일품등 9품종을 대상으로 경북 남부 평야지역 봄 가뭄 대응 벼 품종별 재배안정성을 평가하기 위해 분얼초기 인위적으로 수분 부족 스트레스를 유도한 결과는 다음과 같다. 1. 일품등 9품종 대상으로 수분 부족 스트레스에 따른 결과는 평균적으로 관행대비 출수기는 약10일 빠르고 쌀수량은 약 18.6% 감소, 담백질 함량은 20.2% 증가, 식미치는 8.3% 감소하였다. 2. 본 연구에서 수량에 가장 영향을 미치는 인자는 2차 지경 분화기에 가장 영향을 받는 영화수와 천립중으로 나타났다. 3. 잎마름이 50%에 도달할때까지 소요일수가 가장 긴 품종은 새누리, 가장 짧은 품종은 대보였다. 4. 재관개 후에도 대보와 삼광은 수량감소가 가장 컸을뿐 아니라 FV/FM 관행 초기값으로 회복하지 못하여 가뭄의 광생리학적 지표의 가능성을 확인하였다. 따라서 경북 남부 평야지역에서는 봄 가뭄 대응 내건성 벼 품종은 새누리와 하이아미가 가장 적합하고 내건성이 약한 품종들은 재관개 후에도 광합성 효율이 낮아 수량감소로 이어져 이러한 결과에 따라 관행대비 쌀 수량감소율과 단백질 함량이 낮고 식미치가 높은 품종으로 새누리, 하이아미가 내건성 적합품종으로 선발되었다.
본(本) 시험(試驗)은 주요북방형(主要北方型) 목초(牧草)에 있어서 기상환경(氣象環境)과 예취방법(刈取方法)이 비구조성(非構造性) 탄수화물(炭水化物)의 합성(合成) 및 축적형태(蓄積形態)에 미치는 영향(影響)을 구명(究明)코자 한국(韓國)의 Suweon, Cheju 및 Taekwalyong과 서독(西獨)의 Freising 및 Braunschweig에서 $1975{\sim}'79$년간(年間) 실시(實施)되었다. 공시초종(供試草種)은 orchardgrass, perennial ryegrass 및 meadow fescue를, 예취관리(刈取管理)는 방목기(放牧期)(년(年) $6{\sim}7$회(回)), silage 기(期)(년(年)$4{\sim}5$ 회(回)) 및 건초기이용(乾草期利用)(년(年) 3 회(回))으로 구분(區分) 분할구배치법(分割區配置法) 4반복(反復)으로 시험(試驗)을 실시(實施)하였는바 그 결과(結果)를 요약(要約)하면 다음과 같다. 1. 북방형(北方型) 목초(牧草)에 있어서 비구조성탄수화물(非構造性炭水化物)의 합성(合成) 및 축적형태(蓄積形態)는 초종(草種) 및 재배지역(栽培地域)에 따라 차이(差異)가 크다. 초종별(草種別) total nonstructural carbohydrates (TNC) 함량(含量) meadow fescue가 8.01%로 가장 높았으며 다음은 perennial ryegrass 6.08% 및 orchardgrass 4.39%의 순(順)이었다. 이같은 결과(結果)는 서독지방(西獨地方)의 TNC 함량(含量) 12.73%(meadow fescue), 18.02%(perennial ryegrass) 및 10.42% (orchardgrass) 보다 낮은 수준(水準)으로 지역간(地域間)에 현저(顯著)한 차이(差異)가 있었다. 2. Orchardgrass의 비구조성(非構造性) 탄수화물(炭水化物) 함량은 fructosan .34%, mono- 및 disaccharose 3.04%로 mono- 및 disaccharose 형태(形態)로 다량(多量) 축적(蓄積)되는데 반(反)해 perennial ryegrass에서는 fructosan 3.25%, mono- 및 disaccharose 2.83%로 fructosan 함량(含量)이 약간(若干) 높은 편이었다. Meadow fescue 식물(植物)의 축적형태별(蓄積形態別) 함량(含量)은 각각(各各) fructosan 3.93%, mono- 및 disaccharose 4.08%이었다. 3. 비구조성(非構造性) 탄수화물(炭水化物)의 합성(合成) 및 축적(蓄積)은 환경온도(環境溫度)가 상승됨에 따라 감소(減少)되었다($P{\leqq}0.1%$). 이같은 원인(原因)으로 우리나라에 있어서의 계절별(季節別) mono- 및 disaccharose와 fructosan 함량(含量)은 봄철의 2.69% 및 1.34%에서 고온건조(高溫乾燥)한 여름철에는 각각(各各) 1.28% (mono- 및 disaccharose) 및 0.34% (fructosan)로 감소(減少)되었다. 그러나 여름철 기온(氣溫)이 낮은 Freising 및 Braunschweig에서는 계절간(季節間) 탄수화물(炭水化物)의 함량변화(含量變化)가 한국(韓國)에서와 같이 뚜렷하게 나타나지 않았다. 4. 비구조성(非構造性) 탄수화물(炭水化物)의 합성(合成) 및 축적(蓄積)은 목초(牧草)의 잦은 예취(刈取)에서 크게 감소(減少)되었다. 이와같은 원인(原因)으로 여름철 고온기간중(高溫期間中) 잦은 예취이용(刈取利用)은 식물체내(植物體內)의 TNC 함량(含量)을 감소(減少)시켜 예취후(刈取後)의 재생력(再生力)이 크게 약화(弱化)된다. 그러나 기온(氣溫)이 낮은 조건(條件)에서는 예취관리(刈取管理)에 따른 비구조성(非構造性) 탄수화물(炭水化物)의 함량변화(含量變化)가 크게 나타나지 않았다.
