다.