• Journal of the Korean Society for Precision Engineering
• /
• v.12 no.9
• /
• pp.126-136
• /
• 1995

Copper magnetron anode of a microsave-over consists of an cylindrical outer-tube and various inner-vanes. The magnetron anode is produced by the complex processes; vane blanking, pipe cutting and silver-alloy brazing of vanes. Recently, the backward extrusion process for forming vanes has been developed to avoid the complex procedures. The developed process is analyzed by using upper-bound elemental technique (UBET). In the UBET analysis, the upper-bound load, the configuration and the vane-height of final extruded product are determined by minimizing the roral power consumption with repect to chosen parameters. To verify theoretical analysis, experiments have been carried out with pure plasticine billets at room temperature, using different web-thickness and number of vanes. The theoretical predictions both for forming load and vane-height are in reasonable agreement with the experimental results.

• Tribology and Lubricants
• /
• v.11 no.5
• /
• pp.66-70
• /
• 1995

In this investigation, a controlled-environment tribological test device has been used to study the friction coefficients of several grades of commercially-available coated and uncoated cemented carbide cutting tools in a dry air environment at different environmental chamber pressures. Tests were run in the block-on-ring configuration. The results suggest that the friction coefficient is sensitive to the level of air present, with a noticeable rise in friction coefficient with decreasing pressure or increasing vacuum level. The uncoated cemented carbide sufaces resulted in the highest friction values, whereas the coated grades yielded somewhat lower values even after the coating was removed. The results suggest the importance of friction control in the design of coatings for metal removal processes.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1995.04b
• /
• pp.204-208
• /
• 1995

Copper magnetron anode of a microwave-oven consists of an cylindrical outer-tube and various inner-vanes. The magnetron anode is produced by the complex process ; vane blanking, pipe cutting and sliver-alloy brazing of vanes. Recently, the backward extrusion process for forming vanes has been developed to avoid the complex procedures. The developed process is analyzed by using upper-bound elemental technique(UBET). In the UBET analysis, the upper-bound load, the configuration and the vane-height of final extruded product are determined by minimizing the total power consumption with respect to chosen parameters. To verify theoretical analysis, experiments have been carried out with pure plasticine billets at room temperature, using different web-thickness and number of vanes. The theoretical predictions both for forming load and vane-height are in reasonable agreement with the experimental results.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2011.10a
• /
• pp.58-59
• /
• 2011

Microstrip line on dielectric substrate depending on the type of its configuration can be applied to be antenna, communication filters, and resonators. When driving frequency is considered more than X-band, unnecessary signal leakage should be occurred because of flowing through the planar circuit at banding position. So leakage signal will affect other planar circuit, and then EMC problem has to be introduced. In this paper, the affection of banding planar circuit on dielectric substrate was investigated.

• Journal of the Korean Society for Precision Engineering
• /
• v.13 no.8
• /
• pp.164-174
• /
• 1996

As tools for machining precision componants, end mills and ball end mills are widely used. For the end mills have longer cylindrical shape comparing dianeter, they are liable to deflect when machining and induce geometrical error and deterioration of surface roughness. To improve the stiffness and the sharpness of the cutting edge of end mill, a software for manufacturing end mills are developed. The program predicts the result of helical flute grinding and the configuration of cuting edge which is located in cylindrical surface. Furthermore to facilitate the manufacturing end mills using CNC grinding machine, the setting condition which satisfy the geometrical requirements like tool rake angle and stiffness are obtained.

• Physical Therapy Korea
• /
• v.12 no.4
• /
• pp.33-40
• /
• 2005

The purpose of this study was to define more precisely the anatomy of the thumb flexor pulley system and to determine the relative contribution of each of the pulleys to the biomechanics of thumb motion at the metacarpophalangeal (MP) and interphalangeal (IP) joints. For this, 22 hands from 11 cadavers were used and randomly assigned to two groups. In the first group, the first annular (A1) pulley was cut first followed by the variable annular (Av) pulley and then the oblique pulley. In the second group, the oblique pulley was cut first followed by the, pulley and then the Av pulley. In 7 of 22 hands, it was a transverse structure parallel to the, pulley with a gap between the A1 and Av pulleys, referred to here as type I. In 9 hands, the A1 and Av pulleys were connected without any gap (type II). In 6 hands, the space between the A1 and Av pulleys were triangular in shape with fibers of the Av pulley converging toward the radial side (type III). In biomechanical study of both first and second experiments, there was no significant difference in MCP joint flexion between the all intact, A1 section, A1/Av section, A2 intact (A1/Av/oblique section), and no pulley configuration (p>.05). In occurring displacements less than 10 mm, there was no significant difference in IP joint flexion (p>.05). However, there was a significant decrease in IP joint flexion occurred in both 15 mm and 20 mm excursion (p<.05), when the oblique pulley was resected additionally after cutting the A1 and Av pulleys in first experiment, and when the A1 pulley was resected additionally after cutting the oblique pulley. According to the results, the injury of only the oblique pulley does not decrease thumb motion significantly. The oblique pulley injury with both the A1 and Av pulleys laceration decreased thumb motion significantly. The additional laceration of the A2 pulley does not decrease thumb motion.

