• International Journal of Advanced Culture Technology
• /
• 제10권4호
• /
• pp.219-225
• /
• 2022

In November 1983, Deng Sanmu's wife, Zhang Jianquan, donated a large number of Deng Sanmu's original seal carving stones and seal cutting scores to the Heilongjiang Provincial Museum in China. Therefore, the Heilongjiang Provincial Museum of China is the richest and most authoritative place to collect Deng Sanmu's original seal cutting stones and seal carving scores. According to the fieldwork, the original seal cutting stones and the seal cutting score donated by Deng Sanmu's wife, Zhang Jianquan, include Deng Sanmu's seal cutting inscriptions made between 1922 and 1963. In addition, Deng Sanmu's own life and career in the art are documented in detail in his markings, so the seal cutting inscriptions of Deng Sanmu in the collection of the Heilongjiang Provincial Museum of China are quite representative. We paper is a documentary review and study of the seal inscriptions of Deng Sanmu in the collection of the Heilongjiang Provincial Museum in China. For the accuracy and richness of this study, a total of 89 representative seals in the collection are used as primary sources to study Deng Sanmu's seal cutting emulation method. The specific content is centered on ancient seals, Qin seals, and Han seals, from which the lineage of Deng Sanmu's emulation methods of seal cutting is further clarified.

• 생물환경조절학회지
• /
• 제30권4호
• /
• pp.257-262
• /
• 2021

유인 방법은 딸기 묘를 생산하는 전통적인 방법이다. 그러나 딸기 묘를 유인하여 번식하는 방법은 오랜 노동시간이 있어야 하는 노동 집약적인 방법이다. 삽목 방법은 상대적으로 유인 방법에 비해 노동 기간과 작업 시간이 짧으므로 유인의 효과적인 대안으로 주목되어왔다. 이 연구는 유인과 삽목 사이의 노동 기간, 작업 시간 및 묘의 생육을 조사하기 위해 수행되었다. '매향' 딸기는 두 개 동의 딸기 육묘용 유인 온실과 삽목 온실에서 각각 재배되었다. 유인 방법(유인 작업, 모주 제거, 자묘 간 분리) 및 삽목 방법(삽수 채묘, 저장 전 처리, 삽목 작업)에 대한 주요 작업 시간을 측정했으며, 유인은 158일 동안 6개의 작업이 필요하며, 삽목은 113일 동안 4개의 작업이 필요했다. 유인은 삽목보다 작업 시간이 더 많이 필요했다. 유인과 삽목묘 육묘 방법에 따른 유의적인 차이가 없었다. 이러한 결과는 묘소질의 손실 없이 육묘 동안 유인 방법보다 삽목 방법이 더 많은 노동 기간과 작업 시간을 절약할 수 있음을 의미한다.

• 한국지역사회생활과학회지
• /
• 제17권1호
• /
• pp.101-108
• /
• 2006

This study was conducted to develop the regulating methods for the optimal harvest stage of new sprout for woody plants, and to clarify the effects of storage condition and period on the growth of new sprout formed of Aralia elata cv. 'Jeongkwang'. Japanese angelica tree were collected in the Jangheung district of Jeonnam on 20. March, 2005, and those cut branches were stored at $5{\pm}2^{\circ}C$ and 80 to 90% of the relative humidity, and were cut in water. Survival rate of cut branches for Aralia elata cv. 'Jeongkwang' was significantly increased when that was used for the cutting after the collection with no storage. And those survival rate was much more increased when that was stored at 80 to 90% of relative humidity than 40 to 50% of relative humidity. Number of new sprouts formed which were not stored immediately after the collection 3.2 to 3.4, and that were stored at cold storage room before cutting and cut on 1. June and 1. August were 5.1 to 5.3. Leaf growth of cut branches cut in water on 20. March started at ten days after cutting, and that on 1. June and 1. August at one to two days after cutting. Slow and mature sprout growth of Aralia elata cv. 'Jeongkwang' which were cut in water were different by the cold storage periods. Nineteen days were needed for the mature growth of sprout when cut in water on 20. March, and thirteen days on 1. August.

• 대한기계학회논문집
• /
• 제18권7호
• /
• pp.1643-1653
• /
• 1994

To facilitate the manufacturing of dull using CNC grinding machine, the simulation of helical groove machining with given wheel profile and setting condition is necessary. Considering the wheel as a collection of thin disks, the flute configuration is predicted in a cross section perpendicular to the axis and the grinding wheel profile is also predicted to machine the desired helical groove with given setting conditions. Two programs for these processes are developed. Using programs interactively, the helical groove machining process can be predicted more accurately. By clarifying the geometrical relation between the shape of cutting edge and the flute configuration in the cross section which is perpendicular to drill axis, it becomes possible to predict the necessary cross sectional shape of wheel for desired drill cutting edge shape. Some factors for the software are considered concerning prediction of accuracy and computing time.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2008년도 춘계 학술논문 발표대회
• /
• pp.79-82
• /
• 2008

