• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.22 no.3_1spc
• /
• pp.489-495
• /
• 2013

This study analyzed thevariation in the cutting force when the cutting area of a terrace volume is machined, which is generally left after the rough cutting of a sculptured surface. The numerically simulated results for the cutting forces are compared with cutting force measurements by considering the theoretical prediction of the cutting area formation and specific cutting volume. The variation in the cutting force is measured using a dynamometer installed on a machining center for 19 different kinds of test pieces, which are selected according to the variation in the terrace volume factor, tool diameter factor, and cutting depth factor. As a result, it is verified that the cutting forces evaluated by the numerical analysis coincide with the measured cutting forces, and it is proposed as a practical cutting force prediction model.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.19 no.5
• /
• pp.219-225
• /
• 2024

In this study, an algorithm was developed to measure the volume of meat products passing through the conveyor line of a portion cutter using a stereo vision sensor and calculate the cutting position to cut them into the same weight unit. Previously, three or more laser profile sensors were used for this purpose. However, in this study, the volume was measured using four stereo vision sensors, and the accuracy of the developed algorithm was verified to confirm the applicability of the technique. The technique consists of stereo correction, scanning and outlier removal, and cutting position calculation procedures. The comparison between the volume measured using the developed algorithm and the results measured using an accurate 3D scanner confirmed an accuracy of 91%. Additionally, in the case of 50g target weight, where the cutting position calculation is crucial, the cutting position was calculated at a speed of about 2.98 seconds, further confirming the applicability of the developed technique.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.19 no.1
• /
• pp.114-120
• /
• 2010

Optimization of the turning process has been concentrated on the selection of the optimal cutting parameters, such as cutting speed, feed rate and depth of cut. However, optimization of the cutting parameters does not necessarily guarantee the maximum profit. For the maximization of the profit, parameters other than cutting parameters have to be taken care of. In this study, 8 price-related parameters were considered to maximize the profit of the product. Regression equations obtained from RSM technique to relate the cutting parameters and maximum cutting volume with a given insert were used. The experiments with four combinations of cutting inserts and material were executed to compare the results that made the profit and cutting volume maximized. The results showed that the cutting parameters for volume and profit maximization were totally different. Contrary to our intuition, global optimization was achieved when the number of inserts change was larger than those for volume maximization. It is attributed to the faster cutting velocity, which decreases processing time and increasing the number of tool used and the total tool changing time.

• Journal of Korean Society for Geospatial Information Science
• /
• v.17 no.2
• /
• pp.11-17
• /
• 2009

Terrestrial LiDAR can measure high capacity 3D-topography coordinates and try to apply to various public works such as tunnel surveying, facility deformation surveying. This experiment is about how to calculate ground cutting volume because the stage of the earth work spend lots of money and time among civil engineering works. Surveying cutting area using Terrestrial LiDAR and then calculating cutting area in planned area comparing sectional plan before construction and planned section and LiDAR data. Also, the values of the calculating ground cutting volume by three different resolution LiDAR has are compared and analyzed.

• Journal of Surface Science and Engineering
• /
• v.43 no.1
• /
• pp.41-45
• /
• 2010

The effect of $MoS_2$ and graphite content on wear resistance and mechanical properties of Cu/Sn bonded diamond micro blades was comparatively investigated in terms of volume and weight fraction. For the evaluation of endurance and cutting performance, instantaneous electric power consumption and cumulative wear loss during cutting glass work piece at constant velocity were measured with the micro blades of the wide range of lubricant content. The energy consumption of blades for glass cutting decreased with the content of lubricants. Wear amount of blade in volume increased with the amount of lubricant addition. It was found to be relevant to the decrease in flexural strength and hardness with the amount of lubricants. With the same amount of lubricant content in volume fraction $MoS_2$ showed superiority in mechanical properties and cutting performance than graphite while graphite could result in stronger effect on lowering electric consumption during cutting work piece for the same weight percent fraction than $MoS_2$ because of lower density.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.22 no.3
• /
• pp.294-299
• /
• 2012