본 연구는 시설재배에서 참외를 수확할 수 있는 로봇의 엔드이펙터를 개발하기 위한 전단계로서, 참외의 엔드이펙트 중에서 소프트 핸드링이 가능한 그립퍼와 참외줄기를 절단하는 커터를 설계하기 위해 참외의 기하학, 압축, 절단, 마찰 특성 등을 분석하였다. 그 결과 참외의 길이는 평균 108mm, 직경은 중간지점에서 평균 70mm, 중량은 평균 188g, 부피는 평균 333mL, 진원도는 평균 3.8mm로 나타났다. 참외의 중량(W)에 대하여 길이(L)와 직경(D2)을 변수로 하는 식 $W=L^a{\times}D_2^b$로부터 비선형 회귀분석을 실시한 결과 a는 2.0279, b는 -0.9998의 상수값을 가지는 상관관계가 있는 것으로 나타났다. 참외줄기의 지름은 평균 3.8mm이며, 참외 줄기는 중심으로부터 반경 5mm 범위 내에서 대부분 분포하였다. 참외의 항복치와 압축강도, 경도의 평균값은 각각 $36.5N/cm^2$, $185.7N/cm^2$, $636.7N/cm^2$이며, 참외 줄기의 절단력과 절단강도는 각각 $2.87{\times}10^{-2}N$와 $5.60N/cm^2$로 나타났다. 참외의 마찰계수는 고무가 0.609으로 가장 높게 나타났고, 그 다음으로 알루미늄이 0.393, 스테인레스강이 0.177, 테프론이 0.079로 나타났다. 분석된 자료를 토대로 엔드이펙터 설계시 동작에 따른 위치 오차와 안전율을 감안하여, 그립퍼의 및 커터의 크기, 선회반경, 설치위치, 구동모터의 동력, 재료 및 재질의 선정 등에 적용할 수 있을 것으로 판단되었다.
한반도 동부 울진 죽변-부구 지역 맥암과 단열의 기하와 운동학적 특성 그리고 횡절관계를 파악하고, 맥암의 암석기재와 지화학을 분석하였다. 총 144 암맥과 370개 절리의 방향성과 횡절관계를 이용하여 암맥은 세 개의 염기성 암맥군(M-10, M-80, M-100)과 한 개의 산성 암맥군(AD)으로 구분하고 절리는 네 개의 절리군(J-10, J-40, J-80, J-150)으로 분류하였다. 또한 J-150 절리들 중 최후기에 우수향으로 재활된 것들을 F-340R로 분류하였다. 암석기재, 지화학 그리고 산상을 종합하면, M-80과 M-100은 동일한 마그마와 응력장 하에서 각각 기존 단열과 마그마압력에 의해 새로이 만들어진 수압파쇄단열을 통로로 주입되었다. 또한 연구지역 암맥과 단열군은 ${\rightarrow}$${\rightarrow}$${\rightarrow}$${\rightarrow}$${\rightarrow}$ 순서로 형성되었다. 그리고 M-80과 M-100은 $N10^{\circ}E$ 그리고 M-10은 북서-남동의 최소수평응력장에서 지각이 신장된 결과이다. 한편 기존 절대연령 연구결과와 종합하여 분석하면, 이번 연구에서 확인된 암맥과 단열군들 중 M-80, M-10 그리고 F-340R은 64-52 Ma, 에오세~올리고세 그리고 마이오세에 각각 만들어진 것으로 해석된다.
