• FLOWER RESEARCH JOURNAL
• /
• v.18 no.1
• /
• pp.33-37
• /
• 2010

Effects of cutting time of double flowered Hydragea serrata for. acuminata native to Korea on flowering and growth of following year were investigated in order to develop as a pot plant. Cuttings were carried out every 10th day from April to September in 2008. The cuttings were directly placed in 15 cm diameter pots. Longest plant was obtained from May cuttings and their average heights were 31.7 cm, and followed by April and July cuttings. Plant heights of August and September cuttings were 23.6 cm and 22.0 cm, respectively. In contrast, growth and height of June cutting were abnormally small. Leaf length, leaf width and petiole length of August and September cutting were reduced, but numbers of leaves were not changed. Average flower cluster numbers of May cuttings were 4 flower clusters, and July, August and September cuttings were 3 clusters while only 1 flower cluster per a plant was obtained during June. Biggest diameter of flower crown was observed from May cuttings and the size was 10.3 cm diameter; however, smaller flower crown size was observed after July cuttings. The best overall flower appearance was observed from May cuttings, and the worst was June cuttings. Even though plant height of August and September cuttings were reduced, flowering aspect and ornamental value were normal, but blooming times were retarded according to late cutting time.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.5 no.1
• /
• pp.22-32
• /
• 1985

Optimum pasture management during the summer season is an important factor to maintain good regrowth and persistence of pasture in Korea. This experiment was carried out to investigate the effects of the cutting management on the dead plant, weed appearance, regrowth and carbohydrate reserves in stubble, and dry matter yield of tall fescue dominated pasture during the mid summer season. For the test, a split plot design with 4 replications was treated with 2 different the third cutting times (July 12 and Aug. 4) as the mainplots, and 3 different cutting heights (3, 6 and 9 cm) at the third cut as the subplots, and the experiment was done at the experimental field of the Livestock Experiment Station, in Suweon, 1984. The results obtained are summarized as follows: 1. Considering the meteorological conditions during the experimental period, the temperature was a little higher by $2^{\circ}C$ than that of average year, especially the first and second decade of August were high. And the precipitation of 1984 tended to be low when compared with the average year. 2. Temperature of soil surface and underground tended to increase by $1-3^{\circ}C$ as the stubble height was low during the summer season. 3. Regrowth leaf length and leaf area after the third cut increased significantly with the high cutting height at the third cut. 4. A significant higher total nonstructural carbohydrate (TNC) content in stubble after the third cut was observed in the high stubble cut on July 12. The results indicate that the high stubble height reserves more carbohydrates for early regrowth stage after the third cut when compared with the low stubble. On Aug. 4, however, the recovery of TNC contents after the third cut was not effective due to high temperature and rainfall. 5. The percentage of dead plant after the third cut was found to be high with the low cutting height during the mid summer season (p<0.05). 6. With the low stubble height on July 12 cut, it was appeared that the percentage of weed was significantly increased (p<0.05), and main weeds appeared after the third cut were Echinochloa crusgalli>Digitaria sanguinalis>Cyperus iria>Rumex crispus, and so on. In case of cut on Aug. 4, weed appearance was no difference at three cutting heights. 7. Dry matter yield at the third cut was increased in the plot of cutting on Aug. 4 and stubble height (p<0.05). However, yields at the fourth and fifth cut were increased with high stubble height (p<0.05), regardless of harvest time. 8. In total dry matter yield after the third cut, there was no significant difference between the cutting time and forage yield. However, total yield on July 12 was increased with the high stubble height (p<0.05). 9. From the above results, it is suggested that the 9 cm cutting height during the mid summer season is the most effective for good regrowth, weed control and forage yield of tall fescue dominated pasture.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.14 no.1
• /
• pp.50-56
• /
• 1994

