• 한국지반환경공학회 논문집
• /
• 제6권2호
• /
• pp.15-20
• /
• 2005

도로 주변 절토사면 상부에 시공되는 산마루 측구는 상부로부터 흘러내리는 지표수를 원활히 배수시켜 절개면으로 유입되는 것을 방지한다. 국내의 경우 전 국토의 70%이상이 산악지로 구성되어 있어 도로 개설에 따른 절개면의 발생은 필연적이다. 여름 집중호우와 간극수압의 증가로 인하여 절개면의 불안정성은 증가된다. 그러나 절토사면 상부에 시공되어 있는 산마루측구는 품질관리의 어려움과 배수능력 부족 등의 문제점들이 있다. 따라서, 본 논문에서는 산마루 측구의 깊이와 투수계수에 따른 절토사면의 안전율 변화를 분석하였으며 적절한 측구 설치깊이를 결정하였다.

• 공학기술논문지
• /
• 제11권4호
• /
• pp.227-235
• /
• 2018

Studies on the laser cutting processing characteristics of magnesium alloys can be divided into three parts, comparing the cutting faces of magnesium alloy and aluminum alloy, observing the shape of the corner where straight lines meet, and observing the straight lines and arcs. First, there were no laser cutting conditions for magnesium alloys, so it was observed to cut magnesium alloy and aluminum alloy under the same processing conditions as aluminum alloy to shape and surface of the cut surface. Next, to observe the characteristics of the corner, we observed the shape of the corner according to the angle change of the part where the two lines meet, and finally we observed various angles to observe the characteristics of the part where the arc meets the line. Finally, laser cutting processing characteristics of magnesium alloys and aluminum alloys obtained based on the above study contents were summarized.

• 한국전산구조공학회논문집
• /
• 제17권4호
• /
• pp.365-374
• /
• 2004

강구조물에 있어서 여러 가지 환경요인에 의해 균열 및 부식 등의 문제가 발생되고 있다. 이는 구조물의 내구성을 저하시키는 요인이 된다. 이와 같은 문제를 해결하기 위해 용접 보수${\cdot}$보강방법을 사용할 수 있다. 이러한 보수용접은 전단 및 용접과 같은 입열 과정을 필연적으로 수반하고 있다. 따라서 이러한 입열과정에 있어서 발생되는 잔류응력 및 변형의 예측${\cdot}$제어${\cdot}$방지는 구조물의 안전이라는 측면에서 볼 때 중요하다고 할 수 있다. 본 연구에서는 2차원 및 3차원 유한요소 해석을 수행하여 가스전단 및 아크용접에 의해 얻어진 절단 및 용접 잔류응력과 변형을 구하였으며, 2차원 및 3차원 해석기법에 따른 그 값의 정도를 명확히 하였다. 해석기법에 따라 2차원 및 3차원 해석을 수행하여 얻은 절단 및 용접 잔류응련의 분포 및 그 절대치는 유사한 값을 나타내었다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 ITC-CSCC -1
• /
• pp.168-171
• /
• 2002

For laser-cutting rapid prototyping systems that fabricate objects with layers having a certain degree of thickness, it is necessary both to minimize surface distortion and to generate dynamically feasible laser cutting trajectories. An effective tangential layer cutting algorithm is developed for this requirements. An energy function is defined in terms of tangential line lengths and their distances. And the energy is minimized for the tangential lines to closely describe a layer suffice. Our method is applied to 3D model samples and the generated tangential lines effectively approximate layer surface and make laser trajectory smooth.

