• Journal of Environmental Science International
• /
• v.21 no.12
• /
• pp.1425-1433
• /
• 2012

Water temperature in the eastern part of the Yellow Sea (EYS) during winter (JFM) and summer (JJA) from 1964 to 2009 and Siberian High Pressure Index (SHI) and Arctic Oscillation index (AOI) during winter (JFM) from 1950 to 2011 were used to analyze long-term variation in oceanic and atmospheric conditions and relationship between winter and summer bottom water temperature. Winter water temperature at 0, 30 and 50 m had fluctuated highly till the late of 1980s, but after this it was relatively stable. The long-term trends in winter water temperature at both depths were separated with cold regime and warm regime on the basis of the late 1980s. Winter water temperature at 0m and 50m during warm regime increased about $0.9^{\circ}C$ and $1.1^{\circ}C$ respectively compared to that during cold regime. Fluctuation pattern in winter water temperature matched well with SHI and AOI The SHI had negative correlation with water temperature at 0 m (r=-0.51) and 50 m (r=-0.58). On the other hand, the AO had positive correlation with Winter water temperature at 0 m (r=0.34) and 50 m (r=0.45). Cyclic fluctuation pattern of winter water temperature had a relation with SHI and AO, in particular two to six-year periodicity were dominant from the early of the 1970s to the early of the 1980s. Before the late of 1980s, change pattern in winter water temperature at 0 and 50 m was similar with that in the bottom water temperature during summer, but after this, relationship between two variables was low.

• Journal of Convergence for Information Technology
• /
• v.7 no.4
• /
• pp.1-9
• /
• 2017

The purpose of this study, is to identify the factors affecting reuse intention, determine the accurate demand of suppliers and consumers for qualitative dental care service, and identify the cyclic factors positively affecting one another. The data were analyzed by SPSSWIN 18.0, t-test and one way ANOVA, Pearson correlation and Stepwise multiple regression. Human service quality was significantly positively correlated with service value (r=0.609) and reuse intention (r=0.627) and service value was significantly positively correlated with reuse intention (r=0.645). The higher service value, the higher human service quality, the lower medical service discrimination, the higher level of reuse intention, which accounted for 56.9%. Therefore, it is necessary to make optimal maintenance of the system from the broad viewpoint of dental care in general and apply it in practice by developing good methods steadily.

• Journal of Pharmacopuncture
• /
• v.19 no.3
• /
• pp.239-245
• /
• 2016

Objectives: This study was conducted to clarify the effects of agarwood on histamine release from mast cells in rats and on the scratching behaviors in mice. Methods: Histamine release from rat mast cells induced by compound 48/80 or concanavalin A (Con A) and compound 48/80-induced scratching behavior in mice were examined to investigate the effects of agarwood. The hyaluronidase activity and the 3',5'-cyclic adenosine monophosphate (cAMP) levels in mast cells were examined to investigate the mechanisms for the inhibition of histamine release. The correlation between the inhibitory effects of agarwood on histamine release and the content of its typical ingredients, a 2-(2-phenylethyl)chromone derivatives, was analyzed using thin-layer chromatography. Results: Agarwood showed an inhibitory effect on mast-cell histamine release induced by compound 48/80 or Con A without any effect on hyaluronidase activity; this effect involves an increase in the cAMP levels in mast cells. Oral administration of agarwood showed an inhibitory effect on compound 48/80-induced scratching behavior in mice. The inhibitory effects of agarwood on histamine release were quite different, depending on the area where the agarwood was produced, its quality, and its market price. No correlation was found between the inhibitory effects of agarwood on histamine release and the typical ingredients of agarwood, which are 2-(2-phenylethyl)chromone derivatives. Conclusion: These results show that agarwood inhibits histamine release from mast cells partially through an increase in the cAMP levels in cells. We suggest that some active ingredients of agarwood must be effective on oral intake and that agarwood can be used to treat patients with a number of conditions, including urticaria, atopic dermatitis, and bronchial asthma, in which an increase in histamine release occurs. Differences in the pharmacological effects of this crude drug among markets may provide important information for the quality control of this herbal medicine.