This study was investigated for the purposes of securing forage resource using idled rice paddy recently increased in accordance to a current trend of farm products' liberalization and also of presevation of environment by using cattle sluny as liquid manure, which is seriously increasing these days. In this study, mean annual dry matter yield and its seasonal variation with reed canarygrass, and a optimum rate of cattle sluny application were investigated. The results are as follows: 1. According to the conditions of cutting frequencies(3, 4 and 5 cutting per year), mean annual dry matter yield was recorded from 8.9 tons to 10.9 tons per hectare and was the highest at 3 cutting frequency. 2. The use of cattle sluny with the levels of between 300 and 360 kg N per hectare showed a significantly higher mean annual dry matter yield than that of the control (non-fertilization). 3. The treatments with 3 and 4 cutting frequencies(90 kg Nhdyear, 120 kg Nhdyear) recorded higher dry matter yields than the control of the former level by 1.23 tons and 2.34 tons respectively and in the treatment of 5 cutting frequency, the second level with cattle sluny of 300 kg Nhdyear showed an increased dry matter yield of 2.11 tons compared to the former level(l50 kg Nhdyear). With regards to nitrogen efficiency, one kg of nitrogen is applied to 13.7, 19.4 and 14.1 kg of dry matter yields in the conditions of 3, 4 and 5 cutting frequencies respectively. 4. In view of seasonal variance of annual dry matter yield, the second cut in 3 cutting frequency, the third cut in 4 cutting frequency and the third in 5 cutting frequency showed the highest ratio as 42, 37 and 32% respectively compared to the total. 5. Under the conditions of this study, the 'Input-Output curve' from 5 cutting frequency was the closest to sigmaformed process(i=0.9993) of various cutting frequencies, and the maximum marginal yield in the treatment was obtained at the level of 250 kg Nha with cattle sluny. The economic level of cattle sluny was between 371.0 and 402.2 kg N and the highest dry matter yield was obtained at 489.3 kg Mdyear in the same treatment

• Proceedings of the Korean Geotechical Society Conference
• /
• 2005.03a
• /
• pp.846-853
• /
• 2005

The whole death by disaster is totalized to 1,515 person from 1993 to 2004 year in our country. In this section life damages by landslide is totalized 357 people(about 24% of whole life damage). About 36 people are died by landslide(such as cutting area failure every year). Kangwon-do need a lot of interests and prevention because dangerous area that landslide occurrence is more than other area at summer localized downpour or thawing season and there is landslide occurrence possibility area more than other area. Kangwon-do area is higher than other area in natural disaster incidence and damage scale because topography and a lot of rainfalls by summer localized in Kangwon-Do than other area. In this study, dangerous area of landslide occurrence possibility is analyzed and compared Kangwon-Do with other areas in our country. as a result, every year we have experienced landslide occurrence and natural disaster. accordingly, we urgently need to prevent landslide occurrence and natural disaster by analy-zed source about landslide occurrence and condition of disaster in Kangwon-Do and suitable engineering method and construction work.

• Korean Journal of Agricultural Science
• /
• v.33 no.2
• /
• pp.97-106
• /
• 2006

To strengthen the competitiveness of agricultural sector of the Korea, the direction of market trends on agriculture of the Malaysia was reviewed. The most dominating agricultural area in value is palm oil products, and forest products, sea products poultry products and rubber products is in order. The cultivated area of highest two top plants, oil palm and rubber, was about 4.4 million hectares in 2005, but it is decreasing year by year. Comparatively, rice field, pine apple and fruits tree cultivating area is increasing in tendency by the year. Among all the agricultural products, those items such as pork meat, poultry, egg were self-sufficient, rice, fruits, vegetables and sea products were about 70 to 80% self-sufficient, and beef meat, goat meat and milk were below 20% self-sufficient. Most of the grains, such as wheat, rice, barley, corn etc. and their processed food were imported. Also, temperate fruits such as apple, pear, and water cultivated as well as sprouting vegetables are imported. Ornamental products as cutting flowers and orchids are exported to mainly to the Singapore, but high quality temperate fruits and vegetables are imported from Australia. Oil palm exportation covers the balance of the other items imported and obtaining the foreign money as well in Malaysia.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.24 no.2
• /
• pp.145-154
• /
• 2004

The objective of this experiment was to suggest the optimum cutting height for turf type mixtures{Kentucky bluegrass(Newport) 40％ + tall fescue(Rebell Jr) 20％ + perennial ryegrass (Palmer Ⅱ) 10% + redtop(Barricuda) 10％ + red fescue(Salem) 10% + creeping bentgrass(Crenshaw) IO%}. The fields trials were conducted from 1998 to 2001 at Chungnam National University in order to evaluate the dry matter yield and quality on the cutting heights(3, 4, and 5cm). With increasing the cutting height, the average DM yields of turf type mixtures over 3-year significantly increased, therefore the average total DM yields were obtained 11,158, 12,143 and 13,181㎏/ha at cutting height 3, 4 and 5cm(p<0.05), respectively. The CP content and OMO decreased(p<0.05), whereas the fiber contents slightly increased with increasing the cutting height. The average CPDM and DDM yields were obtained 2,012 and 8,621㎏, 2,097 and 9,461㎏, and 2,298 and 9,951㎏ at cutting height 3, 4, and 5㎝(p<0.05), respectively. The botanical compositions of Kentucky bluegrass and tall fescue were maintained high as 30 ∼ 36％, but that of perennial ryegrass was maintained low as 10-15%. Most of other species were low, but redtop and creeping bentgrass among the other species made up 8∼10％ and 7 ∼ 8% of botanical composition at the last 6th cutting time in 2001, respectively. In general, the level of cutting height of turf type mixtures was not more closely associated with botanical composition. The results of this experiment indicated that a 5㎝ of cutting height of turf type mixtures sown by extensive method would seemed adequate.