본 연구에서는 대규모 절개사면에서 억지말뚝의 효과를 확인하고, 사면과 억지말뚝의 거동을 조사하였다. 먼저, 사면의 절토공사시 경사계를 이용하여 사면지반의 거동을 조사하였다. 계측결과 사면지반의 수평변위는 점차적으로 증가하고, 사면활동면의 발생위치에서 급격히 감소하는 것으로 나타났다. 이를 통하여 사면활동깊이의 예측이 가능하였다. 사면활동면의 예측을 통하여 억지말뚝의 설계와 시공이 수행되었다. 그리고 억지말뚝으로 보강된 절개사면에 대하여 각종 계측시스템을 적용하여 억지말뚝의 거동을 조사하였다. 계측결과 억지말뚝의 수평변위는 켄틸레버보의 변형형상과 유사하게 발생되었으며, 말뚝두부의 철근콘크리트보의 설치로 인하여 두부의 수평변위 억제효과를 확인할 수 있다. 억지말뚝의 최대휨응력이 발생되는 깊이는 대상지반의 상부토사층이 존재하는 깊이와 유사한 것으로 나타났다. 또한, 쏘일네일링 시공을 위한 억지말뚝 전면부 사면굴착시 억지말뚝의 수평변위가 증가함을 알 수 있다. 본 연구를 통하여 대규모 절개사면에 대하여 억지말뚝의 적용성 및 효과를 확인할 수 있다.
현대 제조 공업이 고효율, 고정밀도와 경제적인 방향으로 발전 하면서 금속을 절단하는 띠톱 기계는 이미 철강, 기계, 자동차, 조선, 석유, 광산, 항공 우주 등 다양한 영역에서 광범위 하게 활용 되고 있다. 하지만 기존의 띠톱 기계들은 경험적으로 설계 되어져 왔으며 따라서 낮은 수명, 톱질 동작 상태에서 낮은 정밀도 및 저효율을 문제와 높은 제조원가 문제를 가지고 있다. 본 논문에서는 띠톱의 역학적 해석을 통해 띠톱 톱대의 설계 파라미터를 개선하는 방법을 제시 하였다. 실제로 빈번하게 사용 되고 있는 띠톱 기계를 모델링 하여 응력 분석, 피로해석을 시행 하였으며 이에 따라 톱대의 상세한 설계 파라미터를 도출 하였다. 그 결과 피로 강도가 피로 요구 사항을 만족 시키고 띠톱 기계의 정밀도와 효율이 크게 향상 되는 것을 확인할 수 있었다.
본 연구의 목적은 생체 신호 측정 압력 및 인장 직물 센서의 전극을 자수 공정을 이용하여 제작할 때 전도사의 필요 물성을 파악하는 것이다. 스마트 웨어러블 제품의 전극을 전도사를 이용한 자수 공정을 통해 전극 및 회로 등을 제작하면 불필요한 재료 손실이 없고 복잡한 전극 모양이나 회로 디자인을 컴퓨터 자수기를 이용하여 추가 공정 없이 제작할 수 있다. 하지만 보통의 전도사는 자수 공정 내의 부하를 못 이기고 사절 현상이 발생하기에 본 연구에서는 silver coated multifilament yarn 3종류의 기계적 물성인 S-S curve, 두께, 꼬임 구조 등을 분석하고 동시에 자수기의 실의 부하를 측정하여 자수 공정 내 전도사의 필요 물성을 분석하였다. 실제 샘플 제작에서 S-S curve의 측정 결과가 가장 낮은 silver coated polyamide/polyester가 아닌 silver coated multifilament의 사절이 발생하였으며 그 차이는 실의 꼬임 구조와 사절이 일어난 부분을 관찰한 결과 수직으로 반복적인 부하가 일어나는 자수 공정에서 꼬임이 풀리면서 사절이 일어나는 것을 알 수 있었다. 추가적으로 압저항 압력/인장 센서를 제작하여 생체 신호 측정용 지표인 gauge factor를 측정하였으며 스마트 웨어러블 제품의 대량 생산화에 중요한 부분인 자수 전극 제작으로의 적용 가능성을 확인하였다.
