• Earthquakes and Structures
• /
• v.13 no.5
• /
• pp.485-496
• /
• 2017

The behavior of 8 steel reinforced high-strength concrete (SRHSC) columns, which comprised of four identical columns with cross-shaped steel and other four identical columns with square steel tube, was investigated experimentally under cyclic uniaxial and biaxial loading independently. The influence of steel configuration and loading path on the global behavior of SRHSC columns in terms of failure process, hysteretic characteristics, stiffness degradation and ductility were investigated and discussed, as well as stress level of the longitudinal and transverse reinforcing bars and steel. The research results indicate that with a same steel ratio deformation capacity of steel reinforced concrete columns with a square steel tube is better than the one with a cross-shaped steel. Loading path affects hysteretic characteristics of the specimens significantly. Under asymmetrical loading path, hysteretic characteristics of the specimens are also asymmetry. Compared with specimens under unidirectional loading, specimens subjected to bidirectional loading have poor carrying capacity, fast stiffness degradation, small yielding displacement, poor ductility and small ultimate failure drift. It also demonstrates that loading paths affect the deformation capacity or deformation performance significantly. Longitudinal reinforcement yielding occurs before the peak load is attained, while steel yielding occurs at the peak load. During later displacement loading, strain of longitudinal and transverse reinforcing bars and steel of specimens under biaxial loading increased faster than those of specimens subjected to unidirectional loading. Therefore, the bidirectional loading path has great influence on the seismic performance such as carrying capacity and deformation performance, which should be paid more attentions in structure design.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.45 no.11
• /
• pp.23-31
• /
• 2008

This paper addresses relationships between diversity techniques and channel coding rates for OFDM and SC-FDE systems. In OFDM systems it is important to select proper channel coding rates according to multi-path channel profiles and low channel coding rates are required with cyclic delay diversity compared to the case of space time coding. On the other hand, it is not necessary to use low channel coding rates for SC-FDE systems where DFT spreading is applied to OFDM and relatively high channel coding rates can be used regardless of diversity techniques.

• Earthquakes and Structures
• /
• v.12 no.6
• /
• pp.699-712
• /
• 2017

This study evaluates the effectiveness of a newly developed retrofitting scheme for masonry-infilled non-ductile RC frames experimentally and by numerical simulation. The technique focuses on modifying the load path and yield mechanism of the infilled frame to enhance the ductility. A vertical gap between the column and the infill panel was strategically introduced so that no shear force is directly transferred to the column. Steel brackets and small vertical steel members were then provided to transfer the interactive forces between the RC frame and the masonry panel. Wire meshes and high-strength mortar were provided in areas with high stress concentration and in the panel to further reduce damage. Cyclic load tests on a large-scale specimen of a single-bay, single-story, masonry-infilled RC frame were carried out. Based on those tests, the retrofitting scheme provided significant improvement, especially in terms of ductility enhancement. All retrofitted specimens clearly exhibited much better performances than those stipulated in building standards for masonry-infilled structures. A macro-scale computer model based on a diagonal-strut concept was also developed for predicting the global behavior of the retrofitted masonry-infilled frames. This proposed model was effectively used to evaluate the global responses of the test specimens with acceptable accuracy, especially in terms of strength, stiffness and damage condition.

• Journal of KIISE:Computer Systems and Theory
• /
• v.35 no.9_10
• /
• pp.421-428
• /
• 2008

A. Ghafoor proposed Even networks as a class of fault-tolerant multiprocessor networks in [1] and analyzed so many useful properties include node disjoint paths. By introducing node disjoint paths in [1], fault diameter of Even networks is d+2(d=odd) and d+3(d=even). But the lengths of node disjoint paths proved in [1] are not the shortest. In this paper, we show that Even network Ed is node symmetric. We also propose the shortest lengths of node disjoint paths using cyclic permutation, and fault diameter of Even networks is d+1.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.11C
• /
• pp.851-859
• /
• 2008

This paper investigates the effect a guard period (GP) in the form of a cyclic prefix for asynchronous multicarrier-code division multiple access (MC-CDMA) systems. At first, we analyze the performance of asynchronous MC-CDMA systems with a GP, which results in closed-form bit error rate (BER) performance. Furthermore, it confirms that the frequency diversity of MC-CDMA systems is identical to the path diversity. The analytical approach proposed here is extended to the case without a GP. The derived analytical results show that a GP is required for MC-CDMA systems in order to mitigate not only the effect of intersymbol interference (ISI) and intercarrier interference (ICI) but also the desired signal power degradation. In addition, the accuracy of the proposed analysis is verified by simulations.

