• Proceedings of the Korean Geotechical Society Conference
• /
• 1994.06c
• /
• pp.25-48
• /
• 1994

As Korea is a mountaneous country, many cut slopes are formed along the highways and in housing projects, by cutting through the layers which are composed of shallow soil depth and the underlying hard layers with different degrees of weathering. Such slopes are often foiled by heavy rainfall, and thus its effects on the slope instability are described in detail in. this paper. The importance of discontinuties on the slope stability as well as the effects of rainfall is emphasized for high quality design of cut slopes.

• Journal of the Korean Society of Safety
• /
• v.31 no.5
• /
• pp.61-66
• /
• 2016

Many cut slopes are located along national roads, there were the collapse of cut slopes. In this study, the weights for condition evaluation of rock slopes was calculated using the entropy method and analytic hierachy process(AHP) method. The entropy analysis was performed using 95 cut slope data, and the AHP analysis was performed by a questionnaire to several expert. The weights based on analysis results were compared with evaluation weights of existing standard. As a result of this study, there was the difference of weights among the analytical methods. Later on, if this study's results is used to improvement current evaluation weights, it will be possible to perform the reliable condition evaluation.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2000.11a
• /
• pp.527-534
• /
• 2000

136 cut slopes which extends from Namyangju to Chunchon city along the 46th national highway were investigated to analyze the influence factors affecting slope instability. Geologic and geotechnical conditions were examined and the detailed investigation were carried out for fifty five failed slopes. failure mode (wedge failure, planar failure, circular failure, sheet eroison and rock falls) are examined with respect to slope inclination, rock type, weathering grade and discontinuity patterns. It is suggested that the failure modes and their dimensions have relations to the morphology and geologic conditions of the slopes. Wedge failure has highest is the most frequent failure mode and falls, sheet erosions, planar failures and circular in descending order of failure percentage. Wedge failure is most dominant failure type over all lithology except quartzite formation. In slopes of well foliated and banded gneiss, failure ratio of wedge is up to 50% ca. Failure ratio(number of rock fall/number of total failure) of rock fall increases with increase fo slope inclinations and decrease of weathering grade. Dimension analyses of failed slopes shows wedge and circular failure has higher value of D/L and D/H than planar failure and sheet erosion.

• Journal of the Korean Geotechnical Society
• /
• v.25 no.12
• /
• pp.27-35
• /
• 2009

KICT (Korea Institute of Construction and Technology) and KISTEC (Korea Infrastructure Safety and Technology Corporation) have been carrying out inventory survey on cut slopes along national roads since 2006. Unlike precision safety check, cut slope inventory survey is a simple check about cut slope's characteristics with the naked eye to collect the data base of slope maintenance. Inventory survey is classified into general status, cut slope characteristics and inspector opinions. The inventory data are analyzed to identify dangerous slopes and decide a safety ranking. In this paper, we performed a correlation analysis using SPSS (ver.15) about the 10,461 cut slope inventory data which are collected in Kangwondo and Chungcheongdo from 2006 to 2008. We calculated the correlation coefficient between cut slope inventory data and the danger score derived from the data. And we evaluated cut slope inventory data which have the more influence on the danger degree of cut slope. According to results of correlation analysis, we found that inventory data influencing cut slope danger degree are stuck and fallen rock, orientation of discontinuity and angle of upper slope. And these data are slightly different by regionally. Later on, if inventory research is finished, we will understand regional characteristics of cut slopes.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.26 no.1
• /
• pp.12-20
• /
• 1998

This study was carried out from June 1996 to November 1997 to analyze the growth characteristics of the introduced species revegetated on highway cut-slopes. The number of revegetation measures type surveyed were fourteen such as seed-spraying measures, block-sod pitching measures, and hydro-seeding measures with seed-fertilizer-soil materials. The introduced species for revegetation measures were mostly Festuca arundinancea(cool season grass), Eragrostic curvula(warm season grass), Lolium perenne(cool season grass), Dactylis glomerata(cool season grass), Poa pratensia(cool season grass). The species diversity index of the upper part on highway cut-slopes were greater than that of the middle part and lower part. The growth of introduced species was good on north-facing cut-slope than the others and that was flourish in temperate north forest zone. Also, the introduced species seemed to decrease or disappear, while the ratio of native woody and herb species which were in mature stage seemed to increase.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2010.03a
• /
• pp.1264-1270
• /
• 2010

