• 대한화학회지
• /
• 제54권6호
• /
• pp.717-722
• /
• 2010

Two derivatives of star shaped compounds based on naphthylamine benzene고리에 methoxy기와 ethoxy기가 치환기로 연결되어있는 naphthylamine 관련 화합물을 합성하였다. 합성한 화합물의 전자 및 열적특성을 cyclic voltametry (CV) 및 differential scanning calorimetry (DSC)를 이용하여 조사하였다.

• Bulletin of the Korean Chemical Society
• /
• 제27권3호
• /
• pp.403-406
• /
• 2006

The surface structure and electrochemical behavior of self-assembled monolayers (SAMs) formed by aromatic thiols on Au(111) were investigated by scanning tunneling microscopy (STM) and cyclic voltammetry. Benzenethiol (BT) forms disordered phases on Au(111) which are composed of many bright domains, while benzyl mercaptan (BM), with a methylene unit between the aromatic group and sulfur atom, forms twodimensional ordered SAMs on Au(111). In addition, two phase-separated domains consisting of disordered and ordered phases were observed in binary SAMs formed from a 1 : 1 mixed ethanol solution of BT and BM. From STM and CV measurements, we found that the blocking efficiency of aromatic thiol SAMs coated on an Au(111) electrode for an electron transfer reaction decreases as the structural order of the SAMs increases. Molecular-scale STM and CV results obtained here will be very useful in designing functional SAMs for further applications, such as the improvement of corrosion passivation of Au(111) on an aromatic thiolmodified Au(111) surface.

• 한국수소및신에너지학회논문집
• /
• 제33권4호
• /
• pp.337-342
• /
• 2022

In this study, a water electrolysis was studied to investigate the effect of ammonia on current density and H2 gas production. A H type cell with three electrodes was used and KOH solution was used as electrolyte. The conventional platinum foil was used for working electrode, whereas nickel foam was used for counter electrode. CV experiment was performed to see the activity of ammonia oxidation reaction. In addition, CP experiment was done to examine the dependence of Faraday efficiency of hydrogen on current density and NH3 concentration. The CV result shows the 0.5M NH3 concentration required for highest current density and reliable operation. The CP result shows the increased current density leads to higher H2 generation. The higher H2 production and subsequent energy efficiency was observed for 0.5M NH3 using a Pt/13%Rh coil for a cathode as compared to those in water electrolysis.

• Bulletin of the Korean Chemical Society
• /
• 제30권3호
• /
• pp.618-622
• /
• 2009

The new candidates for OTFTs, which were composed of naphthalene, anthracene, benzo[1,2-b:4,5-b’]dithiophene and 2-decylbithiophene end-capper were synthesized under Suzuki coupling reaction conditions. All of the oligomers were characterized by FT-IR, mass analysis, UV-vis, PL spectrum, cyclic voltametry (CV), differential scanning calorimetry (DSC), thermal gravimetric analysis (TGA), $^1H-NMR\;and\;^{13}C-NMR$. Investigation of physical properties showed that all of the oligomers have higher oxidation potential and good thermal stability. Especially, DBT-DtB-DBT is soluble in common solvents and suitable for low cost processing technologies.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2009년도 춘계학술대회 논문집
• /
• pp.403-405
• /
• 2009

RF-스퍼터링법을 사용하여 메탄올 산화반응을 위해 박막형 전극을 제조하였다. 전극은 텅스텐 탄화물(WC)과 텅스텐 산화물($WO_3$), 그리고 백금(Pt) 타겟을 이용하였으며 그 구조적 특성과 전기화학적 특성을 TEM(Transmission electron microscopy와 CV(Cyclic Voltametry)를 통하여 촉매적 활성을 측정해 보았다. 같은 양의 백금과의 활성을 비교하고 활성을 확인하였다.

• 한국수소및신에너지학회논문집
• /
• 제18권4호
• /
• pp.446-451
• /
• 2007

Physicochemical properties of carbon nanofibers were evaluated as a supercacitor electrode materials could store electrochemical energy reversibly. A capacitance of carbon nanofiber electrode was increased gradually, depending on the PVDF binder ratio. A feasibility of EDLC electrode was estimated with specific surface area measurement by BET method and mesopore structure of carbon nanofiber surface could be explained electrochemical absorption-desorption in aqueous electrolyte. PVDF 5 wt.% ratio in electrode was observed a suitable binder amount by CV result.