• Journal of Korea Society of Industrial Information Systems
• /
• v.20 no.6
• /
• pp.1-10
• /
• 2015

In this paper, we propose a spectral efficient orthogonal frequency division multiple access(OFDMA) transmission system using multiple relays for a shadow area. The performance of the proposed OFDMA system in a shadow area can be improved by applying space-frequency(SF) block code over relaying multi-path channels. A simple channel cyclicity restoration method is also added in the proposed OFDMA system without cyclic prefix(CP) to recover the destruction of channel cyclicity due to the lack of CP. Simulation results show that the proposed OFDMA system without CP is almost same as that of the conventional OFDMA system with sufficient CP, which increases the spectral efficiency of the system.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.10
• /
• pp.2367-2372
• /
• 2015

One of various low-density parity-check(LDPC) codes that has been adopted in many communication standards due to its error correction ability is a quasi-cyclic LDPC(QC-LDPC) code, which leads to comparable decoder complexity. One of the main blocks in the QC-LCDC code decoder is a multi-size circular shifter(MSCS) that can perform various size rotation. The MSCS can be implemented with many structures, one of which is based on Banes network. The Benes network structure can perform the normal MSCS operation efficiently, but it cannot use the properties coming from specifications like rotation sizes. This paper proposesd a scheme where the Benes network structure can use the rotation size property with the modification of the control signal generation. The proposed scheme is applied to the MSCS of IEEE 802.16e WiMAX QC-LDPC decoder to reduce the number of MUXes and the critical path delay.

• Journal of the Korean Chemical Society
• /
• v.40 no.7
• /
• pp.483-491
• /
• 1996

Dieis-Alder reaction between cyclopentadiene and 5-membered ring compounds which have exo-cyclic double bond has been studied using the PM3 method. Transition states do not show large geometrical change with the variation of dienophiles. Two isomers are possible due to the rotation of the exo-cyclic double bond of a dienophile. The reactivity for the formation of different products are explained using the FMO energy gap. The exo and endo selectivity of the reaction has been also studied from the correlation between the deformation energy and the activation barrier. Minimum energy reaction path is discussed using the Curtin-Hammett principle.

• Journal of Korean Association for Spatial Structures
• /
• v.13 no.2
• /
• pp.83-91
• /
• 2013

The core aim of this dissertation is to empirically scrutinize a strength characteristic of beam-column frame subjected to the cyclic lateral load, a beam-column frame of un-reinforced masonry wall, and a shear wall frame. First and foremost, I embark upon making three prototypes vis-$\grave{a}$-vis this research. By conducting this process, I touch on an analysis of cyclic behavior and a damage characteristic of the beam-column frame, the beam-column frame of un-reinforced masonry wall, and the shear wall frame. What is more, through the previous procedure, the next part delves into the exact stress transfer path and the destructive mechanism to examine how much and how strong the beam-column frame of un-reinforced Masonry Wall does have a resistance capacity against earthquake in all the architecture constructed by the above-mentioned frame, as well as school buildings. In addition to the three prototypes, two more experimental models, a beam-column frame and shear wall frame, are used to compare with the beam-column frame of un-reinforced masonry wall. Lastly, the dissertation will suggest some solutions to improve the resistance capacity against earthquake regarding all constructions built with non bearing wall following having examining precisely all the analysis with regard to not only behavior properties and the damage mechanism of the beam-column frame and the beam-column frame of un-reinforced Masonry Wall but also the resistance capacity against earthquake of non bearing wall and school buildings.

• Bulletin of the Korean Chemical Society
• /
• v.31 no.6
• /
• pp.1543-1550
• /
• 2010

This work presents oxidation of formic acid on Bi-modified Pt nanoparticles of various sizes. The sizes of the studied Pt nanoparticles range from 1.5 to 5.6 nm (detailed in Rhee, C. K.; Kim, B.-J.; Ham, C.; Kim, Y.-J.; Song, K.; Kwon, K. Langmuir 2009, 25, 7140-7147), and the surfaces of the Pt nanoparticles are modified with irreversibly adsorbed Bi. The investigated coverages of Bi on the Pt nanoparticles are 0.12 and 0.25 as determined by coulometry of the oxidation of adsorbed hydrogen and Bi, and X-ray photoelectron spectroscopy. The cyclic voltammetric behavior of formic acid oxidation reveals that the adsorbed Bi enhances the catalytic activity of Pt nanoparticles by impeding a poison-forming dehydration path with a concomitant promotion of a dehydrogenation path. The chronoamperometric results indicate that elemental Bi and partially oxidized Bi are responsible for the catalytic enhancement, when the Bi coverages on Pt nanoparticles are 0.12 and 0.25, respectively. The size effect of Bi-modified Pt nanoparticles in formic acid oxidation is discussed in terms of specific activity (current per unit surface area) and mass activity (current per unit mass).