• 한국산학기술학회논문지
• /
• 제16권3호
• /
• pp.2263-2271
• /
• 2015

압축력을 받는 얇은 원통형 쉘 구조물은 좌굴에 대한 안정성을 검토해야 한다. 좌굴에 대한 검토 시, 좌굴강도에 민감한 영향을 미치는 초기결함에 대한 중요성은 많은 선행연구에서 언급하였으나 다양한 초기결함의 영향성을 반영 할 수 있는 좌굴강도 연구가 필요하다. Eurocode에서 제시하고 있는 초기결함의 영향성을 반영하는 설계 계수 ${\alpha}$의 경우도 단면의 두께로 결정되는 특정 초기결함만을 포함하고 있어 다양한 초기결함에 대한 좌굴강도를 예측하기 어렵다. 본 논문에서는 초기결함의 영향성을 보기 위해 초기결함의 크기를 변화시켜가며 휨을 받고 있는 원통형 단면의 좌굴강도를 기하 재료비선형 해석을 통해 얻어내었다. FEM해석을 통하여 다양한 초기결함을 반영할 수 있는 수정된 ${\alpha}^{\prime}$을 제안하여 보다 합리적인 원통형 휨 좌굴강도를 계산할 수 있는 방법을 제시하였다.

• 한국공간구조학회논문집
• /
• 제20권4호
• /
• pp.53-62
• /
• 2020

This study examines the optimum shape of a trolley, the driving device of the retractable membrane roof. The closed-type trolley was determined as the model of the study, and a trolley composed of cylindrical-shaped inner and outer holders was selected as the basic model. Based on this model, a cylindrical-based optimal trolley model was proposed. In the basic trolley model, steel was used for the outer holder, and steel, titanium, and aluminum were used for the inner holder. In each case, the most economical shape for the external load of the basic model was newly proposed through the topology optimization process, and the finite element analysis results of the proposed model were compared to define the durability and economics. Here, topology optimization analysis and finite element analysis used the commercial software ANSYS. As a result of optimization, the volume of the outer holder of the trolley was reduced by 58.2% and the volume of the inner holder was reduced by 25.0% compared to the basic model. In the case of stress, a stress increase of 43.2 to 79.2% occurred depending on the material of the inner holder, but it was found to be significantly lower than the yield strength, thereby ensuring safety.

• 전기의세계
• /
• 제28권2호
• /
• pp.68-75
• /
• 1979

The penetration of an electro-magnetic wave through an aperture in a cylindrical structure with a center dielectric-rod is investgated. By using a standard mode matching procedure, the electrical and magnetic fields in a cavity are determined as a function of position inside the cavity and frequency of the incident field. For the given parameters, computed data are obtained and the results exhibited in form of amplitude curves of the nor malized field and energy densities of functions of position and frequency. Depending on the increase of the relative dielectric constant of center dielectric-rod, the resonance frequecies of the cavity vary as the cavity size decrease. The stored electro-magnetic energy varies very rapidly as a function of position inside the cavity and of the source frequency. Its peak value can be two orders of magnitude greater than the incident energy density. The frequencies where the peaks occur can be identified approximately as the resonance frequencies of the cavity.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2000년도 춘계학술발표대회 논문집
• /
• pp.1-4
• /
• 2000

This paper addresses a modified arc-length method for the nonlinear finite element analysis of a structure which is loaded in incremental and fixed forces, simultaneously. The main idea of the method is to separate the displacement term by the constant force from that by the incremental force. As the illustrative examples of the applicability of the present algorithm, a parametric study is performed on the nonlinear buckling behavior of composite cylindrical panels under the combined load of the incremented compression and the constant lateral pressure.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 추계학술대회논문집
• /
• pp.727-730
• /
• 2007

Coil inductor has been used widely as an electromagnet, because of the high magnetic filed resulting from the voltage applied to the coil. In this study the coils were used in vibration suppression as an actuator. The control system consists of a coil attached in aluminum beam and a permanent magnet set at its bottom. This actuation method is easy to be incorporated into the system and allows significant forces to be applied without contacting with the structure. Three types of coils (cylindrical type, square type, Circular sheet type) were employed in vibration suppression of cantilever beam. The positive position feedback (PPF) controller was applied to the magnet-coil actuator to suppress the first mode of vibration. Experimental results showed that the cylindrical type and square type coil made good vibration suppression efficiency under PPF controller than their eddy current damper. However, there was minimal difference for the circular sheet type coil if compared with its eddy current damper.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2007년도 춘계종합학술대회
• /
• pp.584-587
• /
• 2007