• 한국응용과학기술학회지
• /
• 제29권1호
• /
• pp.102-107
• /
• 2012

황화수소가 고분자 전해질막 연료전지의 연료극에 공급되었을 때 전지 성능의 저하와 황화수소 피독 후 순환전류 전압법(CV) 스캔을 통해 전지의 성능 회복에 관한 연구를 수행하였다. 수소에 30 ppm의 황화수소를 희석하여 연료극에 공급하고 전류밀도를 $0.5A/cm^2$로 고정하여 1시간 동안 3차례 피독한 후 CV를 5회 스캔하여 단위전지의 성능회복을 확인한 결과 피독 전 단위전지의 초기 성능은 0.60 V에서 $1.16A/cm^2$이였으며, 30 ppm의 황화수소를 한 시간 동안 피독한 결과 $0.77A/cm^2$로 그 성능이 감소하였고, 피독 횟수가 증가함에 따라 성능이 0.57 V까지 감소하였다. 그리고 황화수소 피독 후 각 스텝에서 CV 스캔을 5회 실시하였을 때 단위전지의 성능이 90.3%까지 회복하는 것을 알 수 있었다. 또한, 황화수소 피독 후 단순히 고순도의 수소 가스만 연료극에 주입하여도 약 80% 정도의 성능회복이 가능하였다. 이러한 현상으로 판단할 때 황화수소 가스의 백금 촉매층에의 흡착은 그리 강하지 않음을 알 수 있었다.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2009년도 추계학술대회 논문집
• /
• pp.171-171
• /
• 2009

The electrodes are usually made of a porous mixture of carbon-supported platinum and ionomers. $SnO_2$ particles provide as supports that have been used for DMFCs, and it have high catalytic activities toward methanol oxidation. The main advantage of $SnO_2$ supported electrodes is that it has strong chemical interactions with metallic components. The high activity to a synergistic bifunctional mechanism in which Pt provides the adsorption sites for CO, while oxygen adsorbs dissociative on $SnO_2$. The reaction between the adsorbed species occurs at the Pt/$SnO_2$ boundary. The morphological observations were characterized by FESEM and transmission electron microscopy (TEM). $SnO_2$ particles crystallinity was analyzed by the X-ray diffraction (XRD). The surface bonded state of the $SnO_2$ particles and electrode materials were observed by the X-ray photoelectron spectroscopy (XPS). The electric properties of the Pt/$SnO_2$ catalyst for methanol oxidation have been investigated by the cyclic voltametry (CV) in 0.1M $H_2SO_4$ and 0.1M MeOH aqueous solution. The peak current density of methanol oxidation was increased as the $SnO_2$ content in the anode catalysts increased. Pt/$SnO_2$ catalysts improve the removal of CO ads species formed on the platinum surface during methanol electro-oxidation.

• 멤브레인
• /
• 제20권3호
• /
• pp.259-266
• /
• 2010

다공성 Poly(propylene) 분리막의 지지 하에 전해질 용액 (EC/DEC 1 : 1 혼합물 내의 $LiPF_6$ 1 M 용액) 내에서 DEGDMA [Di(ethylene glycol) dimethacrylate]의 $70^{\circ}C$ 열중합을 통하여 겔 고분자 전해질(GPE)막이 합성 되었다. 합성된 겔 고분자 전해질막의 이온전도도 및 전기화학적 안정성은 AC 임피던스법 및 CV (cyclic voltametry)법에 의하여 측정 평가하였다. 겔 고분자를 전해질로, 그리고 양극 및 음극으로는 각각 $LiMi_{0.8}Co_{0.2}O_2$ 및 graphite로 이용하여 리튬이온전지(LIB)도 제작하였다. 열중합을 통하여 리튬 이온전지에 적합한 이온전도도($10^{-3}\;S/cm$ 이상) 및 전기화학적 안정성을 보이면서 자체적인 성상을 유지하는 겔 고분자 전해질막을 얻을 수 있었다. 단량체 함량 5%의 전구체로 제작한 겔 고분자 전지는 단량체 함량이 7.0% 및 10.0%인 경우에 비하여 우수한 고율 및 충-방전 효율을 보였다.