• Advances in materials Research
• /
• 제7권1호
• /
• pp.17-28
• /
• 2018

Niobium is a candidate base for new alloys devoted to applications at especially elevated temperatures. Elaborating and shaping niobium-based alloys by conventional foundry may lead to mechanically interesting microstructures. In this work a series of charges constituted of pure elements were subjected to high frequency induction melting in cold crucible to try obtaining cast highly refractory Nb-xCr and Nb-xCr-0.4 wt.%Calloys(x=27, 34 and 37 wt.%). Melting and solidification were successfully achieved. The as-cast microstructures of the obtained alloys were characterized by electron microscopy and X-ray diffraction and their hardness were specified by Vickers macro-indentation. The obtained as-cast microstructures are composed of a body centered cubic (bcc) niobium dendritic matrix and of an interdendritic eutectic compound involving the bcc Nb phase and a $NbCr_2$ Laves phase. The obtained alloys are hard to cut and particularly brittle at room temperature. Hardness is of a high level (higher than 600Hv) and is directly driven by the chromium content or the amount of {bcc Nb - $NbCr_2$} eutectic compound. Adding 0.4 wt.% of carbon did not lead to carbides but tends to increase hardness.

• Journal of Welding and Joining
• /
• 제29권1호
• /
• pp.41-45
• /
• 2011

SnAgCu lead-free solder alloy is considered as the best alternative to eutectic tin-lead solder. However, the detailed material properties of SnAgCu solder are not available in public. Hence, this paper presents an estimation of mechanical properties of SnAgCu lead-free solder. In particular, the weight percent of Ag was varied as 1.0wt%, 2.5wt%, 3.0wt%, and 4.5wt% in order to estimate the effect of Ag in the Sn-xAg-0.5Cu ternary alloy system. For this purpose, four types of SnAgCu bars were first molded by casting and then standard specimens were cut out of molded bars. Micro-Vickers hardness, tensile tests were finally performed to estimate the variations in mechanical properties according to the weight percent of Ag. Test results reveal that the higher the weight percent of Ag is, the higher the hardness, yield strength, and ultimate tensile strength become. More material properties will be further investigated in the future work.

• 대한가정학회지
• /
• 제49권10호
• /
• pp.91-101
• /
• 2011

The purpose of this study was to find a therapeutic intervention for a couple in the pre-divorce stage. We used data from the case study to examine the factors related to marital conflict and enhancements related to the family of origin. Our sample was the couple in pre-divorce stage who has been married for 3 years. The therapeutic intervention methods used were taken from Positive Psychology, Family Systems Theory, Communication Theory, and Solution-Focused Therapy. We counseled the couple once a week for 10 sessions from $5^{th}$ October to $7^{th}$ December in 2010. Our objective was to give a positive perspective on the couple who was in the pre-divorce stage. We also provided clear-cut, practical techniques for responding productively to inappropriate expressions of anger. The couple acquired strategies to make their relationship work more effectively. Finally, the couple set their family goals for adjustment instead of divorce.

• 복식
• /
• 제59권4호
• /
• pp.41-53
• /
• 2009

This study analyzed expression types of dot patterns and derived out inherent characteristics to provide fundamental resources for advancement of high value added creative designs. As a result of the study, Firstly, the circular motive was used to form silhouettes or as a symbol of a decoration. Secondly, a simple form and color dot pattern was used to create one side, or a circular shaped accessory was used to be recognized as a construction line or a decoration line. Thirdly, textile printing is mainly used but handicraft and decorative images were used to add vitality through piece technique, embroidery, collage, cut-out, patch work, etc. Fourthly, different circular motives were integrated, partitioned and duplicated for abstract geometrical images. Fifthly, variations were added by mixing different dot patterns that are arranged regularly and irregularly in different sizes and gaps creating compounded designs with handicraft touches, different angles or on top of each other. Sixthly, hybrid images were created with rearrangement of dot patterns and by adding floral shapes, stripes or other abstract and geometrical shapes. Such various and creative attempts construct new formative beauty in fashion design and I believe that it can establish the development of unique images that satisfies the taste of today's consumers.

• 한국표면공학회지
• /
• 제29권6호
• /
• pp.753-759
• /
• 1996

The artificial construction of well-defined low-dimensional (low-D) quantum structures, such as quantum wire (QWR) still attracts attention of many researchers due to their applications in room-temperature optoelectronic devices. In this work, the migration enhanced epitaxial growth (MEE) and the analysis of InAs/ AlAs QWR are reported. On the vicinal semi-insulating InP substrate of $3^o$ tilted cut from (100) surface towards (010) direction, InAs/ AlAs QWR superlattices have been successfully grown by MEE with the introduction of growth interruption at each shutter operation of MBE cell. The in-situ RHEED analyses show that MEE gives superior step-flow growth (SFG) and sharper interface formation over a conventional MBE growth. We have grown 4 samples in series varying the growth temperature. The QWR samples are analyzed by photoluminescence (PL) and atomic force microscopy (AFM). From the AFM images, we can get the definitely resolved 1-D structures. This structure is believed to be due to the MEE method and its separation is better than any other data from others. We are now studying the dependence of the structure on the growth temperature.

