• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.32 no.5
• /
• pp.573-581
• /
• 1999

The study was carried out to determine the toxicity of cyanide on the hemochemical changes of Israel carp, Cyprinus carpio reared under a continuous-flow system for 5 weeks, The carps exposed to cyanide concentation oyer 151 $\mu$g/$\ell$ started to decrease significantly in red blood cell count, hemoglobin concentration and hematocrit value at week 4. However a significant elevation of MCH and MCV was noticed a week later, at week 5 at cyanide concentration 289 $\mu$g/$\ell$. The low concentration of serum calcium was observed at the last week of the experiment in cyanide concentration 151 $\mu$g/$\ell$, while serum magnesium concentration initiated to increase from the 4th week at the cyanide concentration 289 $\mu$g/$\ell$. Serum -total protein, albumin and glucose concentrations decreased significantly after 4th week at the concentration over 151 $\mu$g/$\ell$. A significant increment of GOT, GPT and LDH activities in the carp serum was noticed after 3rd week at cyanide concentrations over 151$\mu$g/$\ell$ without typical changes of Al-P and amylase, These results indicate that carps can be affected by cyanide in terms of red blood cell count, hemoglobin concentration and hematocrit value in blood, calcium and magnesium concentration, GOT, GPT and LDH activities in serum when they were exposed to the cyanide concentrations 151 $\mu$g/$\ell$ or higher.

• Journal of the Korean GEO-environmental Society
• /
• v.16 no.3
• /
• pp.35-39
• /
• 2015

Continuous adsorption and recovery characteristics for gold and lead-cyanide complexes in industrial wastewater were investigated by the Dowex 21K XLT resin. The Dowex 21K XLT resin could continuously remove over 95% for gold-cyanide complex until 520 bed volumes at the 0.5 mL/min of influent flow rate, however, could not remove lead-cyanide complex at all. The 96% of gold-cyanide complex adsorbed onto Dowex 21K XLT resin could be recovered by mixed solvent with HCl and acetone (7:3 ratio) within 8 bed volumes. Also, the bed volume for gold-cyanide complex using secondly reused Dowex 21K XLT resin was maintained as the 490, therefore, continuous process using Dowex 21K XLT resin can be sufficiently applied to the industrial wastewater containing gold ions.

• Journal of Microbiology and Biotechnology
• /
• v.16 no.2
• /
• pp.232-239
• /
• 2006

The microbial activity and bacterial community structure of activated sludge reactors, which treated free cyanide (FC), zinc-complexed cyanide (ZC), or nickel-complexed cyanide (NC), were studied. The three reactors (designated as re-FC, re-ZC, and re-NC) were operated for 50 days with a stepwise decrease of hydraulic retention time. In the re-FC and re-ZC reactors, FC or ZC was almost completely removed, whereas approximately 80-87% of NC was removed in re-NC. This result might be attributed to the high toxicity of nickel released after degradation of NC. In the batch test, the sludges taken from re-FC and re-ZC completely degraded FC, ZC, and NC, whereas the sludge from re-NC degraded only NC. Although re-FC and re-ZC showed similar properties in regard to cyanide degradation, denaturing gradient gel electrophoresis (DGGE) analysis of the 16S rRNA gene of the bacterial communities in the three reactors showed that bacterial community was specifically acclimated to each reactor. We found several bacterial sequences in DGGE bands that showed high similarity to known cyanide-degrading bacteria such as Klebsiella spp., Acidovorax spp., and Achromobacter xylosoxidans. Flocforming microorganism might also be one of the major microorganisms, since many sequences related to Zoogloea, Microbacterium, and phylum TM7 were detected in all the reactors.

• Journal of Korean Society on Water Environment
• /
• v.25 no.6
• /
• pp.979-983
• /
• 2009

The mean pH of wastewater discharged from the plating process is 2, so a less amount of alkali is required to raise pH 2 to 5. In addition, if sodium sulfite is used to raise pH 5 to 9 in the secondary treatment, caustic soda or slaked lime is not necessary or only a small amount is necessary because sodium sulfite is alkali. Thus, it is considered desirable to use only $FeSO_4{\cdot}7H_2O$ in the primary treatment. At that time, the free cyanide removal rate was highest as around 99.3%, and among heavy metals, Ni showed the highest removal rate as around 92%, but zinc and chrome showed a low removal rate. In addition, the optimal amount of $FeSO_4{\cdot}7H_2O$ was 0.3g/L, at which the cyanide removal rate was highest. Besides, the free cyanide removal rate was highest when pH value was 5. Of cyanide removed in the primary treatment, the largest part was removed through the precipitation of ferric ferrocyanide: $[Fe_4(Fe(CN)_6]_3$, and the rest was precipitated and removed through the production of $Cu_2[Fe(CN)_6]$, $Ni_2[Fe(CN)_6]$, CuCN, etc. Furthermore, it appeared more effective in removing residual cyanide in wastewater to mix $Na_2SO_3$ and $Na_2S_2O_5$ at an optimal ratio and put the mixture than to put them separately, and the optimal weight ratio of $Na_2SO_3$ to $Na_2S_2O_5$ was 1:2, at which the oxidative decomposition of residual cyanide was the most active. However, further research is required on the simultaneous removal of heavy metals such as chrome and zinc.

