• 소음진동
• /
• 제7권2호
• /
• pp.255-260
• /
• 1997

This paper describes 3-dimensional volume array of 4 microphones including a reference microphone which is capable of imaging wideband noise source position in 2-dimensional image plane. The cross correlation function and corresponding imaging function between a reference microphone and other microphone, are derived as a function of noise source position. The magnitude of the imaging function gives noise source mapping in image plane. Since the image plane is selective from a rectangular and a cylindrical plane, noise source position information such as range and bearing relative to the array is identified very much easily. Simulation results for typical source configurations confirms the applicability of the proposed array in noise control field.

• 수산해양교육연구
• /
• 제28권6호
• /
• pp.1858-1864
• /
• 2016

Morphological and molecular information of two marine algae collected from Korea is given. One belonging to a green alga, is characterized by small size up to 4 cm high, much branched thalli on all sides, slender and linear branchlets which is constricted near base, axes without prominent branch scars, chloroplasts with a prominent central pyrenoid. The other, as a brown alga, is distinct from other Korean species in having cylindrical elevated projections at all parts of thallus axis, leaves with slightly serrulate margin together with distinct midrib bearing spines and absence to rarely occurred vesicles. In phylogenetic tree based on rbcL sequences, these two species are nested in the same clade with Bryopsis triploramosa and Sargassum polyporum, respectively. In this study, these two species are newly recorded in the Korean marine algal flora based on the morphological and molecular data.

• 한국지반신소재학회논문집
• /
• 제9권2호
• /
• pp.33-40
• /
• 2010

본 연구에서는 강재스트립 보강재에 지지부재가 결속된 형태의 보강재에 대하여 인발시험을 수행하였으며, 인발시험결과와 기존에 제안된 지지저항 평가식에 의한 결과를 비교함으로서 인발변위 50mm일 때의 인발력과 최대 인발력에 의한 지지부재의 지지저항 특성을 평가하였다. 인발변위 50mm일 때의 인발력 적용에 의한 지지저항응력(${\sigma}^{\prime}_b$)은 수직응력 증가에 따라 전면전단파괴에서 펀칭전단파괴로 근접하였으며, 지지부재 개수의 증가에 따라서는 펀칭전단파괴에서 전면전단파괴로 근접하는 것으로 확인되었다. 최대 인발력을 적용한 지지저항응력(${\sigma}^{\prime}_b$) 은 수직응력 조건 및 지지부재 개수와 관계없이 전면전단파괴에 근접하였지만, 보강토옹벽의 허용변위를 고려한다면 설계 적용에는 무리가 있을 것으로 분석되었다. 그리고 Prandtl의 소성이론 및 원주공동확장이론에 의한 이론식을 이용한 지지저항 평가는 인발시험결과가 Prandtl의 소성이론을 이용한 예측결과에 보다 가까운 것으로 확인되었다. 또한 Prandtl의 소성이론 및 원주공동확장이론을 이용한 지지저항 평가모델은 전면전단파괴와 펀칭전단파괴모델 사이에 위치하는 것을 확인하였다.

• Tribology and Lubricants
• /
• 제26권5호
• /
• pp.263-271
• /
• 2010

The rollers of cylindrical roller bearing are axially profiled to relieve high edge stress concentration caused by mainly their finite length and by misalignment. In this paper, a numerical analysis is carried to study the EHL of misaligned (tilted) rollers with axially profiled ends. Using a finite difference method with non-uniform grids and the Newton-Raphson method, the highly nonlinear EHL problems are systematically solved. Physically consistent solutions are obtained for moderate load, material parameters and very small misalignment. For different misalignment angles, contours and sectional plots of pressure and film shape near both edge regions are compared. The asymmetric pressure distributions and film shapes show that the EHL results of finite line contacts are highly dependent upon very small amounts of roller misalignment. Especially, the effect of misalignment on the EHL pressure distribution is much higher than the film shapes.

• Mycobiology
• /
• 제42권4호
• /
• pp.317-321
• /
• 2014

Fruiting bodies similar to those of the ascomycete fungi Podostroma cornu-damae and Cordyceps militaris were collected from Mt. Seunghak in Busan, Korea on August 21, 2012. The fruiting bodies were cylindrical, with tapered ends and golden red in color. The fruiting bodies contained abundant conidiophores bearing single-celled conidia, but no perithecia or asci. Pure culture of the fungal isolates was obtained through single-spore isolation. Analyses of morphological characteristics, including conidia shape, and phylogenetic traits, using internal transcribed spacer sequences, showed that these isolates belonged to the species Simplicillium lanosoniveum. Although this fungal species is known to be mycoparasitic, the isolates obtained in this study were unable to infect fungi. However, silkworms (Bombyx mori) inoculated with the fungal isolates died during the larval or pupal stages, as has been shown for the strongly entomopathogenic fungus Beauveria bassiana. This study is the first report of the entomopathogenicity of S. lanosoniveum and indicates its potential for use in biological control of insects.