• Steel and Composite Structures
• /
• v.48 no.4
• /
• pp.385-403
• /
• 2023

To avoid premature damage to the connection joints of a conventional precast concrete shear wall, a new precast concrete shear wall system (NPSW) based on a plastic damage relocation design concept was proposed. Five specimens, including one monolithic cast-in-place concrete shear wall (MSW) as a reference and four NPSWs with different connection details (TNPSW, INPSW, HNPSW, and TNPSW-N), were designed and tested by lateral low-cyclic loading. To accurately assess the damage relocation effect and quantify the damage and deformation, digital image correlation (DIC) and conventional data acquisition methods were used in the experimental program. The concrete cracking development, crack area ratio, maximum residual crack width, curvature of the wall panel, lateral displacement, and deformed shapes of the specimens were investigated. The results showed that the plastic damage relocation design concept was effective; the initial cracking occurred at the bottom of the precast shear wall panel (middle section) of the proposed NPSWs. The test results indicated that the crack area ratio and the maximum residual crack width of the NPSWs were less than those of the MSW. The NPSWs were deformed continuously; significant distortions did not occur in their connection regions, demonstrating the merits of the proposed NPSWs. The curvatures of the middle sections of the NPSWs were lower than that of the MSW after a drift ratio of 0.5%. Among the NPSWs, HNPSW demonstrated the best performance, as its crack area ratio, concrete damage, and maximum residual crack width were the lowest.

• Clinical and Experimental Reproductive Medicine
• /
• v.14 no.2
• /
• pp.85-92
• /
• 1987

To estimate the influence of plasma copper and zinc concentration on infertility, we measured copper and zinc levels in plasma of 117 infertile women and 14 infertile men by atomic absorption spectrophotometry from January, 1987 through June, 1987 and the results were as follows. 1. The mean plasma copper level was significantly lower in infertile women than in fertile control women while mean plasma zinc level significantly higher in infertile women than in fertile control women. 2. A significant difference in the mean plasma level between infertile women with tubal and endometrial factor and normal controls was noted. 3. The mean level of copper in plasma of azoospermic patients was significantly higher than in fertile control subjects. 4. In fertile control and infertile women, no diurnal and menstrual cyclic variations in plasma zinc and copper levels were present, respectively. Also, there were no significant correlation between plasma zinc and copper levels in all studied group of subjects.

• Journal of the Korean Electrochemical Society
• /
• v.13 no.4
• /
• pp.246-250
• /
• 2010

In this study, nano-crystallized $Al_2O_3$ was coated on the surface of $LiFePO_4$ powders via a novel dry coating method. The influence of coated $LiFePO_4$ upon electrochemical behavior was discussed. Surface morphology characterization was achieved by transmission electron microscopy (TEM), clearly showing nano-crystallized $Al_2O_3$ on $LiFePO_4$ surfaces. Furthermore, it revealed that the $Al_2O_3$-coated $LiFePO_4$ cathode exhibited a distinct surface morphology. It was also found that the $Al_2O_3$ coating reduces capacity fading especially at high charge/discharge rates. Results from the cyclic voltammogram measurements (2.5-4.2 V) showed a significant decrease in both interfacial resistance and cathode polarization. This behavior implies that $Al_2O_3$ can prevent structural change of $LiFePO_4$ or reaction with the electrolyte on cycling. In addition, the $Al_2O_3$ coated $LiFePO_4$ compound showed highly improved area-specific impedance (ASI), an important measure of battery performance. From the correlation between these characteristics of bare and coated $LiFePO_4$, the role of $Al_2O_3$ coating played on the electrochemical performance of $LiFePO_4$ was probed.

