• 한국철도학회논문집
• /
• 제17권1호
• /
• pp.43-51
• /
• 2014

철도에서 토공구조물은 입경이 큰 조립지반재료를 주요한 재료로 사용하고 있다. 그러나 이들 재료에 대한 미소변형 거동을 평가할 수 있는 동적물성 산정에 대한 연구는 대형시험장비의 부족으로 거의 이루어지지 않고 있다. 이에 본 연구에서는 국내 철도설계기준에 제시되어 있는 입도분포, 단위중량 등의 기본 조건에 맞는 강화노반(보조도상, 입도조정층), 접속부 자갈재료, 상부노반재료에 대해 대형반복삼축압축시험을 수행하여 저변형률 수준에 따른 정규화전단탄성계수와 감쇠비곡선을 제안하고, 각 재료별로 수식 모델과 계수를 제시하였다.

• 한국산학기술학회논문지
• /
• 제16권8호
• /
• pp.5654-5663
• /
• 2015

부(-)의 간극수압으로서 불포화토 내에 작용하는 석션은 입자간 응력을 증가시키며, 이에 따라 토립자 골격의 항복응력 및 소성전단강성을 증대시키는 등, 불포화토의 역학적 특성에 지대한 영향을 미친다. 따라서, 본 연구에서는 이러한 석션의 효과를 지진 등의 동적 하중조건에서 고려하기 위하여 불포화토에 대해 확장된 반복탄소성구성식에 근거한 응력-변형율 관계를 제 1 항복함수 및 제 2 항복함수를 고려하여 유도하였다. 본 관계를 2차원 및 3차원 수치해석에서 액상화 이후의 압밀거동 예측 등에 적용하는 경우에는 평균골격응력(Mean skeleton stress)의 변화를 반영하는 제 2 항복함수의 도입이 필요하나, 요소시뮬레이션에서는 제 1 항복함수만으로도 수치해석을 위한 각 물성치 및 석션 파라미터 결정이 가능할 것으로 사료된다. 본 관계와 응력반전을 반영한 반복재하 루틴을 함께 코딩(Coding)할 경우 불포화조건 하에서의 반복삼축압축시험에 대한 수치해석적 모사가 가능할 것으로 보이며, 본 연구결과는 동적 하중이 작용하는 불포화토 거동 예측의 정확도 제고에 기여할 것으로 전망된다.

• 한국지반신소재학회논문집
• /
• 제8권1호
• /
• pp.25-32
• /
• 2009

느슨한 준설 매립층은 아주 작은 지진동으로 인해 액상화가 발생하는 경우가 있다. 새만금 준설토의 액상화 거동특성을 반복삼축압축시험에 의해 조사하였고, 타 문헌에서의 다른 모래의 액상화 특성과 비교하였다. 조사를 위해 상대밀도의 변화에 따른 일련의 비배수 반복삼축압축시험이 압밀구속압을 달리하여 수행되었다. 연구결과 반복응력은 압밀구속압에 따라 선형적으로 증가하나, 반복응력을 압밀구속압으로 무차원화한 반복응력비는 일정한 값을 보인다. 또한, 상대밀도의 증가에 따라 반복응력비는 선형적으로 증가하나, 문헌조사에 의한 다른 모래에 비해 액상화에 취약한 특성을 보인다.

• 한국지반공학회논문집
• /
• 제24권11호
• /
• pp.79-89
• /
• 2008

본 연구에서는 낙동강 유역에 분포하는 모래와 실트를 대상으로 실트 함유량에 따른 모래의 비배수 반복전단강도 특성을 파악하기 위하여 이방압밀비($K_c$=1.0, 1.5, 2.0)를 달리하여 일련의 비배수 반복삼축시험을 실시하였다. 시험결과 모든 $K_c$에서 실트 함유량이 증가함에 따라 반복전단응력비(CSR)가 감소하였으며, $K_c$가 증가할수록 실트 함유량 증가에 의한 CSR의 감소가 더 크게 나타났다. 전단시 발생되는 과잉간극수압은 $K_c$에 관계없이 실트 함유량 증가에 따라 초기 과잉간극수압이 크게 발생되어 CSR의 감소에 영향을 미쳤으며, 또한 압밀 후 시료의 skeleton 간극비를 산정하여 분석한 결과 실트 함유량 증가에 비례하여 전반적으로 skeleton 간극비가 크게 증가하여 초기 과잉간극수압의 증가와 더블어 CSR 감소의 주요원인으로 파악되었다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2010년도 춘계 학술발표회
• /
• pp.852-855
• /
• 2010

Numerical simulations for large scale triaxial tests with large diameter rockfill materials are conducted using distinct element method. For generation of compacted assembly with specific grain size distribution and initial material porosity, the clump logic method and expansion of generated particles are adapted. With micro parameters which are chosen by calibration process, discrete particle modelling of triaxial test in case of other confining stress and cyclic loading condition were conducted. Also numerical simulations of fluid injection into particulate materials were conducted to observe cavity initiation and propagation using distinct element method. The fluid scheme solves the continuity and Navior-Stokes equations numerically, then derives pressure and velocity vectors for fixed grid by considering the existence of particles within the fluid cell.

