• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.36 no.9
• /
• pp.1087-1094
• /
• 2012

This study deals with structural analysis and testing under loading conditions calculated by computational fluid dynamics for a small composite blade that is utilized in a dual rotor wind turbine system. First, the aerodynamic forces were analyzed at the rated and cutout wind speed to identify the bending moment distribution along the blade length in previous research. Then, full-scale structural tests were conducted according to IEC 61400-2 to evaluate the structural integrity of the composite blade. These results were compared with finite element analysis to identify the accuracy of the structural analysis. Based on these results, it was revealed that the existing blade has a very high safety margin. Then, the layup of the composite blade was redesigned and analyzed using finite element analysis to achieve structural integrity and economic efficiency.

• The Korean Journal of Ecology
• /
• v.4 no.3_4
• /
• pp.59-67
• /
• 1981

Stomatal resistances of the leaves in Heteromeres arbutifolia and of the stems in Ferocactus acanthodes were studied to estimate active and passive behaviors of the guard cells on a theoretical basis. Active and passive stomatal responses to light and water deficit were observed. When the change rate of existent water due to variation of osmotic potential in the guard cells and the loss rate of transpirational water from the guard cells are $\Delta$wi-$\Delta$wt and leaded to active behaviors for opening and closing stomata. However, when stems of F. acanthodes with stomata closecd under the solar irradiation were covered with black cloth and then taken off, behaviors of the guard cells occurred in the condition of $\Delta$wi<$\Delta$wt and were passive. Under the conditiion of $\Delta$wi<$\Delta$wt due to cutout from stems, passive behaviors of the guard cells in H. arbutifolia and F. acanthodes always occurred in spite of the solar irradiation and darkness, respectively. The transpirational resistance coefficients of the guard cells in stems of F. acanthodes (0.380) and Opuntia bigelovii (0.135) wer emuch higher than in leaves of H. arbutifolia (0.034). Moreover, stomatal opening in stems of F. acanthodes during the daytime could be induced by watering. Those results are interpreted as that since the guard cells in desert Crassulacean acid metabolism (CAM) plants always exist in the state of stomatal opening, nocturnal stomatal opening and daytime stomatal closing are exhibited by passive behaviors of the guard cells in the alternant conditioins of $\Delta$wi>$\Delta$wt and $\Delta$wi<$\Delta$wt, respectively.

• Journal of the Society of Naval Architects of Korea
• /
• v.54 no.6
• /
• pp.476-484
• /
• 2017

The purpose of this paper is to verify the structural integrity of a region with numerous penetration-holes in offshore structures such as semi-submersible rig and FPSO. In order to effectively check the yielding and buckling strength of plate members with penetration-holes, a screening analysis program was developed with the FE analysis tool to generate fine meshed model using the theoretical and analysis methods. When a hole is appeared in the plate structure members, the flow of stress is altered such that concentrations of stress form near the hole. Stress concentrations are of concern during both preliminary and detail design and need to be addressed from the perspectives of strength. To configure the geometrical shape, very fine meshed FE analysis is needed as the most accurate method. However, this method is practically impossible to apply for the strength verifications for all perforated plates. In this paper, screening analysis method was introduced to reduce analysis tasks prior to detailed FE analysis. This method is applied to not only the peak stress calculation combined stress concentration factor with nominal stress but also nominal equivalent stress calculation considering cutout effects. The areas investigated by very fine meshed analysis were to be chosen through screening analysis without any reinforcements for penetration-holes. If screening analysis results did not satisfy the acceptance criteria, direct FE analysis method as the 2nd step approach were applied with one of the coarse meshed model considering hole or with the very fine meshed model considering the hole shape and size. In order to effectively perform the local fine meshed analysis, automatic model generating program was developed based on the MSC/PATRAN which is pre-post FE analysis program. Buckling strength was also evaluated by Common Structure Rule (CSR) adopted by IACS as the stress obtained from very fine meshed FE analysis. Due to development of the screening analysis program and automatic FE modeling program, it was able to reduce the design periods and structural analysis costs.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.25 no.5
• /
• pp.413-420
• /
• 2012

In this study, the Kernel integration scheme for 2D linear elastic direct boundary element method has been discussed on the basis of subparametric element. Usually, the isoparametric based boundary element uses same polynomial order in the both basis function and mapping function. On the other hand, the order of mapping function is lower than the order of basis function to define displacement field when the subparametric concept is used. While the logarithmic numerical integration is generally used to calculate Kernel integration as well as Cauchy principal value approach, new formulation has been derived to improve the accuracy of numerical solution by algebraic modification. The subparametric based direct boundary element has been applied to 2D elliptical partial differential equation, especially for plane stress/strain problems, to demonstrate whether the proposed algebraic expression for integration of singular Kernel function is robust and accurate. The problems including cantilever beam and square plate with a cutout have been tested since those are typical examples of simple connected and multi connected region cases. It is noted that the number of DOFs has been drastically reduced to keep same degree of accuracy in comparison with the conventional isoparametric based BEM. It is expected that the subparametric based BEM associated with singular Kernel function integration scheme may be extended to not only subparametric high order boundary element but also subparametric high order dual boundary element.

• The Journal of the Korea Contents Association
• /
• v.6 no.11
• /
• pp.154-160
• /
• 2006

This study is performance thesis to examine structure of excessive consuming culture of modern people's desire turning away from modern people's original purpose of aiming life that is well-being. Method of the research is theological examination of people's desire into consuming and well-being culture is critically analyzed by creation of meanings and differences of showcase that symbolize consuming culture. Also my piece of work 'Well-buying Shop 1' that above theory is applied is selected for focused analysis of concept realization method in video configuration method and technique. The symbol Showcase in the animation represent laboratory of consuming culture and desire for ownership. The animation runs for 3 minutes and 50 seconds focused on animal characters raised in well-being farm. Through cut out animating environment, animal characters have life in the animation and they are completed with long take method and temperament editing type for effort of liberal devotion between audience and the animation. Lithographic technique is used for characters and background images for trial of pictural density by pressures and variety of colors. This study was conducted with the basis of above animation showing opportunity and it has significance on trial of various color of lithographic expression technique that are not commonly used in animation image production.

• The Journal of Korean society of community based occupational therapy
• /
• v.4 no.2
• /
• pp.1-10
• /
• 2014

Objective : The purpose of this study was to investigate the preferences of kitchen environment for stroke patients. Methods : The subjects of this study were 97 who have experience in rehabilitation therapy at hospitals in Busan. A questionnaire was distributed and collected from February 24th to March 13th, 2014. Descriptive statistics of frequency Study were used to analyze data. Results : First, the subjects demand for improvement that use a chair for work and install non-slip tiles. Second, they preferred the non-slip mat, boilers in heating equipment, drawer storage, L-shaped safety handle, adjustable sink of the height, automatic cutout of gas leak, faucet of touch-sensitive type, ㄷ-shaped kitchen and the ceiling-type hood in ventilation system. Third, they need kitchen items such as the sink self coming down, scissors for slices and knife to avoid hand injury. Conclusion : This study would contribute to kitchen environment for fall prevention and ease in use.