• Asian Pacific Journal of Cancer Prevention
• /
• v.16 no.3
• /
• pp.1129-1133
• /
• 2015

Background: The tissue microarray (TMA) is widely accepted as a fast and cost-effective research tool for in situ tissue analysis in modern pathology. However, the current automated and manual TMA techniques have some drawbacks restricting their productivity. Our study aimed to introduce an improved manual tissue miniarray (TmA) technique that is simple and readily applicable to a broad range of tissue samples. Materials and Methods: In this study, a conventional TV/radio telescopic antenna was used to punch tissue cores manually from donor paraffin embedded tissue blocks which were pre-incubated at $40^{\circ}C$. The cores were manually transferred, organized and attached to a standard block mould, and filled with liquid paraffin to construct TmA blocks without any use of recipient paraffin blocks. Results: By using a conventional TV/radio antenna, it was possible to construct TmA paraffin blocks with variable formats of array size and number ($2-mm{\times}42$, $2.5-mm{\times}30$, $3-mm{\times}24$, $4-mm{\times}20$ and $5-mm{\times}12$ cores). Up to $2-mm{\times}84$ cores could be mounted and stained on a standard microscopic slide by cutting two sections from two different blocks and mounting them beside each other. The technique was simple and caused minimal damage to the donor blocks. H&E and immunostained slides showed well-defined tissue morphology and array configuration. Conclusions: This technique is easy to reproduce, quick, inexpensive and creates uniform blocks with abundant tissues without specialized equipment. It was found to improve the stability of the cores within the paraffin block and facilitated no losses during cutting and immunostaining.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.29 no.4 s.235
• /
• pp.534-539
• /
• 2005

Nodal displacements are referred to the initial configuration in the total Lagrangian formulation and to the last converged configuration in the updated Lagrangian furmulation. This research proposes a relative nodal displacement method to represent the position and orientation for a node in truss structures. Since the proposed method measures the relative nodal displacements relative to its adjacent nodal reference frame, they are still small for a truss structure undergoing large deformations for the small size elements. As a consequence, element formulations developed under the small deformation assumption are still valid for structures undergoing large deformations, which significantly simplifies the equations of equilibrium. A structural system is represented by a graph to systematically develop the governing equations of equilibrium for general systems. A node and an element are represented by a node and an edge in graph representation, respectively. Closed loops are opened to form a spanning tree by cutting edges. Two computational sequences are defined in the graph representation. One is the forward path sequence that is used to recover the Cartesian nodal displacements from relative nodal displacement sand traverses a graph from the base node towards the terminal nodes. The other is the backward path sequence that is used to recover the nodal forces in the relative coordinate system from the known nodal forces in the absolute coordinate system and traverses from the terminal nodes towards the base node. One open loop and one closed loop structure undergoing large deformations are analyzed to demonstrate the efficiency and validity of the proposed method.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2005.11a
• /
• pp.788-791
• /
• 2005

Nodal displacements are referred to the Initial configuration in the total Lagrangian formulation and to the last converged configuration in the updated Lagrangian formulation. This research proposes a relative nodal displacement method to represent the position and orientation for a node in truss structures. Since the proposed method measures the relative nodal displacements relative to its adjacent nodal reference frame, they are still small for a truss structure undergoing large deformations for the small size elements. As a consequence, element formulations developed under the small deformation assumption are still valid fer structures undergoing large deformations, which significantly simplifies the equations of equilibrium. A structural system is represented by a graph to systematically develop the governing equations of equilibrium for general systems. A node and an element are represented by a node and an edge in graph representation, respectively. Closed loops are opened to form a spanning tree by cutting edges. Two computational sequences are defined in the graph representation. One is the forward path sequence that is used to recover the Cartesian nodal displacements from relative nodal displacements and traverses a graph from the base node towards the terminal nodes. The other is the backward path sequence that is used to recover the nodal forces in the relative coordinate system from the known nodal forces in the absolute coordinate system and traverses from the terminal nodes towards the base node. One closed loop structure undergoing large deformations is analyzed to demonstrate the efficiency and validity of the proposed method.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.20 no.4
• /
• pp.95-104
• /
• 2018

This study classified the figurative features of the raglan sleeves presented in the Spring and Summer Collections and Fall and Winter Collections abroad in 2010 and 2018 and analyzed the production methods and patterns of the classified raglan sleeves. The analysis results are described below. The raglan sleeves in the latest fashion trends were classified into Type H, Type A, Type O and Type Y per shape. The production features of raglan sleeves in the latest fashion trends included the cutting lines in various shapes, a flounce that made shoulders look wider, and decorations such as gathers, studs, punching, slits, pleats and tucks. The raglan sleeve design was classified into Yoke Raglan, Armhole Princess Raglan, Semi Raglan, Gathered Raglan, Pleats Raglan, Cowl Raglan, Origami Raglan, Circular Curved Raglan, Capes Raglan and Constructive Design Raglan and the patterns per design were presented. For creative and experimental clothing by the analysis of the features of raglan sleeve structure, a variety of configuration methods need to be developed and implemented. The analysis results of this study will contribute to the development of the fashion industry through small quantity batch production pursuing unique styles as the basis for further study on the configuration methods of raglan sleeves. This study will be used in various ways as education materials on sleeve patterns in the educational field. Through the analysis of sleeve patterns, this study tries to provide basic data for planning the design of raglan sleeves and helping to diversify the ladies' apparel market in the future.