• International Journal of Advanced Culture Technology
• /
• v.10 no.4
• /
• pp.219-225
• /
• 2022

In November 1983, Deng Sanmu's wife, Zhang Jianquan, donated a large number of Deng Sanmu's original seal carving stones and seal cutting scores to the Heilongjiang Provincial Museum in China. Therefore, the Heilongjiang Provincial Museum of China is the richest and most authoritative place to collect Deng Sanmu's original seal cutting stones and seal carving scores. According to the fieldwork, the original seal cutting stones and the seal cutting score donated by Deng Sanmu's wife, Zhang Jianquan, include Deng Sanmu's seal cutting inscriptions made between 1922 and 1963. In addition, Deng Sanmu's own life and career in the art are documented in detail in his markings, so the seal cutting inscriptions of Deng Sanmu in the collection of the Heilongjiang Provincial Museum of China are quite representative. We paper is a documentary review and study of the seal inscriptions of Deng Sanmu in the collection of the Heilongjiang Provincial Museum in China. For the accuracy and richness of this study, a total of 89 representative seals in the collection are used as primary sources to study Deng Sanmu's seal cutting emulation method. The specific content is centered on ancient seals, Qin seals, and Han seals, from which the lineage of Deng Sanmu's emulation methods of seal cutting is further clarified.

• Journal of Bio-Environment Control
• /
• v.30 no.4
• /
• pp.257-262
• /
• 2021

The pinning method is the traditional method to produce strawberry transplants. But, cultivating the pinning transplant is a labor-intensive operation and needs a long labor period. The cutting method has been considered as an effective alternative to the pinning method, due to the relatively short labor period and works time. This study was conducted to investigate the labor period, work time, and growth between pinning and cutting methods for strawberry transplants. The 'Maehyang' strawberry was cultivated at each pinning and cutting strawberry greenhouses. The time for special works on pinning method (pinning work, elimination of mother plant, and division of daughter plant), and cutting method (cutting collection, pretreatment before storage, and cutting work) were measured. The pinning method needed 6 tasks (planting of mother plant, maintaining of mother plant, pinning work, maintaining of daughter plant, elimination of mother plant, and division of daughter plant) for 158 days, and cutting method needed 4 tasks (collection and storage of cutting, cutting work, misting, and maintaining of transplants) for 113 days to cultivate transplants for fruit. And pinning method needed more work time than the cutting method. There was no significant difference between the growth of pinning and cutting transplants. These results showed that the cutting method saved more labor period, work time than pinning during the nursery period without losing transplant quality.

• The Korean Journal of Community Living Science
• /
• v.17 no.1
• /
• pp.101-108
• /
• 2006

This study was conducted to develop the regulating methods for the optimal harvest stage of new sprout for woody plants, and to clarify the effects of storage condition and period on the growth of new sprout formed of Aralia elata cv. 'Jeongkwang'. Japanese angelica tree were collected in the Jangheung district of Jeonnam on 20. March, 2005, and those cut branches were stored at $5{\pm}2^{\circ}C$ and 80 to 90% of the relative humidity, and were cut in water. Survival rate of cut branches for Aralia elata cv. 'Jeongkwang' was significantly increased when that was used for the cutting after the collection with no storage. And those survival rate was much more increased when that was stored at 80 to 90% of relative humidity than 40 to 50% of relative humidity. Number of new sprouts formed which were not stored immediately after the collection 3.2 to 3.4, and that were stored at cold storage room before cutting and cut on 1. June and 1. August were 5.1 to 5.3. Leaf growth of cut branches cut in water on 20. March started at ten days after cutting, and that on 1. June and 1. August at one to two days after cutting. Slow and mature sprout growth of Aralia elata cv. 'Jeongkwang' which were cut in water were different by the cold storage periods. Nineteen days were needed for the mature growth of sprout when cut in water on 20. March, and thirteen days on 1. August.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.18 no.7
• /
• pp.1643-1653
• /
• 1994

To facilitate the manufacturing of dull using CNC grinding machine, the simulation of helical groove machining with given wheel profile and setting condition is necessary. Considering the wheel as a collection of thin disks, the flute configuration is predicted in a cross section perpendicular to the axis and the grinding wheel profile is also predicted to machine the desired helical groove with given setting conditions. Two programs for these processes are developed. Using programs interactively, the helical groove machining process can be predicted more accurately. By clarifying the geometrical relation between the shape of cutting edge and the flute configuration in the cross section which is perpendicular to drill axis, it becomes possible to predict the necessary cross sectional shape of wheel for desired drill cutting edge shape. Some factors for the software are considered concerning prediction of accuracy and computing time.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2008.05a
• /
• pp.79-82
• /
• 2008

