• Journal of the Korean GEO-environmental Society
• /
• v.10 no.6
• /
• pp.49-60
• /
• 2009

In order to develop a new rockfall protection fence using high carbon steel wire rod (HSWR) material instead of the conventional wire rope material, the author has conducted the laboratory strength tests of both materials and their connections, and carried out evaluation of absorbing rockfall energy through the vertical field rockfall tests. The vertical filed rockfall tests showed that the new rockfall protection fence with 12 rows of the HSWR could absorb more rockfall energy than 50 kJ which stands for the typical design criteria. In addition, when the quantity of HSWR was increased up to the 16 rows, the capacity of absorbing energy was greatly improved. The new rockfall protection fence was successfully applied to the highway rock-cut slope. As a result of the filed application, its constructability was similar to the conventional fence, but its total image was improved as simple and clean. The total construction cost was saved up to 20% in comparison with the conventional one.

• Journal of the Korean Geosynthetics Society
• /
• v.12 no.1
• /
• pp.101-107
• /
• 2013

Environmental-friendly and economical construction are the recent issues for civil structures and soilbag as facing wall is widely used for cut-slope remediation projects. However, the stability of structures is an important issue for the use of environmental-friendly and economical materials. In order to understand the stability of soilbag reinforced retaining wall, tensile resistance, rupture, tensile strength, and internal/external safety factor of the wall were analyzed with MSEW program and the results were compared to the safety factor of block-type reinforced walls. The stability of retaining wall was analyzed with reduction coefficients of connection strength to check the connection stability. Because it is possible to move between soilbag and geogrid connector for soilbag retaining wall, the safety factor of the wall was analyzed with different inclination angles of soilbag. The analysis result shows that the connection strength and internal/external stability of soilbag reinforced wall satisfy the stability criteria.

• Journal of Korean Society for Geospatial Information Science
• /
• v.18 no.4
• /
• pp.61-69
• /
• 2010

The collapse of a slope or cut embankment brings much damage to life and property. Accordingly, it is very important to analyze the spatial distribution by calculating the landslide susceptibility in the estimation of the risk of landslide occurrence. The heuristic, statistic, deterministic, and probabilistic methods have been introduced to make landslide susceptibility maps. In many cases, however, the reliability is low due to insufficient field data, and the qualitative experience and knowledge of experts could not be combined with the quantitative mechanical?analysis model in the existing methods. In this paper, new modeling method for a probabilistic landslide susceptibility analysis combined Bayesian Network with ontology model about experts' knowledge and spatial data was proposed. The ontology model, which was made using the reasoning engine, was automatically converted into the Bayesian Network structure. Through conditional probabilistic reasoning using the created Bayesian Network, landslide susceptibility with uncertainty was analyzed, and the results were described in maps, using GIS. The developed Bayesian Network was then applied to the test-site to verify its effect, and the result corresponded to the landslide traces boundary at 86.5% accuracy. We expect that general users will be able to make a landslide susceptibility analysis over a wide area without experts' help.

• Korean Journal of Environment and Ecology
• /
• v.21 no.1
• /
• pp.1-12
• /
• 2007

Nauralized plants in Ulleungdo were enlisted as 65 taxa, 21 families,49 genera,63 species and 2 varieties by field survey and flora lists of literature cited. Family Compositae covered 27.7% and Family Gramineae, Family Leguminosae and Family Polygonaceae covered 7.7% each. In this study, the nine taxa such as Rumex nipponicus, Trifolium campestre, Oxalis articulata, Anthriscus caucalis, Ipomoea purpurea, Coreopsis Ianceolata, Galinsoga parviflora, Tritonia crocosmaeflora and Festuca arundinacea are added as Nauralized plants in Ulleungdo. Annual plants ratio is 36.9% by life-form spectrum and Europe ratio is 40.0% by origin. The Urbanization Index was 22.0 and the Ratio of Naturalized has increased by flora lists of literature cited each. Ambrosia artemisiifolia var. elatior is growing in Ulleungdo by a plant cause disturbance. Spread prevention and minimization incoming of gardening plants by management plan of naturalized plants might be required. Moreover, it is needed to induce the succession for the recovery of the cut-slope using the native plants.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.23 no.7
• /
• pp.761-767
• /
• 2012

In this paper, a novel ultra-wideband planar monopole antenna for the UHF communications and Digital-TV reception is proposed. The proposed antenna fed by a coplanar waveguide(CPW) is based on a triangular patch that has a broadband characteristic. To further increase the bandwidth of the triangular patch antenna, the top side of the regular triangular patch is loaded with a notch cut and each oblique side with a step. In addition, a slope is given to the ground plane of the CPW structure. Experimental results show that the -10 dB return loss bandwidth of the proposed antenna is 2,320 MHz from 480~2,800 MHz(5.83:1 bandwidth), which covers all the frequency bands of the various wireless communication systems and Digital TV broadcasting in the UHF band. Within the entire operating frequency range, the measured antenna gain in y-z plane(E-plane) varies from 3.01 to 4.71 dBi.