• YAKHAK HOEJI
• /
• v.50 no.1
• /
• pp.40-46
• /
• 2006

Square wave voltammetric (SWV) and cyclic voltammetric (CV) behaviors of cefotaxime sodium and ceftriaxone sodium have been investigated in the potential range between -0.10 V and -1.30 V using the phosphate buffers of various pH values ($2.00{\sim}9.10$). Two main peaks observed were irreversible and protons were involved in their electrochemical reductions. The first peaks of these cephalosporin antibiotics are due to the reduction of the azomethine double bond in the methoxyimino group of the side chain at position 7. The second peaks of cefotaxime sodium and ceftriaxone sodium are related to the reductions of the ${\Delta}^3$ double bond and the dioxo moiety of the side chain at position 3, respectively. The calibration curve of cefotaxime sodium in the concentration range between $1.0{\times}10^{-7}M$ and $1.0{\times}10^{-5}M$ yielded the linearity with the correlation coefficient of 0.9998 when the first peak of the antibiotic in a phosphate buffer of pH 3.02 was measured at the conditions of frequency of 120 Hz and pulse height of 50 mV by SWV. The present fast, simple and accurate SWV assay method was applied to determine cefotaxime sodium in the commercial antibiotic powder of injection.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1999.10a
• /
• pp.389-392
• /
• 1999

Fatigue is a process of progressive permanent internal structural change in a material subjected to repeitive stresses. These change may be damaging and result in progressive growth of cracks and complete fracture if the stress repetitins are sufficiently large. For structural members subjected to cyclic loads, the continuous and irrecoverable damage processes are taking place. These processes are referred as the cumulative damage processes due to fatigue loading. Moreover, increased use of high strength concrete makes the fatigue problem more important because the cross-section and dead weight are reduced by using high strength concrete. The purpose of this study is to investigate the shear fatigue behavior of reinforced concrete beams according to shear reinforcement ratio and concrete compressive strength under repeated loadings. For this purpose, comprehensive static and fatigue tests of reinforced concrete beams were conducted. The major test variables for the fatigue teats are the concrete strength and the amount of shear reinforcements. The increase of deflections and steel strains according to load repetition has been plotted and analyzed to explore the damage accumulation phenomena of reinforced concrete beams. An analytical model for shear fatigue behavior has been introduced to analyze the damage accumulation under fatigue loads. The failure mode and fatigue lives have been also studied in the present study. The comparisons between analytical results and experimental data show good correlation.

• Journal of Advanced Marine Engineering and Technology
• /
• v.29 no.5
• /
• pp.519-525
• /
• 2005

An electrochemical evaluation on the corrosion resistance for heavy anticorrosive paint(DFT:25um) was carried out for 5 kinds of heavy anticorrosive paints such as high solid epoxy(HE), solvent free epoxy(SE). tar epoxy(TE), phenol epoxy(PE). and ceramic epoxy(CE). Corrosion current densities obtained by Tafel extrapolation method from anodic and cathodic polarization curves didn't correspond with the values obtained by AC impedance measurement, however, the values of polarization resistance obtained from the cyclic voltammogram showed a good tendency corresponding well with the values of AC impedance measurement. Futhermore there was a good correlation against the corrosion resistance evaluation between passivity current density of the anodic polarization curve and diffusion limiting current density of the cathodic polarization curve. And corrosion resistance increased with corrosion potential shifting to noble direction. From the results discussed above. HE and CE had a relatively good corrosion resistance than other heavy anticorrosive paints.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.26 no.8
• /
• pp.1645-1652
• /
• 2002

The failure analysis on fractured parts is divided into the qualitative method by naked eyes and metallurgical microscope etc. and the quantitative method by SEM and X-ray diffraction etc. X-ray fractography can be applied to contaminated surface as well as clean surface and gain the plastic deformation and the residual stress near the fractured surface. Turbine blade is subject to cyclic bending force by steam pressure and suffers fatigue damage according to the increasing operating time. Therefore, to clean up the fracture mechanism of torsion-mounted blade in nuclear plant, the fatigue and the X-ray diffraction test was performed on the 12%Cr steel fur turbine blade and the fractured parts. The correlation of X-ray parameter and fracture mechanics parameter was determined, and then the load applied to actual broken turbine blade was predicted. Failure analysis was performed by contact stress analysis and Goodman diagram of torsion-mounted blade.