• Journal of the Korean Ceramic Society
• /
• v.40 no.11
• /
• pp.1078-1084
• /
• 2003

In order to develop a new type of nonlinear optical materials or photocatlaysts, Na$_2$O-Nb$_2$ $O_{5}$-Te $O_2$ glasses were prepared using conventional melt quenching method, and the crystallization behaviors and optical properties of these glasses was investigated. The optical and physical properties for Na$_2$O-Nb$_2$ $O_{5}$-Te $O_2$ glasses are: refractive index, n=2.04$\pm$0.04; density, p (g/㎤)=4.87$\pm$0.58; optical energy band of the transmission cut-off wavelength, E$_{0}$ (eV)=3.14$\pm$0.04. The transparent glass ceramics consisting of the nanocrysatls were obtained when the Na$_2$O-Nb$_2$ $O_{5}$-Te $O_2$ glass was first heat-treated at 3$50^{\circ}C$ for 1 h and than at 40$0^{\circ}C$ for 1 h. A cubic crystalline phase consisting of the nano-crysatls transforms into a stable phase at temperature above 47$0^{\circ}C$ for 1 h.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.20 no.2
• /
• pp.165-172
• /
• 2010

In clinical data minig, choosing the optimal subset of features is such important, not only to reduce the computational complexity but also to improve the usefulness of the model constructed from the given data. Moreover the threshold values (i.e., cut-off points) of selected features are used in a clinical decision criteria of experts for differential diagnosis of diseases. In this paper, we propose a fuzzy discretization approach, which is evaluated by measuring the degree of separation of redundant attribute values in overlapping region, based on spatial distribution of data with continuous attributes. The weighted average of the redundant attribute values is then used to determine the threshold value for each feature and rough set theory is utilized to select a subset of relevant features from the overall features. To verify the validity of the proposed method, we compared experimental results, which applied to classification problem using 668 patients with a chief complaint of dyspnea, based on three discretization methods (i.e., equal-width, equal-frequency, and entropy-based) and proposed discretization method. From the experimental results, we confirm that the discretization methods with fuzzy partition give better results in two evaluation measures, average classification accuracy and G-mean, than those with hard partition.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.21 no.3
• /
• pp.76-85
• /
• 2017

In this study, to evaluate the mechanical properties of fiber-reinforced cement composites by strain rate, hydraulic rapid loading test system was developed. And compressive and tensile strength of the hooked steel fiber and polyamide fiber reinforced cement composite were evaluated. As a result, the compressive strength, strain capacity and elastic modulus were increased with increasing strain rate. The effect of compressive strength by type and volume fraction of fibers was not significant. The dynamic increase factor(DIF) of the compressive strength was higher than that of the CEB-FIP model code 2010 and showed a trend similar to that of ACI-349. The tensile strength and strain capacity were increased with increasing strain rate. The hooked steel fibers were drawn from the matrix. The tensile strength and strain capacity of hooked steel fiber reinforced cement composites were increased as the strain rate increased. The tensile strength and deformation capacity of the fiber reinforced cement composites were increased. And, hooked steel fibers were drawn from the matrix. On the other hand, because the bonding properties of polyamide fiber and matrix is large, polyamide fiber was cut-off with out pullout from matrix. The strain rate effect on the tensile properties of polyamide fiber reinforced cement composites was found to be strongly affected by the tensile strength of the fibers.

• Korean Journal of Community Nutrition
• /
• v.5 no.2
• /
• pp.297-306
• /
• 2000

In order to examine the relationship between the number of different foods consumed and nutrient intake, one-day food consumption were surveyed by 24-hour recall from a sample of 287 individuals(20-49 years) living in Daejon City. The number of consumed food items did not include seasonings except red pepper power, sugar, oil, and soybean paste when used in large amounts(DVS). The number, including all seasonings except salt and vinegar(DVSS), was also counted. Of the total subjects, 43.6%(DVS) or 39.0%(DVSS) consumed 18-23 daily different foods with an average of 20.2 or 22.9, respectively. As the DVS increased, daily intakes of total foods and most food groups were elevated. Cereals however were not changed and eggs were decreased with increasing DVS. Energy and nutrient intakes and their mean adequacy ratio(MAR) and index of nutritional quality(INQ) also show positive correlations with DVS. MAR equal to or greater than($\geq$) 0.75 was taken as a cut-off point for nutritional adequacy. In that case, the mean INQ was shown to be $\geq$1. MRI(10) for energy and 9 nutrients and MAR(3) for Ca, vitamin A, and riboflavin were estimated. Form a regression analysis, when MAR(10) was 0.75, the DVS and DVSS were assumed to be 19.6 and 22.2, respectively. And when MAR(3) was 0.75, the DVS and DVSS were assumed to be 31.6 and 34.6, respectively. However the subjects whose MAR(3) was 0.75(0.7-0.8) 23.8(DVS) or 26.6(DVSS) different foods in average, and their mean intakes of energy and all nutrients, except vitamin A, were ranged at 85-100% of the RDA. Of the 74 subjects who consumed DVS$\geq$24, 24 to 42 numbers took 〈75% RDA of Fe, Ca, riboflavin, and vitamin A. And five of 7 who consumed DVS$\geq$32 took $\geq$125%RDA of protein, which showed concerns of overnutrition in case of DVS$\geq$32. Form the above results it could be suggested that a daily intake of 24-32(or 28) of DVS or 27-35(or 31) of DVSS was recommendable for an optimal nutritional of all nutrients if the variety of food groups and sufficient intake of vitamin A and calcium were emphasized together.

