• Proceedings of the KSME Conference
• /
• 2003.11a
• /
• pp.344-349
• /
• 2003

The purpose of this study is to ascertain the ability of New type cutter using Hybrid Rocket Propulsion System to cut normal carbon steel and also compound metal like stainless steel which cannot be cut by regular oxygen-acetylene cutter. To compare cutting performance, Two different types of experiment with oxygen-acetylene and Hybrid Combustion cutters were performed. As a result, Hybrid Combustion cutter is used to cut both carbon steel and stainless steel with cutting speed of 400mm/min(carbon steel) and 250mm/min(stainless steel). Otherwise, oxygen-acetylene cutter can be used to cut only carbon steel with cutting speed of 500 $^{\sim}$ 700mm/min. The possibility of Hybrid Combustion cutter as a cutting machine was confirmed.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.10 no.6
• /
• pp.57-62
• /
• 2001

Recently, it has increased that the importance of gas pressure weldment of steel bars in large construction bars. But there has hardly been any studies about it. Therefore we need more research. SD40 steel bar (32mm in diameter) which has been practically used at construction sites are tested about tension, bonding, fatigue, a macro structure and micro structure at foil gitudinal section and hardness to fed out the mechanical property and best welding ranges in some cases of mechanical cut and gas cut before gas pressure welded. It is that a gas-pressure welded zone of steel bar where was cleaned of impurities in way of two-upsetted method is more excellent bending and tension property than the regulation of KD D 0244. Also gas cut bars gained hardness from the heat affected zone so. In conclusion, to improve the weldability of steel bars, it is considered best to clean mechanically cut sutra- faces and then weld them by a method of 2 step upset way.

• Journal of the Korean Society for Precision Engineering
• /
• v.32 no.12
• /
• pp.1031-1037
• /
• 2015

Laser assisted machining (LAM) is an effective method with which to effectively process difficult-to-cut materials. Simple machining processes, such as turning and linear tool paths, have been studied by many researchers. But, there are few research efforts on LAM workpieces using threedimensional shapes because of difficulties controlling the laser heat on workpieces with inclined angles or curved surfaces. Two methods for machining three-dimensional workpieces are proposed in this paper. The first is that the heat source shape and laser focal length are maintained using an index table. Second, a rotary type laser module is controlled using an algorithm to move the laser heat source in all directions. This algorithm was developed to control the rotary type laser module and the machine tool simultaneously. These methods are verified by a CATIA simulation.

• Journal of Power System Engineering
• /
• v.12 no.3
• /
• pp.32-37
• /
• 2008

The present work aims to determine the overall pressure losses in the shell from the point of entry of the fluid to the outlet point of fluid of shell and tube heat exchanger. The main contribution of the present work is concerned with calculating the pressure drop in the interior section and window section. Shell-side flow velocity distributions have been evaluated. We assume that the shell-side fluid is turbulent. The calculation procedure is based upon the Delaware method. Evaluation of pressure drop on the shell side will be helpful for a designer or manufacturer of a heat exchanger.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.23 no.11
• /
• pp.1363-1370
• /
• 1999

A study of scaling and heat transfer has been carried out for a vertical tube evaporator in which $CaSO_4$ saturated water flows upward. Experimental apparatus including vacuum chambers and heaters has been designed and manufactured to study scaling phenomena for three different pressures(1atm, 0.27atm and 0.16atm). Overall heat transfer coefficients have been measured and shown to decrease with time as scaling proceeds. After the end of experiments, the vertical tube has been cut to measure the thickness of scale at different heights. Below the height where the bulk fluid temperature does not reach saturated temperature, the thickness of scale increases, however, beyond that height occurring saturated condition, the thickness does not vary much or even decreases a little. The measured fouling resistances also support these variations of scale thickness.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2001.10a
• /
• pp.172-178
• /
• 2001

Titanium alloys have lightness, high strength and good corrosion resistant characteristics, and broadly used in manufacturing parts for military and aerospace industries. And these alloys also are recognized for organism materials comparatively and used as fixing ones in the human body. Nevertheless thess alloys have excellent properties such as corrosion resistance, heat resistance, and good tensile strength, it is difficult to machine by traditional methods because of high hardness and chemically activated property. So higher tool wear is expected when cutting by tools. Therefore, it is required nontraditional machining process. And the mechanical characteristics such as surface structure and shape, hardness and bending strength are studied for wire electrical discharge machined and surface ground titanium alloys for various heat-treated conditions.

• Proceedings of the SAREK Conference
• /
• 2009.06a
• /
• pp.928-933
• /
• 2009

The purpose of this study is to examine the energy consumption, carbon dioxide emission & energy cost of district heating using sewage source. The annual TOE of heat pump using sewage source save 37.1 percent than city gas boiler. And annual carbon dioxide emission of heat pump cut down 41.3 percent than city gas boiler. If it charges the rate schedule for district heating to apartment resident, collected amount are 3,127,170 thousand won. As energy cost of heat pump & circulation pump are 1,378,072 thousand won. the profits are 1,749,098 thousand won. As payback period is 8.97years, applicability is low level. However, it has advantages in energy consumption, carbon dioxide emission & energy cost. Therefore, it needs to proceed through government assistance.

• Journal of the Korean Society of Tobacco Science
• /
• v.23 no.1
• /
• pp.40-44
• /
• 2001

This study was carried out to investigate relationship between contents of moisture and chemical components in burley tobacco after heat treatment. Initial moisture contents of burley tobacco was 32% after cutting and casing. Burely cut tobaccos were treated at various temperature(10$0^{\circ}C$, 13$0^{\circ}C$, 145$^{\circ}C$ and 16$0^{\circ}C$) and time(0, 5, 10, 15, 20 and 30 min) in mechanical convection oven. Moisture contents of burley tobacco after heat treatment were in the range of 1.9% to 18.4%. Relationship between moisture contents and total sugar, pH, total volatile base, ammonial, L value of color, nicotine, nornicotine, and $\beta$-nicotyrine contents were positively correlated. Correlation between moisture contents and crude ash, ether extracts, 2,6-deoxyfructosazine, 2,5-deoxyfructosazine, a value of color, citric acid, m-xylene, ${\gamma}$-butyrolactone and 5-methyl-2-furfural were negative.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 1998.08a
• /
• pp.51.3-51
• /
• 1998

• Food Science and Preservation
• /
• v.18 no.3
• /
• pp.288-293
• /
• 2011

This study investigated the changes in the quality of fresh-cut lotus roots that were treated with hot water. Lotus roots were purchased from Daegu, Korea. They were washed, peeled, and cut into lcm-thick slices with a ceramic knife. The peeled and sliced lotus roots were dipped for 45 sec in water at 30, 55, and $80^{\circ}C$. After they were air-dried at room temperature, the slices were packed in polyethylene films and stored at $4^{\circ}C$ for 12 d. Then the changes in the weight loss, color, total viable cell, and sensory characteristics were measured. Generally, the weight loss of the lotus roots that were treated with hot water slightly increased. The application of the heat treatment delayed the browning of the lotus roots, especially the treatment with $55^{\circ}C$ hot water. The L and a values of the lotus roots that were treated with $80^{\circ}C$ hot water significantly increased during their storage, though. The heat treatment effectively inhibited the growth of microorganisms. The organoleptic quality of the lotus roots that were treated with $55^{\circ}C$ hot water was the best.