• Proceedings of the International Microelectronics And Packaging Society Conference
• /
• 2004.09a
• /
• pp.233-241
• /
• 2004

A new alloy definition will be presented concerning increasing demands for the board level reliability of miniaturized interconnections. The damage mechanism for LFBGA components on different board finishes is not quite understood. Further demands from mobile phones are the drop test, characterizing interface performance of different package constructions in relation to decreased pad constructions and therefore interfaces. The paper discusses the characterization of interfaces based on SnPb, SnPbXYZ, SnAgCu and SnAgCuInNd ball materials and SnAgCuInNd as solder paste, the stability after accelerated tests and the description of modified interfaces strictly related to the assembly conditions, dissolution behavior of finishes on board side and the influence of intermetallic formation. The type of intermetallic as well as the quantity of intermetallics are observed, primaliry the hardness, E modules describing the ability of strain/stress compensation. First results of board level reliability are presented after TCT-40/+150. Improvement steps from the ball formulation will be discussed in conjunction to the implementation of lead free materials In order to optimize ball materials for area array devices accelareted aging conditions like TCTs were used to analyze the board level reliability of different ball materials for BGA, LFBGA, CSP, Flip Chip. The paper outlines lead-free ball analysis in comparison to conventional solder balls for BGA and chip size packages. The important points of interest are the description of processability related to existing ball attach procedures, requirements of interconnection properties and the knowledge gained the board level reliability. Both are the primary acceptance criteria for implementation. Knowledge about melting characteristic, surface tension depend on temperature and organic vehicles, wetting behavior, electrical conductivity, thermal conductivity, specific heat, mechanical strength, creep and relaxation properties, interactions to preferred finishes (minor impurities), intermetallic growth, content of IMC, brittleness depend on solved elements/IMC, fatigue resistance, damage mechanism, affinity against oxygen, reduction potential, decontamination efforts, endo-/exothermic reactions, diffusion properties related to finishes or bare materials, isothermal fatigue, thermo-cyclic fatigue, corrosion properties, lifetime prediction based on board level results, compatibility with rework/repair solders, rework temperatures of modified solders (Impurities, change in the melting point or range), compatibility to components and laminates.

• Proceedings of the International Microelectronics And Packaging Society Conference
• /
• 2004.09a
• /
• pp.211-219
• /
• 2004

A new alloy definition will be presented concerning increasing demands for the board level reliability of miniaturized interconnections. The damage mechanism for LFBGA components on different board finishes is not quite understood. Further demands from mobile phones are the drop test, characterizing interface performance of different package constructions in relation to decreased pad constructions and therefore interfaces. The paper discusses the characterization of interfaces based on SnPb, SnPbXYZ, SnAgCu and SnAgCuInNd ball materials and SnAgCuInNd as solder paste, the stability after accelerated tests and the description of modified interfaces stric시y related to the assembly conditions, dissolution behavior of finishes on board side and the influence of intermetallic formation. The type of intermetallic as well as the quantity of intermetallics are observed, primaliry the hardness, E modules describing the ability of strain/stress compensation. First results of board level reliability are presented after TCT-40/+150. Improvement steps from the ball formulation will be discussed in conjunction to the implementation of lead free materials. In order to optimize ball materials for area array devices accelareted aging conditions like TCTs were used to analyze the board level reliability of different ball materials for BGA, LFBGA, CSP, Flip Chip. The paper outlines lead-free ball analysis in comparison to conventional solder balls for BGA and chip size packages. The important points of interest are the description of processability related to existing ball attach procedures, requirements of interconnection properties and the knowledge gained the board level reliability. Both are the primary acceptance criteria for implementation. Knowledge about melting characteristic, surface tension depend on temperature and organic vehicles, wetting behavior, electrical conductivity, thermal conductivity, specific heat, mechanical strength, creep and relaxation properties, interactions to preferred finishes (minor impurities), intermetallic growth, content of IMC, brittleness depend on solved elements/IMC, fatigue resistance, damage mechanism, affinity against oxygen, reduction potential, decontamination efforts, endo-/exothermic reactions, diffusion properties related to finishes or bare materials, isothermal fatigue, thermo-cyclic fatigue, corrosion properties, lifetime prediction based on board level results, compatibility with rework/repair solders, rework temperatures of modified solders (Impurities, change in the melting point or range), compatibility to components and laminates.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2010.05a
• /
• pp.37.1-37.1
• /
• 2010

The multi-component olivine cathode material, $LiMn_{1/3}Fe_{1/3}Co_{1/3}PO_4$, was prepared via a novel coprecipitation method of the mixed transition metal oxalate, $Mn_{1/3}Fe_{1/3}Co_{1/3}(C_2O_4){\cdot}2H_2O$. The stoichiometric ratio and distribution of transition metals in the oxalate, therefore, in the olivine product, was affected sensitively by the environments in the coprecipitation process, while they are the important factors in determining the electrochemical property of electrode materials with multiple transition metals. The effect of the pH, atmosphere, temperature, and aging time was investigated thoroughly with respect to the atomic ratio of transition metals, phase purity, and morphology of the mixed transition metal oxalate. The electrochemical activity of each transition metal in the olivine synthesized through this method clearly was enhanced as indicated in the cyclic voltammetry (CV) and galvanostatic charge/discharge measurement. Three distinctive contributions from Mn, Fe, and Co redox couples were detected reversibly in multiple charge and discharge processes. The first discharge capacity at the C/5 rate was $140.5\;mAh\;g^{-1}$ with good cycle retention. The rate capability test showed that the high capacity still is retained even at the 4C and 6C rates with 102 and $81\;mAh\;g^{-1}$, respectively.

