• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제11권2호
• /
• pp.764-784
• /
• 2017

Energy efficiency is an essential requirement in designing a MAC protocol for wireless sensor networks (WSNs) using battery-operated sensor nodes. We proposed a new receiver-initiated MAC protocol, RIX-MAC, based on the X-MAX protocol with asynchronous duty cycles. In this paper, we analyzed the performance of RIX-MAC protocol in terms of throughput, delay, and energy consumption using the model. For modeling the protocol, we used the Markov chain model, derived the transmission and state probabilities, and obtained the equations to solve the performance of throughput, delay, and energy consumption. Our proposed model and analysis are validated by comparing numerical results obtained from the model, with simulation results using NS-2.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1999년도 춘계학술대회 논문집
• /
• pp.362-365
• /
• 1999

The electrochemical properties of flyash obtained from combustion of fuel in fossil power plants and their performance as anode material of secondary battery have been investigated Various flysh pellets molded at various molding pressure have been used as anode lithium secondary battery. The best Performance was achieved when flyash pellet molded at pressure of 400kgf/$\textrm{cm}^2$ is utilized, that is, charge capacity of 300kgf/$\textrm{cm}^2$ and Coulombic efficiency of larger than 95% have been achieved. In addition, this battery exhibited good cycling performance. Considering these results, we predicted that utilization of the flyash as anode material and polyaniline conducting polymer as cathode material in a secondary will show capacity of 300mAh/g and Coulombic efficiency of higher than 95%.

• Journal of Electrochemical Science and Technology
• /
• 제9권4호
• /
• pp.301-307
• /
• 2018

The current study fabricated magnetic functional reduced graphene oxide (MFRGO) by relying on ${FeCl_4}^-$ magnetic anion confined to cationic 1-methyl imidazolium. Furthermore, for improving the electrochemical performance of conductive polymer, hybrid poly ortho aminophenol (POAP)/ MFRGO films have then been fabricated by POAP electropolymerization in the presence of MFRGO nanorods as active electrodes for electrochemical supercapacitors. Surface and electrochemical analyses have been used for characterization of MFRGO and POAP/ MFRGO composite films. Different electrochemical methods including galvanostatic charge discharge experiments, cyclic voltammetry and electrochemical impedance spectroscopy have been applied to study the system performance. Prepared composite film exhibited a significantly high specific capacity, high rate capability and excellent cycling stability (capacitance retention of ~91% even after 1000 cycles). These results suggest that electrosynthesized composite films are a promising electrode material for energy storage applications in high-performance pseudocapacitors.

• Current Photovoltaic Research
• /
• 제9권2호
• /
• pp.36-44
• /
• 2021

To endorse the reliability and durability of the solar photovoltaic (PV) device several tests were conducted before exposing to the outdoor field in a non-ideal condition. The PV module has high probability that intend to perform adequately for 30 years under operating conditions. To evaluate the long term performance of the PV module in diversified terrestrial conditions, one should use the outdoor performance data. However, no one wants to wait for 25 years to determine the module reliability. The accelerating stress tests performing in the laboratory by mimicking different field conditions are thus important to understand the performance of a PV module. In this review, we will discuss briefly about different accelerating stress types, levels and prioritization that are used to evaluate the PV module reliability and durability before using them in real field.

• 한국공간구조학회논문집
• /
• 제23권4호
• /
• pp.71-79
• /
• 2023

In this study, a prefabricated buckling brace (PF-BRB) was proposed, and a test specimen was manufactured based on the design formula for the initial shape and structural performance tests were performed. As a result of the experiment, all standard performance requirements presented by KDS 41 17 00 and MOE 2021 were satisfied before and after replacement of the reinforcement module, and no fracture of the joint module occurred. As a result of the incremental load test, the physical properties showed a significant difference in the stiffness ratio after yielding under the compressive load of the envelope according to the experimental results. It is judged necessary to further analyze the physical properties according to the experimental results through finite element analysis in the future.

• 한국세라믹학회지
• /
• 제42권4호
• /
• pp.276-281
• /
• 2005

산소분위기, $750^{\circ}C$서 36 h 동안 하소함으로써 연소법에 의해 $LiNi_{1-y}M_{y}O_{2}(M=Zn^{2+},\;Al^{3+},\;and\;Ti^{4+},\;0.000\{\le}y{\le}0.100)$를 합성하였다. 각 시료에 대해 XRD 분석, FE-SEM 관찰, 싸이클 수에 따른 방전 용량의 변화 조사가 행해졌다. $LiNi_{0.99}M_{0.01}O_{2}$ (M=Zn, Al, and Ti) 조성이 여러 조성 중에서 대체로 우수한 전기화학적 특성을 나타내었다. 결정성과 cation mixing의 평가에서 Zn을 치환한 경우 결정성이 나쁘게 나타났고 Ti를 치환한 경우 cation mixing이 크게 나타났으며, Al을 치환한 경우 결정성이 좋고 cation mixing이 적게 나타났다. Al을 치환한 경우 싸이클 특성이 개선되었다.