• 전기학회논문지
• /
• 제58권9호
• /
• pp.1750-1756
• /
• 2009

In this paper, 5 kWh class Superconductor Flywheel Energy Storage System (SFES) was constructed including motor/generator, superconductor magnetic bearing(SMB), composite rotor and electromagnetic damper(EMD) system. High speed rotation test was performed after levitating flywheel rotor only using EMD without SMB. the PD controller of EMD was designed. the control system is constructed using xPC which is real time digital control system. the results of high speed rotation test showed that proposed EMD system have sufficient damping in cylindrical mode and conical mode, and vibration of wheel was suppressed below 10 ${\mu}m$.

• 한국산학기술학회논문지
• /
• 제19권6호
• /
• pp.581-586
• /
• 2018

주철 맨홀뚜껑은 제조과정에서 환경오염을 유발하며, 작업환경은 매우 열악하다. 또한, 맨홀 뚜껑의 높이와 도로 표면의 높이가 일치하지 않은 경우에는 많은 불편을 초래하며 안전에도 문제를 야기한다. 본 연구에서는 주철 맨홀뚜껑을 대체할 수 있고, 도로 노면 공사 시 도로 노면 높이와 맨홀 뚜껑의 높이를 동일하게 맞추기 용이한 높이 조절이 가능한 강재 맨홀 뚜껑 구조를 제안하였다. 요구되는 품질 성능을 만족시키기 위한 맨홀 뚜껑의 구조에 대한 설계변수를 파악하기 위하여 구조 해석을 수행하였다. 요구되는 내하중 용량을 만족하는 맨홀뚜껑을 제작하기 위하여 ㄷ자 모양의 보강대에 대하여 최적 설계를 수행하였다. 높이조절부의 원통과 하부 프레임 원통은 강판을 굽힘 가공하여 원형의 형상으로 만든 후 용접에 의하여 제작하였다. 또한, 보강대도 강판을 굽힘 가공하여 제작하였다. 높이 조절용 홈은 CNC 밀링머신에 의하여 가공하였다. 4차례의 시제품을 제작하여 내하중 실험을 수행하였으며, 시험의 결과를 반영하여 새로이 제작하였다. 내하중 시험에서 용접부의 파손은 발생하지 않았으며, 주로 변형은 높이조절 홈과 가셋트 판이 접촉하는 부위에서 발생하였다. 450kN의 부하 하중에 의해 1~2.7mm의 변형이 발생하지만, 하중을 제거한 후에 거의 잔류변형이 없으며, 맨홀뚜껑의 분해 및 재조립이 가능하기 때문에 내하중 평가도 만족하는 것으로 판정받았다.

• 한국기계가공학회지
• /
• 제13권1호
• /
• pp.107-114
• /
• 2014

A friction hinge system which moves without power was designed and developed using the principle of friction force, which is caused by interference between the inner diameter of a silicon cap and the outer diameter of a cylindrical roller bearing with one-way rotation in a counterclockwise direction. The system was applied to the lid of buffet ware, which moved up by external force and moved down by gravitational force. However, design conditions which included a rotation angle of the hinge of more than 80 degrees and a closing time of more than 20 seconds were required when the lid of the buffet ware closed due to gravitational force. The design safety of the friction hinge body connected to the lid of the buffet ware from the hinge system was checked on the basis of structural, fatigue and thermal analyses. The material of the shaft, cap and flange among the hinge elements was changed to polyethylene from steel to reduce the weight of the friction hinge system. An injection molding simulation was performed and injection molds of the shaft, cap and flange were created. The weight of the hinge system was decreased from 805g to 219g.

• Mycobiology
• /
• 제40권1호
• /
• pp.79-81
• /
• 2012

Cankers are localized dead areas in the bark of stems, branches or twigs of many types of trees and shrubs, and are usually caused by fungi. We observed severe canker symptoms in oak trees located in Gyeongnam province in 2011. A total 31 trees were discovered with cankers of varied size, with an average of $48.5{\times}15.2cm$. Black, half-rounded globular mound shaped stromata were associated with the cankers, and the asci of the fungi associated with the cankers were cylindrical shaped with their spore-bearing parts being up to 84 ${\mu}m$ in length. The average fungal ascospores size was $7.59{\times}4.23{\mu}m$. The internal transcribed spacer sequence for the canker causing fungus showed 99% similarity to the sequence of $Annulohypoxylon$ $truncatum$. In this study, the isolated fungus was precisely described and then compared with fungi of similar taxa.

• Steel and Composite Structures
• /
• 제19권3호
• /
• pp.661-678
• /
• 2015

Buckling Restrained Braces (BRB) have been widely used in the construction industry as they utilize the most desirable properties of both constituent materials, i.e., steel and concrete. They present excellent structural qualities such as high load bearing capacity, ductility, energy-absorption capability and good structural fire behaviour. The effects of size and type of filler material in the existed gap at the steel core-concrete interface as well as the element's cross sectional shape, on BRB's fire resistance capacity was investigated in this paper. A nonlinear sequentially-coupled thermal-stress three-dimensional model was presented and validated by experimental results. Variation of the samples was described by three groups containing, the steel cores with the same cross section areas and equal yield strength but different materials (metal and concrete) and sizes for the gap. Responses in terms of temperature distribution, critical temperature, heating elapsed time and contraction level of BRB element were examined. The study showed that the superior fire performance of BRB was obtained by altering the filler material in the gap from metal to concrete as well as by increasing the size of the gap. Also, cylindrical BRB performed better under fire conditions compared to the rectangular cross section.