It has been reported that destruction test by core collection is the most reliable of the structural concrete strength in present building construction field. But it causes low efficiency by damage and cutting in structure due to the core collection. It also has some problems in repairing. Additionally in case of strength test with management specimen, different environment compared to the structure environment cause problems about estimation precise structure strength. Therefore, it is required to develop structure direct strength test that has test values and credibility above the ones obtained by core specimen collection strength test and seasonal specimen test to suggest a reasonable and practical management method of structural concrete.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2005.05a
• /
• pp.48-53
• /
• 2005

The world, coming into the 21st century, is preparing a new revolution called a knowledge-based society after the industrial society. The interest of the world is concentrated on information technology, nano-technology and biotechnology. In particular, the nano-technology of which study was originally started from an alternative for overcoming semiconductor micro-technology. It can be applied to most industry subject such as electronics, information and communication, machinery, chemistry, bioengineering, energy, etc. They are emerging into the technology that can change civilization of human beings. Specially, ultra precision machining is quickly applied to nano-technology in the field of machinery. Lately, with rapid development of electronics industry and optic industry, there are needs for super precision finishing of various core parts required in such related apparatuses. This paper handles stability of a super precision micro cutting machine that is a core unit of such a super precision finisher, and analyzes the results depending on the hinge type and material change, using FEM analysis. By reviewing the stability, it is possible to achieve the effect of basic data collection for unit control and to reduce trials and errors in unit design and manufacturing.

• Journal of Sericultural and Entomological Science
• /
• v.21 no.1
• /
• pp.15-20
• /
• 1979

Optimum conditions for rooting of hardwood cuttings of two mulberry varieties have been determined with respect to the concentration of IBA applied to the base of cutting, dipping depth into IBA solution, season of cutting collection and rooting medium in the bottom heat bins. 1. Optimum range of IBA concentration was 2,000 p.p.m.∼4,000 p.p.m. in Sariasi and Ichinose. 2. Most optimum dipping depth of cutting was 2.5 cm from the base of cutting 3. Rooting occurred most readily during December and March. 4. Perlite was the best medium to produce hardwood cuttings in the bottom heat bins.

• Journal of the Korean Society for Railway
• /
• v.13 no.6
• /
• pp.541-545
• /
• 2010

Because contemporary rolling stock system is complex and highly advanced, and it builds mutual interface, it is necessary to manage maintenance of rolling stock systematically. This study present a case, which shows how to adopt and apply RTD(Remote Transmission Device) integrated to train information collection device. After the train service is complete and the train enters the main subway station, various kinds of information collected from TCMS(Train Control Monitoring System) is transmitted to train depot information collection device through RTD. This study suggests that RTD integrated to train information collection device helps build an effective rolling stock maintenance system by improving reliability of data transmission and cutting maintenance costs.

• International Journal of Internet, Broadcasting and Communication
• /
• v.13 no.4
• /
• pp.121-128
• /
• 2021

In order to design a real time big data collection and analysis system of manufacturing data in a smart factory, it is important to establish an appropriate wired/wireless communication system and protocol. This paper introduces the latest communication protocol, OPC-UA (Open Platform Communication Unified Architecture) based client/server function, applied user interface technology to configure a network for real-time data collection through IoT Integration. Then, Database is designed in MES (Manufacturing Execution System) based on the analysis table that reflects the user's requirements among the data extracted from the new cutting process automation process, bush inner diameter indentation measurement system and tool monitoring/inspection system. In summary, big data analysis system introduced in this paper performs SPC (statistical Process Control) analysis and visualization analysis with interface of OPC-UA-based wired/wireless communication. Through AI learning modeling with XGBoost (eXtream Gradient Boosting) and LR (Linear Regression) algorithm, quality and visualization analysis is carried out the storage and connection to the cloud.

• Current Photovoltaic Research
• /
• v.11 no.1
• /
• pp.34-37
• /
• 2023

Solar energy had become the main energy industry of renewable energy along with hydroelectric power generation. One of the technologies that contributed to the popularization of photovoltaic power and the decrease in the unit price of photovoltaic modules was the large-area solar cell. However, as the area increased, the light receiving area increased and the current value increased accordingly. Since power loss occurs when the current value was large, the number of busbar was increased to increase the current collection rate, and a technology to lower the current value through half-cutting was developed. The bus bar of the solar cell served as a passage through which the generated current was transmitted. This was because when the number of busbar decreases, the moving distance of electrons increased, so the amount of power generation decreases and when it increases, shadows occured. An important aspect of the electrode design was the optimal balance of these busbars and number of fingers. Therefore, in this study, the characteristics of the solar cell according to the number of front bus bars of the large-area solar cell were simulated using Griddler 2,5 pro. After selecting the number of busbar with the best characteristics, the difference was compared by varying the number of fingers and a better direction for the number of cutting was presented.