• 한국수소및신에너지학회논문집
• /
• 제18권3호
• /
• pp.325-333
• /
• 2007

[ $LiNi_{0.995}Al_{0.005}O_2$ ], $LiNi_{0.990}Ti_{0.010}O_2$ and $LiNi_{0.0990}Al_{0.005}Ti_{0.005}O_2$ were synthesized with a combustion method by calcining in an $O_2$ stream at $750^{\circ}C$ for 36 h. The X-ray diffraction patterns of these synthesized samples showed $-NaFeO_2$ structure of rhombohedral system(space group; $R{\bar{3}}\;m$) with no evidence of impurities. Among these samples, $LiNi_{0.995}Al_{0.005}O_2$ exhibited comparatively high first discharge capacity and discharge capacity, and the best cycling performance. $LiNi_{0.995}Al_{0.005}O_2$ had the first discharge capacity of 165.2 mA h/g and a discharge capacity of 116.7 mA h/g at the 50th cycle at 0.1C rate. It showed the first discharge capacity of 141.0 mA h/g and a discharge capacity of 93.5 mA h/g at the 50th cycle at 0.5C rate.

• 한국세라믹학회지
• /
• 제42권5호
• /
• pp.319-325
• /
• 2005

[ $LiNiO_2$ ] was synthesized by the solid-state method after mixing $LiOH{\cdot}H_2O$ and $Ni(OH)_2$ with SPEX mill. The optimum condition for the synthesis of $LiNiO_2$ was the calcination at $750^{\circ}C$ for 30h in $O_2$ stream after milling for 1 h. The $LiNiO_2$ synthesized under this condition showed relatively large value of $I_{003}/I_{104}$ and relatively small value of R-factor. When $LiNiO_2$ was cycled in 2.7$\~$4.15 V at 0.1C-rate, the first discharge capacity was not very large (145.8 mAh/g) but it showed good cycling performance. When $LiNiO_2$ was cycled in 2.7$\~$4.2 V at 0.1C-rate, the first discharge capacity was large but ,it showed poor cycling performance probably because of the transition of H2 hexagonal structure to H3 hexagonal structure. In addition, when $LiNiO_2$ was cycled in 1.0$\~$4.8 V at 1/24C- rate, the first discharge capacity was very large (257.7 mAh/g) and the discharge capacity increased with the number of cycles.

• 한국마이크로전자및패키징학회:학술대회논문집
• /
• 한국마이크로전자및패키징학회 2001년도 Proceedings of 6th International Joint Symposium on Microeletronics and Packaging
• /
• pp.35-43
• /
• 2001

Flip chip assembly on organic substrates using ACAs have received much attentions due to many advantages such as easier processing, good electrical performance, lower cost, and low temperature processing compatible with organic substrates. ACAs are generally composed of epoxy polymer resin and small amount of conductive fillers (less than 10 wt.%). As a result, ACAs have almost the same CTE values as an epoxy material itself which are higher than conventional underfill materials which contains lots of fillers. Therefore, it is necessary to lower the CTE value of ACAs to obtain more reliable flip chip assembly on organic substrates using ACAs. To modify the ACA composite materials with some amount of conductive fillers, non-conductive fillers were incorporated into ACAs. In this paper, we investigated the effect of fillers on the thermo-mechanical properties of modified ACA composite materials and the reliability of flip chip assembly on organic substrates using modified ACA composite materials. Contact resistance changes were measured during reliability tests such as thermal cycling, high humidity and temperature, and high temperature at dry condition. It was observed that reliability results were significantly affected by CTEs of ACA materials especially at the thermal cycling test. Results showed that flip chip assembly using modified ACA composites with lower CTEs and higher modulus by loading non-conducting fillers exhibited better contact resistance behavior than conventional ACAs without non-conducting fillers. Microwave model and high-frequency measurement of the ACF flip-chip interconnection was investigated using a microwave network analysis. ACF flip chip interconnection has only below 0.1nH, and very stable up to 13 GHz. Over the 13 GHz, there was significant loss because of epoxy capacitance of ACF. However, the addition of $SiO_2filler$ to the ACF lowered the dielectric constant of the ACF materials resulting in an increase of resonance frequency up to 15 GHz. Our results indicate that the electrical performance of ACF combined with electroless Wi/Au bump interconnection is comparable to that of solder joint.

• 한국정보통신학회논문지
• /
• 제22권4호
• /
• pp.670-675
• /
• 2018

센서네트워크의 전력문제를 해결할 수 있는 에너지 수집형 무선 센서네트워크 (EH-WSN)에 대한 관심이 증가하고 있다. EH-WSN에서는 에너지 수집과 소비의 균형을 맞추기 위한 on-off 듀티싸이클링에 관한 연구가 많이 진행되고 있다. 그러나 환경감시를 위한 EH-WSN에서 센싱된 데이터의 긴급성과 에너지 수집율은 네트워크의 성능을 결정하는 중요한 요소가 된다. 따라서 단순히 전력의 균형 상태를 유지하는 것 이외에 센싱된 데이터의 중요도 및 에너지 수집율에 따라 듀티싸이클 주기를 조절할 필요성이 대두된다. 본 논문에서는 환경감시를 위한 EH-WSN에서 기존의 전력만을 고려한 on-off 듀티싸이클링의 문제점을 분석하고, 센싱값의 변화율 및 크기값에 의한 센싱 데이터의 우선순위 및 에너지 수집율 등을 고려하여 적응적으로 on-off 주기를 결정하는 듀티싸이클 스케줄링 기법을 제안한다. 시뮬레이션을 통해 제안된 듀티싸이클 스케줄링의 성능을 분석하였다.