• Journal of Applied Biological Chemistry
• /
• v.54 no.3
• /
• pp.214-217
• /
• 2011

Fumigant, methyl bromide which is used in most countries for plant quarantine, has been designated and under control as ozone depleting substance. For developing alternative chemicals for methyl bromide, many countries have been intensifying their capacity. This study was carried out to investigate the residue patterns of hydrogen cyanide which is commonly used for plant quarantine. Hydrogen cyanide was treated onto the orange, banana, and pineapple at recommended and double doses and then sampling was done at 1 and 3 day after fumigation treatment. Residue of hydrogen cyanide was found safe because average residue levels on orange, banana, and pineapple after 3 days of fumigation treatment were $0.57{\pm}0.05$, $0.21{\pm}0.17$, and $0.41{\pm}0.08$ ppm, which were lower than the MRLs of Korea (5 ppm), Japan (5 ppm), USA (50 ppm), and Canada (25 ppm). Hydrogen cyanide are expected to be used as alternative chemicals for methyl bromide fumigant for orange, banana, and pineapple.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.6
• /
• pp.1287-1291
• /
• 2009

The genes of cyanide hydratase(CHT), a kind of nitrilases whichhydrolyze cyanide to formamide were extracted from N. crassa and A. nidulans, the two fungal strains. The recombinant forms of the CHT originated from N. crassa and A. nidulans were prepared with N-terminal hexahistidine purificationtags or no tags, and expressed in E. coli. The enzymes were purified using immobilized metal affinity chromatography. They were compared according to their pH activity profiles, and kinetic parameters. The N. crassa CHT has the wider pH range of activity above 50% and three-fold higher turnover rate (6.6 ${\times}$ $10^8$ $min^{-1}$) than the A. nidulans, meanwhile the CHT of A. nidulans has the higher $K_m$ value. Expression of CHT in both N. crassa and A. nidulans were induced by the presence of KCN, regardless of any presence of nitrogen sources. Max. 82% of KCN was degraded in 60 min for biological degradation tests.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.29 no.3
• /
• pp.336-342
• /
• 2019

Introduction: An unexpected death was reported in a beginner immediately after starting the work at a plating factory. After the incident, air sampling was performed using a simulation of the situation as it had been at the time. Methods: To evaluate the airborne concentration of hydrogen cyanide, a total of six samples were collected: one personal sample, three area samples, and two background samples (office and outdoors). Hydrogen cyanide measurement was performed according to the standard sampling protocol recommended by the U.S. NIOSH (National Institute of Occupational Safety and Health). Results: The highest concentration of hydrogen cyanide was 0.938 ppm measured in a sample collected from the plating bath area with local exhaust ventilation. This value was approximately 20% of the ceiling occupational exposure limit. The personal sample showed a concentration of 0.135 ppm. Samples collected near the bath in which the incident occurred and a dehydrator showed hydrogen cyanide concentrations of 0.236 ppm and 0.101 ppm, respectively. Hydrogen cyanide was not detected in the background samples (office and outdoors). Conclusions: It is necessary to use proper ventilation systems and respirators in plating factories to prevent acute poisoning. Furthermore, it is important to educate and train new workers dealing with toxic substances.

• Bulletin of the Korean Chemical Society
• /
• v.23 no.10
• /
• pp.1490-1492
• /
• 2002

• Economic and Environmental Geology
• /
• v.44 no.6
• /
• pp.485-492
• /
• 2011

Sorption of cyanide on granular activated carbon and attenuation of the cyanide by UV-light over a wide range of conditions such as pH and concentration were investigated through batch experiments. Cyanide uptake by activated carbon is much effective at $[CN]_{ini}$ < 2 mg/L. The sorption of cyanide on activated carbon at pH 7.0 is greater than that of pH 9.0. It is found that the ratio of CN uptake to CN in solution increases at pH 9.0 whereas at pH 7.0 the ratio decreases, suggesting that reactivity of activated carbon increases as a function of pH. The sorption of cyanide rapidly increases during the first 30 min, followed by sharp desorption until 3hr, and then the sorption increases and reaches the maximum sorption during the duration of experiments, implying that the sorption mode could be changed through conformational change during the initial stage of the cyanide uptake by activated carbon. Total amount of cyanide desorbed from the activated carbon during the period of desorption experiments is less than 1.5% of total sorbed cyanide, indicative of strong and stable sorption of cyanide on the activated carbon. The sorption with mixture of activated carbon and Ham-Baek sludge shows less effective on the removal of the cyanide. It is noted that UV-light is much effective on the removal of cyanide but also the attenuation is achieved until $[CN]_{tot}$ is up to 10 mg/L. Our findings demonstrate that both activated carbon and UV-light are very effective on the attenuation of cyanide over a wide range of environmental conditions.

• Journal of the Mineralogical Society of Korea
• /
• v.27 no.4
• /
• pp.223-233
• /
• 2014

Cyanidation method has been used to extract high-purity gold and silver in mining industry. Such mining activities have used a large amount of cyanide, and the mine wastewater contained a high level of cyanide has brought about pollution of surrounding aqueous environments. This research was initiated to study $TiO_2$-catalytic UV-LED photo-oxidation to remove cyanide from the mine wastewater. UV lamp has been generally used as a light source in conventional photo-oxidation so far, but it shows numerous drawbacks. For this reason, this study focused on the evaluation of applicability of UV-LED as an alternative light source in cyanide photo-oxidation process. Three types of $TiO_2$ photo-catalyst were compared in terms of performance of photo-oxidation of cyanide, and the results show that Degussa P25 was the most efficient. In addition, four types of UV-LED were tested to compare their efficiencies of cyanide photo-oxidation, and their efficacy was increased in the order of 365 nm lamp-type > 365 nm can-type > 280 nm can-type > 420 nm lamp-type. Not only did this study demonstrate that UV-LED can be used in the photo-oxidation of cyanide as an alternative light source of UV lamp, but also confirmed that the performance of photo-oxidation was significantly influenced by the type of $TiO_2$ catalysts.