Transactions of the Korean Society of Machine Tool Engineers (한국공작기계학회논문집)

The Korean Society of Manufacturing Technology Engineers (한국생산제조학회)
권호 표지

A Study on the Improvement of Performance for High Speed Cutting Tool using Magnetic Fluid Polishing Technique

자기연마기술을 이용한 고속절삭공구의 성능향상에 관한 연구

  • Published : 2006.02.01
Download PDF
⟨ Previous Next ⟩

Abstract

The magnetic fluid polishing technique can polish the tool of complex shape, because the polishing method which polishes as compress the workpiece by the magnetism abrasives to arrange to the linear according to the line of magnetic force. Therefore, we producted the magnetic fluid polishing device in order that mirror like finishing processes the tool surface. In order to a polishing condition selection, polishing characteristic was estimated by polishing conditions which are magnetic flux density, polishing speed, grain size, magnetic fluid. The tool was polished to the selected polishing condition. The result to evaluate the polished tool's performance with the cutting force and tool wear, the polished tool's performance was improved compared with the tool not to polish.

Keywords

References

  1. Ko, S. L., Lee, S. K. and Bae, S. M., 2001, 'Study on the Design of End Mill Geometry,' Journal of Korean Society of Precision Engineering, Vol. 18, No. 8, pp. 24-31
  2. Kim, H. G., S, J. T., Gweon, D. H., Kim, J. S. and Kang, M. C., 2001, 'Machinability Evaluation of Endmill Tool through Development of Ultra-fineGrain Grade Cemented Tungsten Carbide Material,' Autumn Conference on KSPE, pp. 865-869
  3. Patricia, L. S., 1999, 'A new finishing process significantly lengthens the life of cutting tools and other wear products,' American Machinist, pp. 70-74, November
  4. Hideki, K., Kazuhiro, T., Yunhai, S., Yoshio, T., Kazutaka, M. and Takao, Y., 1999, 'Study on Polishing Characteristics of Simply Mixed Oil Bonded Magnetic Abrasives,' Transactions of JSME, Vol. 65, No. 632, pp. 386-393
  5. Toyohisa, Y., Noritsugu, U., Koji, K., Matsuo, A. and Kazuo, W., 1992, 'Magnetic Fluid Grinding for Innersurface of Pipe of Which Cross-sectional Shape is Hexagonal Circle,' Transactions of JSME, Vol. 58, No. 553, pp. 173-178
  6. Takeo, S. and Hitomi, Y., 1993, 'Study on a New Internal Finishing Process by Applying Magnetic Abrasive Machining(Internal Finishing of Stainless Steel Tubings and Clean Gas Bombs),' Transactions of JSME, Vol. 59, No. 560, pp. 293-299
  7. Hitomi, Y. and Takeo, S., 1994, 'Study on a New Internal Finishing Process by Applying Magnetic Abrasive Machining(2nd Report, Effects of Magnetic Field Distribution on Magnetic Force Acting on Magnetic Abrasives),' Transactions of JSME, Vol. 60, No. 578, pp. 307-313
  8. Park, S. R., Cho, J. R., Park, M. G., Yang, S. C. and Jung, Y. G., 2005, 'A Study on the Improvement of High Speed Cutting Tool using Magnetic Fluid Grinding Technique,' Spring Conference on KSPE, pp. 1289-1293
  9. Cho, J. R., Yang, S. C. and Jung, Y. G., 2005, 'A Study on the Improvement of High Speed Cutting Tool using Magnetic Fluid Grinding Technique(A Performance Estimation of High Speed Cutting Tool),' Autumn Conference on KSPE, pp. 354-361
  10. Kordonski, W. I. and Golini, D., 1999, 'Fundamentals of Magnetorheological Fluid Utilization in High Precision Finishing,' Journal of IMSS, Vol. 10, pp. 683-689