This paper suggests a modeling technique for shape and volume prediction of fishes to cut them with identical weights for group meals. The measurement and prediction of frozen fishes for group meals are very difficult because they have a bending deformation occurring at frozen stage and a hollow by eliminating the internals. Besides there exist twinkles problem of surface caused by freeze and variable weights by moisture conditions. Therefore a complex estimation algorithm is necessary to predict the shape and volume prediction of fishes exactly. Hollow prediction, pattern classification and modeling for tails using neural network, integration based volume prediction algorithm are suggested and combined to solve those problems. In order to validate the proposed method, the experiments of 3-dimensional measurement, volume prediction and fish cutting for spanish mackerel, saury, and mackerel are executed. The cutting experiments for real fish are executed.

• Transactions of Materials Processing
• /
• v.15 no.9 s.90
• /
• pp.654-659
• /
• 2006

In this paper, the real shapes of micro tool deflection were observed. In micro endmilling process, micro tool deflection generates very serious problems in contrast to macro tool deflection. For analyzing the micro tool deflection, the trend of micro tool deflection was observed using real captured images in this paper. To get the real images of micro tool deflection, micro slot cutting processes were executed under cutting volume using micro endmill($Dia.\;200{\mu}m$) and real images of tool deflection were obtained during cutting processing by high-speed camera. Finally, the extent of tool deflection was calculated by the deflection angle according to cutting volume.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.18 no.1
• /
• pp.53-64
• /
• 1994

Rouge cutting process takes the major portion of machining operation using NC milling machine. Especially, most of the machining time is spent in this process when molds are machined. Therefore, an efficient algorithm for generating the tool path for rough cutting is suggested in this paper. The first step of the procedure is getting the volume to be machined by applying the Boolean operation on the finished model and the workpiece which have been modeling system. Basic principle of determining machining procedure is that a large tool should be used at the portion of the simple shape while a small tool should be used at the complex portion. This principle is realized by representing the volume to be machined by an octree, which is basically a set of hexahedrons, and matching the proper tools with the given octants. When the tools are matched with the octants, the tool path can be derived at the same time.

• Journal of Korean Society of Forest Science
• /
• v.81 no.2
• /
• pp.146-155
• /
• 1992

The natural mixed stand in Jindong-Ri, according to a recent study, showed the possibility of selection cutting as a silvicultural system based on the stand structure such as DBH distribution and height distribution. However, volume structure per DBH class of this stand had not a mature stand of selection cutting. In this study, wherefore, the rate of increment for DBH and volume was used to predict the future stand structure including volume distribution per DBH class. The possibility of selection cutting was then discussed using the future stand structure. From the prediction of future stand structure for 30 years per every 10 years, it could be concluded that the stand will be induced to selection cutting forest because of enough number of trees in objective DBH class and above, total volume per hectare, and the volume of large DBH class which can be harvested every year. However, this stand still did not show the structure of typical selection cutting which has the rate of 1 : 2 : 7 in the number of trees per hectare and the volume rate of 5 : 3 : 2 for large, medium, and small DBH class. This problem could be improved by appropriate silvicultural treatments.

• Nuclear Engineering and Technology
• /
• v.54 no.3
• /
• pp.1145-1151
• /
• 2022

A hybrid cutting using both plasma and end mill was developed for safe and efficient dismantling of nuclear facilities. In this cutting method, a moving arc plasma heats up the workpiece before milling. Thermally softened part of the workpiece is then removed quickly and deeply with an end mill. For the cutting experiments, a three-axis numerical control (NC) milling machine was combined with a commercialized arc plasma torch and used to cut 25 mm thick stainless steel plates. Experimental results revealed that pre-heating by arc plasmas can improve the cutting volume per unit time higher than 40% by reducing the cutting load and increasing the cuttable depth when using an end mill without cutting fluids. These advantages of a hybrid cutting process are expected to contribute to quick and safe segmentations of metal structures with radioactively contaminated inner surfaces.