• Asian Journal of Turfgrass Science
• /
• v.4 no.2
• /
• pp.133-144
• /
• 1990

This experiment was carried out to study the effect of pure nitrogen fertilization on botanical composition of grassland in 1987~ 1988 under practical conditions at the " Federal Institute for Agriculture in the Alps" in Austria. The application rates were 0, 30, 60, 90 and 120kg/ha/cut, the cutting regimes 3-, 4 , 5- and 6-cuts/year. The results were as follows: 1. Only PK fertilization resulted in higher botanical composition of Trifolium repens among legumes in grassland, which was increased by cutting frequency .2. Nitrogen fertilization on three-cut areas resulted in higher existence of generally valuable tall grasses such as Arrhenotherum elatius Trisetum flavescens and Dactylis glomerata . On the other hand, nitrogen fertilization on four-, five- and six-cut areas showed mainly Doctylis glomerato and Poa pratensis appearance. 3.For some cases, appearance of less valuable grasses, herbs and weeds such as Agropyron repens, Poa trivialis, Poa annua, Setoria viridis, Aegopodium podagra rio, Men landrium rubrum, Taraxacum officlnale, Achillea millefolium, Rorippa sylvestris and Polygonum ocleulare was *Bundesanstalt fur alpenlandische Landwirtschaft Gumpenstein(A-8952 Irdning, 6sterreich) increased on medium and high rates of N fertilized areas. 4.Reduction of sward density may also diminish the advantages of nitrogen fertilization and may be threatened by mainly high dressings of nitrogen combined with too late utilization of the sward. 5.Location altered the efficiency of nitrogen fertilization on botanical composition.mposition.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2021.05a
• /
• pp.271-272
• /
• 2021

The maintenance and repair work of sidewalk block pavement is a construction that requires a large amount of budget to be invested every year. It is important to establish an appropriate standards for estimating construction cost to ensure proper budgeting and quality. In this study, the standards for estimating the cost of maintenance and construction work for sidewalk blocks that can be applied to the construction volume classified according to the site conditions, construction type, and equipment use differentiated from new construction was established. As a result, the daily construction volume was presented by reflecting excavator and truck as equipment in the combination of paver and common worker. The re-installation was applied by separating the construction volume of sections with general blocks and induction/raised blocks based on the installation of sidewalk blocks after demolition. Generally if block cutting is necessary, the precision construction conditions using a cutting machine were taken into consideration to secure the construction quality. In addition, it has been revised to apply classified construction volume into A and B-Type depending on the park and site conditions.

• Korean Journal of Medicinal Crop Science
• /
• v.4 no.3
• /
• pp.265-268
• /
• 1996

According to the research of the cultivation result of Gardenia for 5 years to investigate its cultivation conditions and problems, the development of the variety with early mature and high yielding is urgent and that of rooted cutting cultivation method by the experiment of rooted cutting, bed soil, growth regulator and cutting period are pressing. The development of cultivation method with planting year, planting density, supplementary period and amounts of supplementary of Gardenia planted on growing field are required and for the disease and insect pest control, the research of the cultivation method with disease and insect pest resistance is ne­eded by auxotrophic fertilizing and organic agricultural method, not by agriltural chemicals.

• Journal of the Korean Wood Science and Technology
• /
• v.33 no.3 s.131
• /
• pp.1-10
• /
• 2005

Tree-ring chronologies can be used to date historical buildings or furnitures by matching them with chronologies of living trees. Tree-ring dating gives a calendar year to each tree ring and produces the cutting dates of logs or woods. In this study, we intend to extend our tree-ring dating applications to Korean furnitures. As a case study, we examined two traditional furnitures, one cabinet 'Jang' and the other chest, 'Bandaji'. The cutting date of the cabinet woods was A.D. 1839. The date of the outmost ring in the chest was A.D. 1904. Due to no bark present, the cutting date of the chest was only estimated as $1930{\pm}10$ by 'sapwood rings' estimation method. Ring-width pattern of the latter one also indicated that the origin of the chest must be Kangwon province. This case study suggests that tree-ring dating would be a useful and accurate method to identify the critical dates for the chronicles of Korean traditional furnitures.