• Journal of Applied Biological Chemistry
• /
• v.62 no.3
• /
• pp.305-313
• /
• 2019

Men's climactic syndrome, andropause, or testosterone deficit syndrome, is one of the new problems with the health of older men in the age of aging. This phenomenon is a natural phenomenon occurring in men as they age, clinically characterized by a decrease in blood testosterone levels and a marked decrease in physical and mental activity. The purpose of this study was to investigate the effect of hydrothermal extract of Taraxacum coreanum by comparing the levels of nitric oxide (NO) in the cavernosum and the levels of male hormone in the blood. Taraxacum coreanum extract increased NO production in vitro and in vivo in a dose-dependent manner. Levels of dihydrotestosterone and 17-hydroxyysteroid dehydrogenases, as well as levels of neurogenic nitric oxide synthase and cGMP, increased significantly in elderly rats (22 weeks) after 4 weeks of daily intake of Taraxacum coreanum extract. However, prostaglandin $E_2$, testosterone, and sexually-hormone-binding globulin levels were not different among all groups. Furthermore, total sperm and motile sperm counts were also no significant difference. Overall, these results suggest the possibility of Taraxacum coreanum extract as a safe and effective natural substance for enhancing NO, cGMP and free testosterone.

• Korean Journal of Adult Nursing
• /
• v.12 no.4
• /
• pp.690-705
• /
• 2000

This ethnography was based on Kleinman's explanatory model of a health care system. It is conducted to make thick discription of illness conception of the elderly in a sociocultural context. The basic assumptions were as follows. 1) A health care system is a cultural system, and as with any other cultural system, it is a system of symbolic meanings anchored in a particular arrangement of social institutions and patterns of interpersonal relationships; 2) In all societies health care activities are more or less interrelated. Therefore, they need to be in a holistic manner as socially organized responses to disease that constitute a special cultural system; health care system; 3) Health and illness experiences are the natural process of disease. Individuals who recognized a for state of health, their family, neighbors, and communities define the state, search for causes of the health problems, and response to it. According by, they proceed to search for healing stratagies. So, understanding of the illness experience is the starting point for health care. The study participants were 12 elders aged 60 or more. The fieldwork was conducted in an agricultural clan village of Namwon city. The data collection and analysis were cyclic, from descriptive observation, domain analysis, focused observation, taxanomic analysis, selected observation, componential analysis, and finally cultural themes were all analysed. Proxemic and text analysis techniques were used according to the characteristics of the data. The data of sociocultural context and descriptive data were collected from 1990 to 1992. Informations on illness concepts were collected during 1994 using focused observation. Data confirming and contrast observations were conducted from 1997 and 1999. Illness concepts of the elderly were taxonomized supernatural cause, non-supernatural cause, immediate cause, and ultimate cause. The supernatural ones were ancestors, god of home, god of village, and ghost such as 'sal(evil force of dead man)' and 'gagqui(ghost of begger)'. The non-supernatural ones were Ki, natural phenomenones, natural objects, foods, human and human behaviors. Immediate ones were insufficiency and overflows, discretion and consolidation, disorder and out of order, cloudness and contamination, and fluctuation and stagnation of supernatural cause and non-supernatural ones. Ultimate causes were intrusion and loss of supernatural and nonsupernatural ones. The cultural themes of illness concepts of the elderly are: 1) illness concepts are not based on causality principle, but on reciprocal principle; 2) illness concepts are affected by social level and charicteristics of the patients; 3) the causes of disease are recognized as imposed both positive and negative effects on health based on interpretation of the indiviuals; 4) illness concepts reflects on principles of everyday life of the society members such as hierachial structure and group cohesiveness; 5) illness concepts are ruled on principle of reciprocity and spread; 6) illness concepts are interrelated with physical environment of the participants. It can be concluded that the illness concepts of the elderly in a traditional clan village are a component of health care system as a cultural system based on these results. The these results can be a useful basis for gerontological nursing practice and education.

• Journal of the East Asian Society of Dietary Life
• /
• v.20 no.5
• /
• pp.735-742
• /
• 2010

Biogenic amines are synthesized by microbial decarboxylation for the putrefaction or fermentation of foods containing protein. Although biogenic amines such as histamine, tyramine, and putrescine are required for many physiological functions in humans and animals, consumption of high amounts of biogenic amines can cause toxicological effects, including serious gastrointestinal, cutaneous, hemodynamic, and neurological symptoms. In this study, a novel amperometric biosensor wasdeveloped to detect biogenic amines. The biosensor consisted of a working electrode, a reference electrode, a counter electrode, an enzyme reactor with immobilized diamine oxidase, an injector, a peristaltic pump and a potentiostat. A working electrode was fabricated with a glassy carbon electrode (GCE) by coating functionalized multi-walled carbon nanotubes (MWCNT-$NH_2$) and by electrodepositing Prussian blue (PB) to enhance electrical conductivity. A sensor system with PB/MWCNT-$NH_2$/GCE showed linearity in the range of $0.5 {\mu}M{\sim}100 {\mu}M$ hydrogen peroxide with a detection limit of $0.5 {\mu}M$. The responses for tyramine, 2-phenylethylamine, and tryptamine were 95%, 75%, and 70% compared to that of histamine, respectively. These results imply that the biosensor system can be applied to the quantitative measurement of biogenic amines.