• Korean Chemical Engineering Research
• /
• 제49권2호
• /
• pp.230-237
• /
• 2011

본 연구에서는 혈관 내 인공 폐(intravenous lung assist device)를 개발하기 위하여 CFD를 사용하여 새로운 형태의 인공 폐 모형에 대한 유체의 흐름 특성을 모델링하였다. 모델링을 위하여 중공사(hollow fiber)는 무시하였으며 vertical type과 tangential type이 모델로 사용되었다. 유체의 흐름 특성을 예측하기 유체의 입출구로 1개로 하였을 때와 2개로 하였을 때 그리고 입출구를 관의 중심부(vertical)와 관 벽의 접선방향(tangential)에 위치하였을 때의 흐름 특성을 파악 하였다. 실험 결과, tangential type과 같이 원통의 접선 방향으로 유체의 입구와 출구를 설정할 경우 vertical type에서 나타나는 흐름이 없는 영역(정체층)을 제거할 수 있었다. 또한 tangential type은 와류형태의 흐름이 지배적이며 한쪽으로 편중된 흐름이 아닌 복잡한 형태의 흐름이 발생하는 것으로 나타났다. 또한 유체의 입출구가 2개일 때 유체가 편중된 흐름이 발생하지 않고 관 전체에 복잡한 형태로 흐름이 발생하는 것으로 나타났다. 실험 결과를 통하여 우리는 유체가 유입되는 입구와 출구가 tangential type이며 각각 2개일 때 유체의 흐름이 복잡하며 정체층이 발생하지 않는 흐름이 발생한다는 것을 확인할 수 있었다.

• 한국수소및신에너지학회논문집
• /
• 제19권2호
• /
• pp.139-144
• /
• 2008

The focus of this research is that the scavenging aspect of in-cylinder is visualized by the PIV method and its characteristic is analyzed so that the scavenging performance of the free piston hydrogen fueled engine can improve with loop scavenging. As the results, the piston of convex type shows the best scavenging performance among the presented pistons. In case of the abnormal expansion, the scavenging of area between cylinder head and cylinder wall doesn't operate well.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 1999년도 제29회 춘계학술대회
• /
• pp.209-214
• /
• 1999

Dynamic pressure is one of the major sources on noise emission in hydraulic axial piston pump. This paper reports an experimental study of dynamic pressure characteristics in the cylinder port of hydraulic axial piston pump. We investigated dynamic pressure with not only the effect of delivery pressure, rotational speed and temperature but also V-notches at the ends of the kidney ports in the valve plate. We experimented three valve plates with three type V-notches at the ends of the kidney ports, because V-notches of the valve plate is known of noise reduction. Finally, we hope this paper help to design of the valve plate in hydraulic axial piston pump.

• 한국전자통신학회논문지
• /
• 제9권1호
• /
• pp.11-16
• /
• 2014

본 논문에서는 가늘어진 아크릴 원통이 광 결합 및 광 분배 작용을 하는 $1{\times}7$ 형태의 플라스틱 광섬유 커플러를 제안하고 구현하였다. 제작된 소자는 광 결합기로 동작 시 2.27~3.31 dB의 삽입손실과 광분배기로 동작 시 8.67~11.27dB의 삽입손실을 보였다.

• 대한치과보철학회지
• /
• 제33권2호
• /
• pp.300-316
• /
• 1995

Methods for restoring the posterior portion of the maxilla with delayed and simultaneous sinus lift, composite graft and placement of TPS cylinder and screw type implants are presented. Sinus grafting is needed because of minimal remaining alveolar bone and supporting posterior maxillary portion, The composite graft material uses a combination of autogeneous bone from tuberosity, dimeneralized freeze dried allogenic bone and hydroxylapatite with saline. Since 1991, feb, 1 sinus graft with delayed implantation of 3 cylinder implants and 5 sinus grafts with simultaneous placement of 4HA coated screw typed, 8 TPS cylinder typed implants have been performed for 6 patients. None of the 15 restored implants have been lost, Temporization of prosthesis was done about 2-5 months before final prosthetic work, None of them shows any severe complication.