Though people occupationally exposed to machineries and automation in the industrialized society desire work involving decreased strength, due to the continuous and repetitive activities, a new industrial stress is present. Studies on prevalence of musculoskeletal disease and their related risk factors have evolved. In this study in relation to work tasks, we investigated the differences in musculoskeletal symptoms occurring In each body region. The results of the survey were as follows. 1. When comparing age, level of education, work duration, job satisfaction and leisure time activities according to work task, age in control group was $38.83{\pm}5.5$, in comparison to the other 2 groups was smaller(p<0.05), and level of education in control group was higher (p<0.05). Work duration in the cutting department was $8.04{\pm}4.99$ years longer than the other 2 groups (p<0.05), but there was no difference in the job satisfaction and leisure time activities. 2. The mean of symptom scores of each work task was 1.54 in the cutting department, 1.57 in the press department and 1.59 in the control group, and there was no significant differnce in the 3 groups. The mean of symptom scores for upper extremities in the control group was low but no statistically significant diffrence was shown. 3. When comparing the mean of symptom score according to work task in the each body region, in the shoulder region, the symptom score in the press department which desired strength was higher than the other 2 groups but no significant difference was shown. In the wrist region the cutting department scored 1.01 and in comparison to the other 2 groups was significantly increased (p<0.05). 4. The results of the univariate regression analysis on the major individual risk factors associated with musculoskeletal symptom relating work showed that previous symptom complaints in the same body region was significant risk factor(p<0.001) in the whole body Besides wrist, hip, and knee, psychological problem was shown to be a significant factor(p<0.05). And the body regions which work task was significant risk factor were wrist and neck region (p<0.05). 5. The results of the multiple regression analysis involving significant factors of each body region from the univariate regression analysis showed that previous symptom complaint in whole body region(p<0.001) and psychological problem in the shoulder, elbow and lumbar region (p<0.05) were significant factors, and work task was significant factor in the wrist (p<0.05).
Electrical resistance strain gauges, brittle-coatings, Moir'e fringe analysis, photoelasticity methods, etc, have been employed in the study of stress analysis and three-dimensional photoelasticity method used in this experiment. The author fabricated a total of 24 samples of maxillary and mandibular edentulous ridges with normal and sharp shapes using epoxy resin, one of the photoelastic materials. In addition, complete denture made from artificial resin teeth in other twoo sizes, large and medium size, were affixed to the specimens and attached to an articulator. The following results were attained by cutting 9 slice specimens into 6mm thick portions, in accordance with the three dimensional photoelastic stress freezing method, to analyze stress distribution status under specific static loading in the central, lateral and protrusive occlusions of the shape of edentulous ridge. 1. In the case of central occlusion, when complete resin artificial teeth in large and medium sizes were used on normal and sharp alveolar ridges, high stress distribution was broadly shown in the labio-buccal sides, and low and concentrated in the lingual sides, in all cases. Generally, the highest stresses were shown at the top of the alveolus, or at 2mm below the top of the alveolus, particularly in the specimen 2, 3, and stresses were more or less the same in the symmetrical right and left sides. 2. In the case of lateral occlusion, when the same load was applied, high stresses were shown broadly at the working sides in both the labio-buccal and lingual sides, and low and concentrated at the balanced sides. The highest stresses were shown in the top of the alveolus on the working sides in specimen 2 portion, and the lowest stresses at the balanced sides in specimen 6, slightly higher stresses were shown at retromolar parts in the balanced sides. 3. In the case of protrusive occlusion, high stresses were broadly shown at the labio-buccal sides, and slightly higher stresses at the top 2, 4, and 6mm parts of the alveolus with concentration. The highest stresses were shown in specimen No. 5 and the lowes stresses in specimen 1, 9 and stresses were more of less the same at the symmetrical right and left sides.
During the last few decades in Korea, the development of hillside or mountain areas has rapidly increased for infrastructure construction such as railroads, highways and housing. Many landslides have occurred during these constructions. Also, the amount and scale of damage caused by landslides have increased every year. In the case of Far East Asia including Korea, the damage of landslides is consequently reported during the wet season. In this paper, the effect of stabilizing piles on slope stability is checked and the behavior of slope soil and piles are observed throughout the year by field measurements in the large-scale cut slopes. In particular a large-scale cut slope situated on the construction site for the express highway in Donghae, Korea. First of all, The behavior of the slope soil was measured by inclinometers during slope modification. Landslides occurred in this area due to the soil cutting for slope modification. The horizontal deformations of slope soil gradually increased and rapidly decreased at depth of sliding surface indicating that the depth of sliding surface below the ground surface can be predicted. On the basis of being able to predict the depth of the sliding surface, stabilizing piles were designed and constructed in this slope. To ensure the stability of the reinforced slope using stabilizing piles, an instrumentation system was installed. The maximum deflection of piles is measured at the pile head and it is noted that the piles deform like deflection on a cantilever beam. The maximum bending stress of piles is measured at the soil layer. The pile above the soil layer is subjected to lateral earth pressure due to driving force of the slope, while pile below soil layer is subjected to subgrade reaction against pile deflection. As a result of research, the effect and applicability of stabilizing piles in large-scale cut slopes could be confirmed sufficiently.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.