• 기술사
• /
• 제14권3호
• /
• pp.9-21
• /
• 1981

The rationalization for Tunnel Drifting is based on the high productivity which is achievable due to Continuous work with a Jumbo Drill, resulting in a much higher efficiency them the Conventional method of blasting, mucking and supporting services. Large projects of over 4,000m Tunnel Drifting are condidated to justify the use of a Jumbo Drill with a combination of superior explosives, machinery and techniques. During a Tunnel Drifting test, Gulita, Nabit and slurry made by Nitro Nobel were employed with following results. 1, Conditions: a. Granite Rock with Two free face b. Burden (W), 2m c. Diameter of hole, 42mm d. Depth of hole 3.5m e. Hole pitch 0.6m f. Charged Explosive per hole Gelatin Dynamite 4 pieces (112.5${\times}$4ea)+Guuita 5 pieces(110g${\times}$5ea) g. Simal-taneous Detonation h. After the blasting resultant rock size was Less 40% of the 0.3m Lumps. 2. Calculation results W=q/Wn=100cm‥‥‥Burden in simultaneous blasting 0.865kg(7.7ea)/hole ‥‥‥Amount of charge but hole pitch is 1.5W-2W The estimated cost of using a Jumbo Drill for the Construction of a 3,000,000 bbL sub-surface oil storage would be as follows: This calculation is based on the Jumbo Drill advancing 3.6m per blasting cycle. Unit cost/bbL Excavation $3.13 The attached sheet shows ideal Drilling pattern with Burn Cut & Smooth blasting method. In conclusion, it is my opinion that this method will assure safety and save cost and improve our technical know-how.

• 유통과학연구
• /
• 제11권4호
• /
• pp.5-11
• /
• 2013

Purpose - The aim of this work is to study the reorientation that the export industrial sectors in Costa Rica have experienced during the last 20 years. Research design, data, methodology - The study employs the Cluster Analysis with the export data (20 years of cut-off period) from Costa Rica to the U.S-market. To make the predictions, the technique of the time series was used, with official data (from 2001 to 2010) from the U.S. Department of Commerce and the U.S. International Trade Commission. Results - The Cluster Analysis, show how the economic sectors of traditional products exports of Costa Rica have progressively become in exporters of non-traditional products, meanwhile,the time series confirms that this trend will continue, at least during the next five years. Conclusions - The industry of traditional products exports of Costa Rica (dressmaking, vegetables, coffee, mate, species, etc.) will progressively become in exporters of non- traditional products with a high-tech component (i.e., mechanical equipment and devices, electronic devices and medical equipment),as a consequence of the Chinese (Costa Rica's main competitor) economy's presence in the Organization for Economic Co-operation and Development (OCDE). This fact has enabled the potential improvement of Costa Rica's international competitiveness in the U.S. market.

• 한국정밀공학회지
• /
• 제34권4호
• /
• pp.247-251
• /
• 2017

Titanium alloy has been widely used in the aerospace industry because of its high strength and good corrosion resistance. During cutting, the low thermal conductivity and high chemical reactivity of titanium generate a high cutting temperature and accelerates tool wear. To improve cutting tool life, cryogenic machining by using a liquid nitrogen (LN2) jet is suggested. In cryogenic jet cooling, evaporation of LN2 in the tank and transfer tube could cause pressure fluctuation and change the cooling rate. In this work, cooling uniformity is investigated in terms of liquid nitrogen jet pressure in cryogenic jet cooling during titanium alloy turning. Fluctuation of jet spraying pressure causes tool temperature to fluctuate. It is possible to suppress the fluctuation of the jet pressure and improve cooling by using a phase separator. Measuring tool temperature shows that consistent LN2 jet pressure improves cryogenic cooling uniformity.

• 한국재료학회지
• /
• 제23권12호
• /
• pp.737-744
• /
• 2013

We demonstrated size control of Au nanoparticles by heat treatment and their use as a catalyst for single-walled carbon nanotube (SWNTs) growth with narrow size distribution. We used uniformly sized Au nanoparticles from commercial Au colloid, and intentionally decreased their size through heat treatment at 800 oC under atmospheric Ar ambient. ST-cut quartz wafers were used as growth substrates to achieve parallel alignment of the SWNTs and to investigate the size relationship between Au nanoparticles and SWNTs. After the SWNTs were grown via chemical vapor deposition using methane gas, it was found that a high degree of horizontal alignment can be obtained when the particle density is low enough to produce individual SWNTs. The diameter of the Au nanoparticles gradually decreased from 3.8 to 2.9 nm, and the mean diameter of the SWNTs also changed from 1.6 to 1.2 nm for without and 60 min heat treatment, respectively. Raman results reconfirmed that the prolonged heat treatment of nanoparticles yields thinner tubes with narrower size distribution. This work demonstrated that heat treatment can be a straightforward and reliable method to control the size of catalytic nanoparticles and SWNT diameter.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2009년도 춘계 학술발표회
• /
• pp.640-648
• /
• 2009

Recently the truction of coastal reclaimation work has been extensively implemented in Korea. The Sondo New City is being established on the reclaimed land from the sea, construction companies of metro construction are planing to pull-out the sheet pile for saving the construction cost. In the case of soft marine clay, it is very difficult to pull-out the sheet pile by using the hydraulic hammer difficult. Therefore, the man of the field must be aware of vibration effect to the ground and the structure. For understanding the vibration effect to the ground during subway construction, the model was formulated with 1/25 braced-cut for subway construction. Scott and Iai(1989) proposed the law of the similarity for other experimental conditions. The laboratory model test was conducted under the vibration condition of sheet pile pulling out. The settlement on the ground surface was measured during the shaking table test. The pore water pressure was also monitored in the upper, middle, and lower layers of soil. The field settlement level and the pore water pressure can be predicted by using the results of the laboratory shaking table test.