• 한국생산제조학회지
• /
• 제21권2호
• /
• pp.214-220
• /
• 2012

About 12 million people of the mobility handicapped were increased by the end of 2009 year. Universal design concept has been implemented in developed countries. Since 2004 low-floor buses are in Korea. In this study, there is no provision for mobility handicapped and small buses that can be comfortable riding car ramp design presented. The gate of a small buses lowered height of 200mm. Install the ramp in the center of the ramp by an air cylinder moves from side to side. The slope of the ramp was controlled by a hinge. Air cylinder thin type applicable in the narrow space of the slide cylinder was used.

• 한국해양공학회지
• /
• 제15권4호
• /
• pp.14-19
• /
• 2001

In this paper, the wave and current forces acting on cylinders are investigated by theoretical and experimental methods. The models used are one-cylinder, four-cylinder and semi-submersible types. The theoretical investigations are carried out by the Morison equation and three dimensional source distribution method to calculate exciting forces in waves with and without currents. The experimental investigations are carried out in the wave tank which can generate currents in both directions. In these tests, the models have been exposed to the regular waves with and without currents. It is shown that the exciting forces acting on the one-cylinder or four-cylinders can be approximately estimated by the Morison equation and also by the diffraction theory. However, the Morison equation seems to be not appropriate to estimate the exciting forces on the present type of semi-submersible.

• 한국자동차공학회논문집
• /
• 제15권5호
• /
• pp.153-159
• /
• 2007

The performance of a direct-injection type diesel engine often depends on the strength of air flow in the cylinder, shape of combustion chamber, the number of nozzle holes, etc. This is of course because the process of combustion in the cylinder was affected by the mixture formation process. In the present paper, high speed photography was employed to investigate the effectiveness of holes penetrated from the bottom of cavity wall to piston crown for some more useful utilization of air. The holes would function to improve mixing of fuel and air by the increase of air flow in the cylinder. The results obtained are summarized as follows, (1) Activated first of the combustion by shorten of ignition timing and rapid flame propagation (2) Raised the combustion peak pressure, more close to TDC the formation timing of peak pressure.

• 한국연소학회지
• /
• 제13권4호
• /
• pp.8-15
• /
• 2008

When a circular cylinder is placed at the center of a slot burner nozzle, once stable Woflhard-Parker type laminar lean premixed flame is changed to an oscillating flame with self-induced noise. The wrinkled flame surface showed the same pattern and frequency of the Karman vortex street at the downstream of a circular cylinder. The interaction of flame with Karman vortex street is observed to be responsible for flame oscillation. The measured flame oscillation frequency is very similar to the estimated Karman vortex shedding frequency based on the St-Re relationship of the flow past circular cylinder, which could be considered as a strong evidence for the interaction between laminar pre-mixed flame and a Karman vortex street. As Reynolds number increases oscillation frequency decreases and the self-induced noise level increases as well as the flame front is more severly wrinkled. This result suggests that the flame/vortex interaction becomes more active at higher Re.

• Journal of Mechanical Science and Technology
• /
• 제17권2호
• /
• pp.171-180
• /
• 2003

One of the most significant problems in the processing of composite materials is residual stress. The high residual stress may cause cracking in the matrix without external loads and degrade the integrity of composite structures. In this study, thermo-viscoelastic residual stresses occurred in an aluminum liner-inserted polymer composite cylinder are investigated. This type of the structure is used for rocket fuselage due to the convenience to attach payloads and equipment to the metal liner by machining. The time and degree of cure dependent thermo-viscoelastic constitutive equations are developed and coupled with a thermo-chemical process model. These equations are solved with the finite element method to predict the residual stresses in the composite cylinder and also in the interface between the liner and the composite during cure.