In this study, the effects of slope inclination and rainfall on weathered soil slope stability were investigated for current cut soil slope design criteria. A series of slope stability analysis was performed on the slopes with the same height (5m), but different inclinations (1:0.8, 1:1, 1:1.2, 1:1.5, 1:2). Seepage analysis was also conducted to examine the rainfall effects directly and compare the combined seepage and slope stability analysis results with the slope stability analysis results for rainy season from the current cut soil slope design criteria. Typical properties for weathered soils were used in both the slope and seepage analysis. The analysis results showed that, for the slopes much steeper than the standard slopes, the factor of safety criteria were satisfied. Therefore, it appears that the slope designs by current cut soil slope design criteria lead to conservative results.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.7 no.3
• /
• pp.14-25
• /
• 2004

The purpose of this study was investigated to the change of vegetation coverage by elapsed years on the cut slope of forest road in Jinju-si. The results obtained could be summarized as follows; The plant coverage on the cut slope of forest road was decreased hastily in first and second year after seeding. The plant coverage on the cut slope of forest road was increased as growth of seed-sprayed from third year. But the plants were began to competition with between sprayed seeds and invaded plants from third to fifth year after seed-spray. The numbers of invading plants were gradually increased as 581 individuals from sixth year after seed-spray. The cut slopes of the forest roads turned to a good site condition for growing of invasion plants. And also the total coverage on cut slope of forest roads by invading of surrounding plants was increased more. It showed that plant invasion on cut-slopes of forest roads would be mostly influenced by surrounding plants. The number of surrounding plants on the cut-slopes of forest roads was 59 species, and the number of invading plants showed 65 species. The invading species were high in order of Boehmeria tricuspis, Oplismens undulatifolius, Miscanthus sinensis var. purpurascens, Erechtites hieracifolia and Artemisia princeps var. Orientalis In the stepwise regression analysis, main factors affecting the coverage of vegetation on the cut-slopes of forest road showed in order of elapsed years, gravel contents(30~50%), middle, sandy loam, sandy clay-loam, soil hardness, aspect(NS), concave(凹) type and gravel contents(15~30%).

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.8 no.1
• /
• pp.10-16
• /
• 2005

This experiment was conducted to study on application of several Korean native plants by seed spray methods for cut slope revegetation, and possibility of replacement almost imported tall fescue seeds by native herbaceous plants. So, we investigated growth and covering rate after sowing native plants seeds at the artificial slope plots in Suwon and the rock exposed cut-slopes in Wonju city. Emergence rate after seed spray at artificial slopes were higher Elsholtzia splendens and Dianthus superbus var. longicalycinus, showing the highest in E. splendens. Also, E. splendens, D. superbus var. longicalycinus, and Agrostemma coronaria were possible to use for seed spray at the rock exposed cut-slopes. The plots of mixed native plants show more seasonal scenery than that of tall fescue. Soil surface run-off by Typhoon was less in plot sown native plants than those of lawn grass, resulting fresh weight of roots was heavier. Thus, we found that the mixed seed spray of several native herbaceous plants, E. splendens, D. superbus var. longicalycinus, and Agrostemma coronaria, were well covered the slopes as tall fescue.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2009.09a
• /
• pp.1051-1056
• /
• 2009

Recently, there are many wide road in korea, so The Large scale cut slopes are increasing. Large scale cut slopes are better then small scale in case of construction and maintenance. General, Reinforced Slopes by Shotcrete are difficult to inspect because of stiff Slope and highly Working Area. So the Inspection Techniques are needed by the Non-contact and Non-destructive. On this Study, We are studying the method about efficient valuation and maintenance of Large scale Reinforced slopes by Shotcrete.

• Journal of Korean Society for Geospatial Information Science
• /
• v.18 no.4
• /
• pp.71-77
• /
• 2010

Cut Slope Management System(CSMS) is a systematic maintenance and management system designed to prevent the collapse of cut slopes located along national roads. In order to implement safe road operation system, KICT has started the inventory of cut slopes and developed a cut slope database since 2006. Cut slope database management system using GIS technology and navigation system was developed as a Information Technology application. Through the Cut Slope Navigation System(SLOPE-Navi.), the previously developed database was checked and verified. The converted cut slope inventory data and field investigation data of 28,707 cut slopes were loaded on the navigation map. We consider that the Cut Slope Navigation Management System can be useful as in-situ system, which can be systematic and effective DB management and operation to prevent cut slope collapses and establish a remedial countermeasure as mitigation concerning disasters.