• 한국지반공학회지:지반
• /
• 제2권1호
• /
• pp.7-14
• /
• 1986

The structure of the collapsible soils, such as decomposed granite soil and loess, were examined by the odeometer test, SEM & XES analysis and static & cyclic triaxial test, and hove this structure have influences upon the collapsible behaviour under static and cyclic load was investigated. The study results obtained are as follows; 1. The macropores space of decomposed granite soil (rd=1.50g/cm3) and loess (rd=1.43g/cm3) used in this test were well developed, and showed the behaviour of collapsible soil. 2. Collapsible soil has high resistance on the strain under natural moisture content, however, the resistance on the strain was sharply decreased by the absorption and increasing load since its special structure was destructed. 3. Under the static load, the strain of collapsible soil was high by the viscous flow of the cyclic bonds with time lapse, but Infer the cyclic load, the strain of collapsible soil was low since the tinge needed to destruct the bonding force of clay was not enough. 4. The understanding about the cyclic behaviour of collapsible soil may be helpful to predict the elastic & residual strain of the foundations by the earthquake together with the damage by the additional failure.

• Geomechanics and Engineering
• /
• 제21권5호
• /
• pp.433-445
• /
• 2020

The weakening and softening behavior of soft clay subjected to cyclic loading due to the build-up of excess pore water pressure is well-known. During the design stage of the foundation of highways and coastal high-rise buildings, it is important to study the mechanical behavior of marine soils under cyclic loading as they undergo greater settlement during cyclic loading than under static loading. Therefore, this research evaluates the cyclic stress-strain and shear strength of untreated and treated marine clay under the effects of wind, earthquake, and traffic loadings. A series of laboratory stress-controlled cyclic triaxial tests have been conducted on both untreated and treated marine clay using different effective confining pressures and a frequency of 0.5 and 1.0 Hz. In addition, treated samples were cured for 28 and 90 days and tested under a frequency of 2.0 Hz. The results revealed significant differences in the performance of treated marine clay samples than that of untreated samples under cyclic loading. The treated marine clay samples were able to stand up to 2000 loading cycles before failure, while untreated marine clay samples could not stand few loading cycles. The untreated marine clay displayed a higher permanent axial strain rate under cyclic loading than the treated clay due to the existence of new cementing compounds after the treatment with recycled tiles and low amount (2%) of cement. The effect of the effective confining pressure was found to be significant on untreated marine clay while its effect was not crucial for the treated samples cured for 90 days. Treated samples cured for 90 days performed better under cyclic loading than the ones cured for 28 days and this is due to the higher amount of cementitious compounds formed with time. The highest deformation was found at 0.5 Hz, which cannot be considered as a critical frequency since smaller frequencies were not used. Therefore, it is recommended to consider testing the treated marine clay using smaller frequencies than 0.5 Hz.

• 한국농공학회논문집
• /
• 제53권3호
• /
• pp.19-26
• /
• 2011

In order to estimate the viscous effects of clay over a wide range of strain levels, we confirmed the performance of a viscoelastic-viscoplastic constitutive model by simulating cyclic undrained triaxial tests to determine the cyclic strength and deformation characteristics of natural marine clay. The viscoelastic-viscoplastic constitutive model was then incorporated into an effective stress-based seismic response analysis to estimate the effects of an intermediate clay layer on the behavior of sand layers. Seismic response was simulated by the cyclic viscoelastic-viscoplastic constitutive model created with data recorded at Rokko Island, Kobe, Japan. The results show that a cyclic viscoelastic-viscoplastic constitutive model can provide a good description of dynamic behavior including viscoelastic effects, within a small strain range.

• 한국지반환경공학회 논문집
• /
• 제16권10호
• /
• pp.5-14
• /
• 2015

불포화토에는 부(-)의 압력인 석션(Suction)이 작용한다. 석션은 입자간 응력을 증가시키며, 이에 따라 토립자 골격의 항복응력 및 소성전단강성을 증대시킨다. 따라서 본 연구에서는 이러한 석션의 효과를 지진 등의 동적 하중조건에서 고려하기 위해 불포화토에 대하여 확장된 반복탄소성구성식으로부터 제1 항복함수 및 제2 항복함수를 고려하여 유도된 응력-변형률 관계를 이용하여 반복삼축시험의 요소 시뮬레이션을 수행하였다. 그 결과 응력경로, 응력-변형률 관계 및 체적변형률-축변형률 관계로부터 요소 시뮬레이션은 반복삼축거동을 양호하게 모사함을 확인하였다. 본 연구결과는 동적 하중이 작용하는 불포화토 거동 예측의 정확도 제고에 기여할 것으로 전망된다.

• 한국농공학회지
• /
• 제33권3호
• /
• pp.51-62
• /
• 1991

A comprehensive laboratory investigation of the liquefaction characteristics of Jumunjin standard sand. Seoul sand and Hongsung sand was peformed by the undrained cyclic triaxial compression test under different relative densities, confining pressures and cyclic deviator stresses. The results obtained are as follows ; 1. Liquefaction potential was dominated by the stress ratio at a given number of cycle. That is, the number of cycle required to cause initial liquefaction became samller as the stress ratio increased. 2. Liquefaction potential of a sand was infliuenced by initial relative density or void ratio. Under a given relative density. liquefaction potential of Jumunjin standard sand and Seoul sand was smaller than that of Hongsung sand. 3. The pore pressure ratio of Hongsung sand was the smallest three under a given relative density and stress ratio, and it showed higher value when the cyclic stress and the shear strain were high. 4. An excessive pore pressure ratio not found when initial shear was smaller than 0.01%, and the pore pressure ratio started to increase when initial shear became greater than 0.01%. 5. Soil texture is an important factor to cause liquefaction, and liquefaction potential decreased a the mean grain size decreased. however the sand having fine grain such as Hongsung sand showed somewhat higher liquefaction potential. 6. Based on the analysis of the specimens whose number of the cycles to cause liquefaction was 8~12, it was found that the relationship between density and stress ratio was linear. The curves for Hongsung sand was steeper than the other. 7. From the above results and the method suggested by Seed-Idriss, it may be considered that the damages by Hongsung earthquake was not directly caused by liquefaction.