• Journal of Broadcast Engineering
• /
• v.9 no.4 s.25
• /
• pp.424-433
• /
• 2004

Jing(gong) is one of the most well known Korean traditional Samulnori instruments to the general public. Samulnori is consisted of four instruments, them being : the jingo the janggu (hour-glass drum). the kkwaenggwari, and the buk(drum). Of the four instruments, the jing with its deep, and yet soft and beautiful long lingering sound embraces the sounds of the other three. The jing is a brassware instrument, a compound of $70{\%}\;copper\;and\;22{\%}\;tin.$\;A high quality brassware is used when the jing is made. The jing is shaped with a 39-40cm circular plate and a rim that gives 7.0-7.5cm of depth to the instrument. Even with its most simple structure, when the circular plate is hit during performance, the rim which supports the circular plate gives resonance to the sound making low-frequency sounds. Therefore the range of the representative frequency of the full rim jing is between $118.4{\~}366.0[Hz],$\;the lingering sound lasts for more than 20 seconds afterwards. When the jing with half of its rim cut off is hit the basic frequency is $139.9{\~}387.5[Hz].$\;And the sound lasted for ten more seconds. The jing of its rimless frequencies are distributed between $990.5{\~}1,372[Hz].$\;And the lingering sound lasts for 5seconds afterwards. Therefore, different thickness and depth of the rim may give new resonance frequencies and alter the longing time of the sound. This thesis paper will try to reveal the relationship between the thickness or depth of the rim (which holds the bending circular plate) and the frequency or the lasting time of the sound.

• Resources Recycling
• /
• v.14 no.5 s.67
• /
• pp.13-17
• /
• 2005

As a basic study for recycling molten converter slag as an ordinary portland cement (OPC) by a conversion process, the reaction mechanism and the rate of the formation of $C_4AF$ which is one of the main components of OPC were investigated. The converter slag whose basicity was controlled by adding reagent grade $SiO_2$ was melted and hold for 30 minutes in MgO crucible at $1300^{\circ}C{\sim}1350^{\circ}C$. Then, the sintered CaO pellet heated at the same temperature was dipped into the molten slag and hold for $10{\sim}30$minutes. After the reaction, the crucible was cooled in air and the specimen was cut off to the horizontal direction of the crucible. The dissolution rate of $C_3A$ pellet was measured by the change of radius of the sintered $C_3A$ pellet, and the formed phase of $C_4AF$ was observed by SEM/EDX. As a result, the dissolution rate of $C_3A$ pellet into molten slag was increased from $0.75{\times}10^{-4}(cm/sec)$ at $1300^{\circ}C$ to $1.67{\times}10^{-4}(cm/sec)$ at $1350^{\circ}C$, and the mixed layer of $C_4AF$ and $C_{12}A_7$ was found between slag and $C_3A$ pellet.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2009.06a
• /
• pp.475-486
• /
• 2009

The geological survey of the Mokdo island is for the fist time conduted in Korea history. The island had erupted before $70{\sim}80$ million years as a strato-volcano. The original volcano had been dissected for long periods up to the skeletal stage through the planeze stage. If the island area is surveyed afterwrds in detail, the position of crater is available to be found, either. The coastal terrace is found at 50m level in Mokdo island which is correlated to its fourth plane. The microgeomorphological features as coastal terrace, cliff, sea cave, wave-cut bench, sea stacks, notch, and tafoni, etc. were described. The Mogdo island is located off Molundae at the extension of Nagdong Jeongmaeg(낙동정맥 洛東正脈) showing a "floating turtle". The name of Mogdo island is needed to change to the "Yoo-goo-do" which means the swimming turtle. The Mokdo island is as suitable tourist attraction for if has enough touism sesouccesein sea. The deuelopsment of coartal sightseeing anound lighthoure and uninhabited islands will hare an impontant effect upon construction of the oceanic capitol city of Busan Haabor. The master plan built up an arboretum on the island, a coastal oceanarium, a seaweeds garden under sea coast, and other oceanic culture-spaces is completed in the study.