PCS를 비롯하여 WLAN, DMB, W-CDMA, UWB 등의 무선통신 서비스가 증가함에 따라 안테나 동작 대역폭의 광대역화가 더욱 요구된다. 1/4 파장 선형 모노폴 안테나는 구조가 간단하고 전방향성을 갖는 복사특성으로 인하여 가장 널리 사용되는 안테나 중의 하나이다. 모노폴 안테나의 광대역화를 위해서 일반적으로 원통의 직경을 증가시키는 방법을 사용하지만, 평면 모노폴에 적용된 스텝 기법을 적용하여 광대역 특성을 얻을 수 있다. 그러나 스텝 모노폴 자체는 광대역 특성을 나타내지 않으며, 접지면에서도 일정 형태의 스텝 돌출부위가 필요하게 된다. 본 논문에서는 그라운드면의 볼록 계단 구조가 모노폴 안테나의 대역 특성에 미치는 영향을 분석하여 최적의 안테나 급전구조를 도출하고자 한다. 결과의 검증을 위해서 소프트웨어 시물레이션 및 측정결과를 제시한다.

• 한국고분자학회:학술대회논문집
• /
• 한국고분자학회 2006년도 IUPAC International Symposium on Advanced Polymers for Emerging Technologies
• /
• pp.308-308
• /
• 2006

We have demonstrated that the cylindrical micelles self-assembled from coil-rod-coil molecules can be interconnected by addition of a small amount of rod-coil-rod molecule as a bridging agent. Subsequently, these dynamic interconnections lead to stiff bundles composed of cylindrical micelles that are responsible for the formation of a reversible nematic gel. The results described here represent a significant example that dynamic bridging of supramolecular cylinders in aqueous solution can provide a useful strategy to construct one-dimensional nematic structure with three dimensional elastic properties.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.153.5-153
• /
• 2001

This paper presents a simple modeling system that constructs 3D models from an indoor cylindrical environment map using all of the available geometry of the interior structure such as vertical and horizontal lines and parallel and perpendicular planes. The indoor scene abstract model is created through this system and the navigation through the process of 3D reconstruction. This system first automatically detects the vanishing points in a cylindrical environment map from parallel lines and planes, and determines the indoor scene topology previously defined using this information. The determined topology enables he user intervention UI simply construct a 3D model by using the photogrammetry. The modeling system can be ...

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 추계학술대회 논문집
• /
• pp.381-384
• /
• 2000

Multi-disciplinary optimization design concept can provide a solution to many engineering problems. In the field of structural analysis, much development of size or topology optimization has been achieved in the application of research. This paper demonstrates an optimum design of a multi-layer cylindrical tube which behaves thermoelastically. A multi-layer cylindrical tube that has several different material properties at each layer is optimized within allowable stress and temperature range when mechanical and thermal loads are applied simultaneously. To analyze these problems using an efficient and precise method, the optimization theories are adopted to perform thermoelastic finite element analysis.

• Wind and Structures
• /
• 제4권2호
• /
• pp.85-100
• /
• 2001

The mechanism of wind-induced ovalling vibrations of cylindrical shells is numerically investigated by using a vortex method. The subject of this paper is limited to a two-dimensional structure in the subcritical regime. The aerodynamic stability of the ovalling vibrations in the second to fourth circumferential modes is discussed, based on the results of a forced-vibration test. In the analysis, two modal configurations are considered; one is symmetric and the other is anti-symmetric with respect to a diameter parallel to the flow direction. The unsteady pressures acting on a vibrating cylinder are simulated and the work done by them for one cycle of a harmonic motion is computed. The effects of a splitter plate on the flow around the cylinder as well as on the aerodynamic stability of the ovalling vibrations are also discussed. The consideration on the mechanism of ovalling vibrations is verified by the results of a free-vibration test.