• The Journal of Engineering Geology
• /
• v.18 no.4
• /
• pp.511-522
• /
• 2008

Domestic slope related measuring system are mainly depending on manual and visual measurements and technical development for natural slopes is poor since the technology is developed focusing on artificial cut slopes. In addition, landslide with a debris flow is occurring frequently due to recent climate abnormally and heavy rains but early forecasts and prevention of disasters are in poor condition. Therefore, construction of ubiquitous sensor network (USN) capable of detecting dangers of landslide for rapid countermeasures is necessary. In this study, new measurements devices and measurement management techniques in compliance with domestic conditions are prepared by establishing ubiquitous based landslide monitoring system and standards of measurement management.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.25 no.1
• /
• pp.73-81
• /
• 1997

This study was conducted to find out the hydroseeding timing of woody plants. Five native plants were used for this experiment and were seeded on the cut slopes by hands in April, May, June, September and October. In order to identify the best seeding time, germination percentage, ground cover rate and plant height were investigated. There was a difference in germination percentage and ground cover rate depending on the seeding time. The results are summerized as follows 1. Characteristics of germination : Seeding was best carried out in spring(May, June) or autumn(September). In spring, Lespedeza cyrtobotrya shows quick germination and rapid growing which can be compared with herbaceous plants using in the hydroseeding. As for Pinus thunbergii, there was little difference in germinatin according to different seeding timing. But Evodia daniellii, Parthenocis년 tricuspidata and Alnus hirsuta seem to need seed treatments to improve the seed germination. 2. Ground cover rate : The most rapid growing plant is Lespedeza cyrtobotrya and the next is Amorpha fruticosa. The other plants show extreamly low ground cover rate, so they seem to be surpressed by herbaceous plants which will be mixed for erosion control. 3. Plant height : On 8 weeks later after seeding, the Lespedeza cyrtobotrya which was seeded in June recorded 17.1cm plant height. It will be enouch height to compete with herbaceous plants. As the Parthenocissus tricuspjdata seeded in May shows 27cm plant length, it can be used more frequently on seeding works if the seed germination were improved. In sum, seeding is best carried out in May. When deciding seeding rate for the purpose of hydroseeding, it will be necessary to adjust the woody plants germination percentage according to seeding timing.

• Journal of agriculture & life science
• /
• v.43 no.6
• /
• pp.19-27
• /
• 2009

This study was carried out to obtain the basic model to estimate damage degree from the correlation analysis between forest fire and site environment factors and to clarify the restoration trends thorough multi-temporal survey by observing species diversity followed by various treatments at damaged forest area over time. From the derived model, the damage degree of forest fire was higher in the area of dense coniferous stands composed of simple story at the elevation of about 100m and 200m, and on steeper slope area over 30 degree. As results of this study, fire damaged trees are needed to cut down and a mixed stand with deciduous and coniferous species from the same area is desirable for the future species composition on fire damaged forest. Thus, site characteristics, local species, and mixed stands are the main consideration to enhance the vegetation recovery.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.11 no.3
• /
• pp.43-47
• /
• 2011

Korea has seasonal weathers which result in the frosting of soil in winter times, and the thawing of soil in spring. These climate characteristics result in the damaging of pavements, due to the repeated freezing and thawing of road pavements during winter and spring. In order to reduce these pavement damages, anti-frost heave layers are being specially installed, however it is being applied based on foreign researches, and therefore result in the waste of national budget. With this study, a database system was constructed for effective management and monitoring of measured temperatures and function data of 2 meters below the embankment, cut slope, and the cutting-embankment boundary, which are 15 regions picked by the frost index diagram. As the study result, an effective storage and management-purpose database was established for easy data searching and downloading for the pavement design engineers.

• Korean Journal of Agricultural Science
• /
• v.45 no.4
• /
• pp.847-857
• /
• 2018

Recently, customers' demand and attention to dried agricultural products or foods have increased due to their convenience and nutritional values. Conventional drying methods such as solar drying and hot air drying have been most widely used for producing a large amount of dried agricultural products; however, those methods require quite a long time and high energy consumption. To compensate for these issues associated with conventional methods, dielectric heating such as microwave and radio frequency heating has been used as a supplemental method in the drying procedure. This study investigated the microwave drying characteristics of squash slices with different thicknesses under different microwave power intensities and determined the best drying model that could precisely describe the experimental drying curves of the squash slices. The squash was cut into slices with two different thicknesses (5 and 10 mm), and then, they were dried under different microwave power intensity ranges between 90 and 900 W with an increase interval of 90 W. Six drying models were tested to evaluate the fit to the experimental drying data, and the effective moisture diffusivity ($D_{eff}$) values of the squash slices under microwave drying were determined. The results clearly show that as the microwave power was increased, the drying time of both squash slices was significantly decreased, and the slope of the drying rate increased. The effective moisture diffusivity was also significantly related with the microwave power intensities and thicknesses of the slices. In addition, the Page model was most suitable to delineate the drying curves of both squash slices under different microwave power intensities.