• International Journal of Highway Engineering
• /
• v.9 no.4
• /
• pp.193-204
• /
• 2007

Deformation strength($S_D$) is a property which shows relatively good correlation with rut resistance of asphalt mixtures at high temperature. The Asphalt Pavement Analyzer (APA) is widely used as an equipment for estimating rut resistance of asphalt mixtures. The APA was used as corresponding property of the $S_D$ to estimate rutting resistance of asphalt mixtures. Many data were collected to establish the correlation of $S_D$ with APA. For $S_D$ test, the specimen is submerged into the $60^{\circ}C$ water for 30 minutes before applying a vertical load at the speed of 50mm/min to obtain peak load (P) and deformation (y) for $S_D$ calculation. For the same materials, APA test was performed. Relation of the $S_D$ with APA rut depth was evaluated using regression analysis. The $R^2$ value was 0.76, indicating this simple test procedure being a possible method for predicting deformation resistance of asphalt concretes at high temperature. It was also shown that, using the regression model, minimum value(s) of $S_D$ of surface course asphalt mixture or binder course for a particular road level can be determined. The limit values may be possible to use as cut-off value(s) of asphalt mixtures for the layer after further elaborated studies.

• Korean Journal of Applied Biomechanics
• /
• v.15 no.3
• /
• pp.143-152
• /
• 2005

The purpose of this study was to predict the failure or success of the Snatch-lifting trial as a consequence of the stand-up phase simulated in Kane's equation of motion that was effective for the dynamic analysis of multi-segment. This experiment was a case study in which one male athlete (age: 23yrs, height: 154.4cm, weight: 64.5kg) from K University was selected The system of a simulation included a multi-segment system that had one degree of freedom and one generalized coordinate for the shank segment angle. The reference frame was fixed by the Nonlinear Trans formation (NLT) method in order to set up a fixed Cartesian coordinate system in space. A weightlifter lifted a 90kg-barbell that was 75% of subject's maximum lifting capability (120kg). For this study, six cameras (Qualisys Proreflex MCU240s) and two force-plates (Kistler 9286AAs) were used for collecting data. The motion tracks of 11 land markers were attached on the major joints of the body and barbell. The sampling rates of cameras and force-plates were set up 100Hz and 1000Hz, respectively. Data were processed via the Qualisys Track manager (QTM) software. Landmark positions and force-plate amplitudes were simultaneously integrated by Qualisys system The coordinate data were filtered using a fourth-order Butterworth low pass filtering with an estimated optimum cut-off frequency of 9Hz calculated with Andrew & Yu's formula. The input data of the model were derived from experimental data processed in Matlab6.5 and the solution of a model made in Kane's method was solved in Matematica5.0. The conclusions were as follows; 1. The torque motor of the shank with 246Nm from this experiment could lift a maximum barbell weight (158.98kg) which was about 246 times as much as subject's body weight (64.5kg). 2. The torque motor with 166.5 Nm, simulated by angular displacement of the shank matched to the experimental result, could lift a maximum barbell weight (90kg) which was about 1.4 times as much as subject's body weight (64.5kg). 3. Comparing subject's maximum barbell weight (120kg) with a modeling maximum barbell weight (155.51kg) and with an experimental maximum barbell weight (90kg), the differences between these were about +35.7kg and -30kg. These results strongly suggest that if the maximum barbell weight is decided, coaches will be able to provide further knowledge and information to weightlifters for the performance improvement and then prevent injuries from training of weightlifters. It hopes to apply Kane's method to other sports skill as well as weightlifting to simulate its motion in the future study.

• Journal of Chest Surgery
• /
• v.44 no.1
• /
• pp.44-50
• /
• 2011

Background: Cardiovascular complications are major causes of morbidity and mortality following non-cardiac thoracic operations. Recent studies have demonstrated that elevation of N-Terminal Pro-B-type natriuretic peptide (NT-proBNP) levels can predict cardiac complications following non-cardiac major surgery as well as cardiac surgery. However, there is little information on the correlation between lung resection surgery and NT-proBNP levels. We evaluated the role of NT-proBNP as a potential marker for the risk stratification of cardiac complications following lung resection surgery. Material and Methods: Prospectively collected data of 98 patients, who underwent elective lung resection from August 2007 to February 2008, were analyzed. Postoperative adverse cardiac events were categorized as myocardial injury, ECG evidence of ischemia or arrhythmia, heart failure, or cardiac death. Results: Postoperative cardiac complications were documented in 9 patients (9/98, 9.2%): Atrial fibrillation in 3, ECG-evidenced ischemia in 2 and heart failure in 4. Preoperative median NT-proBNP levels was significantly higher in patients who developed postoperative cardiac complications than in the rest (200.2 ng/L versus 45.0 ng/L, p=0.009). NT-proBNP levels predicted adverse cardiac events with an area under the receiver operating characteristic curve of 0.76 [95% confidence interval (CI) 0.545~0.988, p=0.01]. A preoperative NT-proBNP value of 160 ng/L was found to be the best cut-off value for detecting postoperative cardiac complication with a positive predictive value of 0.857 and a negative predictive value of 0.978. Other factors related to cardiac complications by univariate analysis were a higher American Society of Anesthesiologists grade, a higher NYHA functional class and a history of hypertension. In multivariate analysis, however, high preoperative NT-proBNP level (>160 ng/L) only remained significant. Conclusion: An elevated preoperative NT-proBNP level is identified as an independent predictor of cardiac complications following lung resection surgery.