It has been reported that destruction test by core collection is the most reliable of the structural concrete strength in present building construction field. But it causes low efficiency by damage and cutting in structure due to the core collection. It also has some problems in repairing. Additionally in case of strength test with management specimen, different environment compared to the structure environment cause problems about estimation precise structure strength. Therefore, it is required to develop structure direct strength test that has test values and credibility above the ones obtained by core specimen collection strength test and seasonal specimen test to suggest a reasonable and practical management method of structural concrete.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2005년도 춘계학술대회 논문집
• /
• pp.48-53
• /
• 2005

The world, coming into the 21st century, is preparing a new revolution called a knowledge-based society after the industrial society. The interest of the world is concentrated on information technology, nano-technology and biotechnology. In particular, the nano-technology of which study was originally started from an alternative for overcoming semiconductor micro-technology. It can be applied to most industry subject such as electronics, information and communication, machinery, chemistry, bioengineering, energy, etc. They are emerging into the technology that can change civilization of human beings. Specially, ultra precision machining is quickly applied to nano-technology in the field of machinery. Lately, with rapid development of electronics industry and optic industry, there are needs for super precision finishing of various core parts required in such related apparatuses. This paper handles stability of a super precision micro cutting machine that is a core unit of such a super precision finisher, and analyzes the results depending on the hinge type and material change, using FEM analysis. By reviewing the stability, it is possible to achieve the effect of basic data collection for unit control and to reduce trials and errors in unit design and manufacturing.

• 한국잠사곤충학회지
• /
• 제21권1호
• /
• pp.15-20
• /
• 1979

전열온상하에서 상수의 고조삽목을 실시할 때 가장 적당한 $\beta$-indolylbutric acid (IBA) 처리농도, 삽수의 채취시기(삽목시기) 및 삽상토등을 구명하기 위해서 본 시험을 실시한 결과 다음과 같은 결과를 얻었다. 1. 삽수를 IBA용액에 5초간 침지할 경우 IBA 2,000~4,000 p.p.m.으로 처리한 것이 활착률이 높았고 발근수도 많았다. 2. 가장 적당한 IBA 용액의 처리심도는 삽수의 기부로 부터 2.5 cm가랑 이였다. 3. 12월부터 3월 사이에 삽수를 채취 삽본할 수 있으나 3월에 삽목한 것이 더욱 결과가 좋았다. 4. 전열온상에 사용하는 상토로서는 진주암토(perlite)가 가장 이상적이었다.

• 한국철도학회논문집
• /
• 제13권6호
• /
• pp.541-545
• /
• 2010

현대의 도시철도차량 시스템은 복잡하고 첨단화 되어 있으며, 상호 인터페이스 체계를 구축하고 있는 차량 유지보수시스템의 체계적인 종합관리가 필요하다. 본 연구는 무선 전송 장치를 이용하여 전동차 정보 자동 수집 장치를 도입 적용한 사례에 대한 분석 결과이다. 무선 전송 장치는 차량기지로 입고한 전동차 열차종합 제어장치에 수집된 각종 정보를 무선 통신으로 데이터를 전송함으로써 유지보수 비용절감과 데이터 전송의 신뢰성 향상 효과가 있으며 이러한 무선 전송 장치를 도입 적용하여 기존의 열차정보수집 방법을 개선한 운용 사례를 제시한다.

• International Journal of Internet, Broadcasting and Communication
• /
• 제13권4호
• /
• pp.121-128
• /
• 2021

In order to design a real time big data collection and analysis system of manufacturing data in a smart factory, it is important to establish an appropriate wired/wireless communication system and protocol. This paper introduces the latest communication protocol, OPC-UA (Open Platform Communication Unified Architecture) based client/server function, applied user interface technology to configure a network for real-time data collection through IoT Integration. Then, Database is designed in MES (Manufacturing Execution System) based on the analysis table that reflects the user's requirements among the data extracted from the new cutting process automation process, bush inner diameter indentation measurement system and tool monitoring/inspection system. In summary, big data analysis system introduced in this paper performs SPC (statistical Process Control) analysis and visualization analysis with interface of OPC-UA-based wired/wireless communication. Through AI learning modeling with XGBoost (eXtream Gradient Boosting) and LR (Linear Regression) algorithm, quality and visualization analysis is carried out the storage and connection to the cloud.

• Current Photovoltaic Research
• /
• 제11권1호
• /
• pp.34-37
• /
• 2023

Solar energy had become the main energy industry of renewable energy along with hydroelectric power generation. One of the technologies that contributed to the popularization of photovoltaic power and the decrease in the unit price of photovoltaic modules was the large-area solar cell. However, as the area increased, the light receiving area increased and the current value increased accordingly. Since power loss occurs when the current value was large, the number of busbar was increased to increase the current collection rate, and a technology to lower the current value through half-cutting was developed. The bus bar of the solar cell served as a passage through which the generated current was transmitted. This was because when the number of busbar decreases, the moving distance of electrons increased, so the amount of power generation decreases and when it increases, shadows occured. An important aspect of the electrode design was the optimal balance of these busbars and number of fingers. Therefore, in this study, the characteristics of the solar cell according to the number of front bus bars of the large-area solar cell were simulated using Griddler 2,5 pro. After selecting the number of busbar with the best characteristics, the difference was compared by varying the number of fingers and a better direction for the number of cutting was presented.