• 한국공작기계학회논문집
• /
• 제15권1호
• /
• pp.32-38
• /
• 2006

The magnetic fluid polishing technique can polish the tool of complex shape, because the polishing method which polishes as compress the workpiece by the magnetism abrasives to arrange to the linear according to the line of magnetic force. Therefore, we producted the magnetic fluid polishing device in order that mirror like finishing processes the tool surface. In order to a polishing condition selection, polishing characteristic was estimated by polishing conditions which are magnetic flux density, polishing speed, grain size, magnetic fluid. The tool was polished to the selected polishing condition. The result to evaluate the polished tool's performance with the cutting force and tool wear, the polished tool's performance was improved compared with the tool not to polish.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1993년도 추계학술대회 논문집
• /
• pp.321-327
• /
• 1993

In order to maintain the cutting force at a desired level during peripheral end milling processes in spite of variation of the depth of cut and other machining conditions, a feedrate override. Apaptive Control Constraint (ACC) system are developed. Feedrate override was accomplished by a developed MMC board and PMC interface techniques. Nonlinear model of the cutting process was linearized as an adaptive model with time varying paramrters. Integral type estimators were introduced for on-line identification of cutting and control parameters in peripheral and milling processes. Zero Order Jold (ZOH) type degital control methodology which uses pole-placement concepts was applied for the ACC system. Performance of the developed ACC system was confirmed on the vertical machining center equipped with FANUC OMC for a large amount of experiment

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 추계학술대회 논문집
• /
• pp.963-966
• /
• 2000

Abrasive jet machining(AJM) process is similar to the sand blasting, and effectively removes hard and brittle materials. AJM has applied to rough working such as deburring and rough finishing. As the needs for machining of ceramics, semiconductor, electronic devices and LCD are increasing, micro AJM was developed, and became the inevitable technique to micromachining. This paper describes the performance of the micro AJM in micro groove cutting of glass. Diameter of hole and width of line in this groove cutting is 80${\mu}{\textrm}{m}$. Experimental results showed good performance in micro groove cutting in glass, but the size of machined groove was increased about 2~4${\mu}{\textrm}{m}$. therefore, this micro AJM could be effectively applied to the micro machining of semiconductor, electronic devices and LCD parts.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1992년도 추계학술대회 논문집
• /
• pp.344-348
• /
• 1992

This paper presents a new methodology for on-line tool breakage detection by sensor fusion concept of an acoustic-emission (AE) sensor. A built-in piezoelectric force sensor was used to measure cutting force instead of a tool dynamometer to preserve the machine tool dynamics. he sensor was inserted in the tool turret housing of an NC lathe. FEM analysis was carried out to locate the most sensitive position for the sensor. When a tool is broken, the explicit changes of signals' pattern take place. A burst-type AE signal increases abruptly. Followingly, a cutting force drops significantly. Therefore a burst of AE signal is used as a triggering signal to inspect the following cutting force. Significant drop of cutting force is utilized to detect tool breakage. The algorithm was implemented in a DSP board for in-process tool breakage detection. The proposed monitoring system was capable of a good applicable tool breakage detection.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 춘계학술대회 논문집
• /
• pp.806-812
• /
• 2008

Many kinds of rolling-stocks that have various control methods are being operated by Seoulmetro which is a history of a city railroad rolling-stock. Seoulmetro is being faced with a wheel management comparing of other lines with a perpendicular wear of wheel and a side damage, and so on, by operating several cars at a loop line. This is causing maintenance expenses increase and deteriorating a fusibility of rolling-stock, for it has an effect on a rolling-stock using. A cutting pattern of wheel and a wear form affect the expected span of a wheel. A wheel cutting cause is classifed into cutting for reprofiling of a flange wear of wheel and for removing every kind defect which originates from wheel wear. In this study, Seoulmetro exhibit a stable rolling-stock use method and a reasonable management method of wheel, analysing wheel exchange condition and cutting management of wheel.

• 한국정밀공학회지
• /
• 제12권3호
• /
• pp.130-143
• /
• 1995

This paper presents a new methodology for on-line tool breadage detection by sensor fusion of an acoustic emission (AE) sensor and a built-in force sensor. A built-in piezoelectric force sensor, instead of a tool dynamometer, was used to measure the cutting force without altering the machine tool dynamics. The sensor was inserted in the tool turret housing of an NC lathe. FEM analysis was carried out to locate the most sensitive position for the sensor. A burst of AE signal was used as a triggering signal to inspect the cutting force. A sighificant drop of cutting force was utilized to detect tool breakage. The algorithm was implemented on a DSP board for in-process tool breakage detection. Experiental works showed an excellent monitoring capability of the proposed tool breakage detection system.