• Journal of the Korean Society for Precision Engineering
• /
• v.18 no.7
• /
• pp.106-111
• /
• 2001

This study reports the grinding characteristics of quartz. Grinding experiments were performed at various grinding conditions including wheel mesh, table speed and depth of cut. The grinding forces and specific grinding energies were measured. Surface roughness was also measured with tracer and the ground surfaces were observed with SEM. A new parameter SDR(Surface roughness Direction Ratio) is proposed to characterize the grinding mechanisms of quartz. A set of experiments was performed to verify the effectiveness of the suggested parameter. The experimental results indicate that the ductile mode is the dominant material removal mode at the grinding conditions which show the higher value of SDR whereas the material is removed by brittle fracture in a lower value of SDR value increases with wheel mesh size.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.10a
• /
• pp.409-412
• /
• 2004

In this paper, an integrated automation system of pattern design and $CO_2$ laser cutting for diving suits is presented. Pattern design includes grading which creates a full-size range from a base pattern. Tool path for laser cutting from the patterns is generated in G-code format. $CO_2$ Laser cutting machine is developed to help cut the patterns with accuracy and speed. Aluminum profiles, ball screws, and stepping motors are engaged into the machine as frame structure, transfer unit, and driving devices respectively. The developed system is tested in dry suit cutting, convincing it can be readily introduced in driving suits manufacturing with respect to cost and efficiency.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1991.11a
• /
• pp.54-58
• /
• 1991

It is well known that metal cutting leaves a plastically deformed layer in the machined surface. This residual phenomenon affects in various forms the physical properties of machined components such as the fatigue strength, the dimensional instability, microcracks, and the stress corrosion cracking. These physical properties, so called surface integrity, are very important for designing highly stressed and critically loaded components. Typical plastic strains in the machined surface are very difficult to measure, since they are located within a very short distance from the surface and they change very rapidly. There is an alternative way to determine the residual strain in plastically deformed materials by measuring the grain size after a subsequent recrystallization process. Although, this technique has been successfully applied by several researchers to find the plastic zone around notches and cracks in various materials and welding beads, few works have been reported using the recrystallization method to determine the residual strains in machined surface. Therefore, the purpose of this investigation Is to explore the effectiveness of the recrystallization technique in machining applications, and in particular, to find the effect of cutting parameters, i.e., depth of cut and rake angle on the plastic strains.

• Proceedings of the Korea Society for Industrial Systems Conference
• /
• 1999.12a
• /
• pp.623-637
• /
• 1999

This study firstly aims to review the discussions among major nations and international organizations on removal of tariff wall in EC. Secondly, it is analyzed how the trend of tariff reduction of removal will affect an individual economy in a partial balance analysis model on an assumed small-size economy. In closing, political implication for removal of tariffs in EC will be presented. The study concluded that tariff removal on Internet EC has both positive and negative effects on the importing economy. It can improve the efficiency in utilization of economic resources by the importing economy in the long term while cut the financial revenue and aggravate the trade balance of importing country. It is inferred from such a conclusion that tariff removal can lead to trade imbalance between the Information haves and the have-nots.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.23 no.5
• /
• pp.1342-1348
• /
• 1998

The major limitation of MOM solution has alaways been the computer CPU time and storage size, needed to carry out the impedance matrix computation. A new formulation technique using Sorce Superimposion method is presented in order to cut down computerstorage requirements and CPU time based on the equivalence principle and induction theorem. The numerical results are shown to give good agreement to those calculated by the conventional method and also application example is presented.

• Journal of Ocean Engineering and Technology
• /
• v.26 no.4
• /
• pp.8-14
• /
• 2012

Two dimensional nesting is a common problem in industries such as the shipbuilding, automotive, clothing, shoe-making, and furniture industries, in which various parts are cut off from stock or packed in a flat space while minimizing waste or unoccupied space. Nesting is known as an NP-complete problem, which has a solution time proportional to the superpolynomial of the input size. It becomes practically impossible to find an optimal solution using algorithmic methods as the number of shapes to nest increases. Therefore, heuristic methods are commonly used to solve nesting problems. This paper presents an expert system that uses a heuristic search method based on an evaluation function for nesting problems, in which parts and stock are represented by pixels. The system is developed in CLIPS, an expert system shell, and is applied to four different kinds of example problems to verify its applicability in practical problems.

• Journal of electromagnetic engineering and science
• /
• v.18 no.4
• /
• pp.215-220
• /
• 2018

This study presents a dual-band polarization-reconfigurable antenna that comprises a large square patch with a pair of corner-cut edges and two small square patches with a shorting via. Two PIN diodes are located between the large square patch and two small square patches. Depending on the bias state applied to the two PIN diodes, each small patch may be disconnected or connected to the large square patch. As a result, the proposed antenna can provide polarization reconfigurability between two orthogonal linear polarizations. Further, the proposed antenna operates at 2.51 GHz and 2.71 GHz. From the measured results, the proposed antenna shows a 10 dB bandwidth of 2.39% (2.49-2.55 GHz) and 2.58% (2.68-2.75 GHz). In this work, the frequency ratio can be easily controlled by changing the size of the small patch.

• Journal of Korean Institute of Industrial Engineers
• /
• v.25 no.1
• /
• pp.8-20
• /
• 1999

In this paper, a design and estimation procedure for the stochastically dependent nonstationary multiple acceptance sampling plans is developed. At first, the rough-cut acceptance and rejection numbers are given as an initial solution from the corresponding sequential sampling plan. A Monte-Carlo algorithm is used to find the acceptance and rejection probabilities of a lot. The conditional probability formula for a sample path is found. The acceptance and rejection probabilities are found when a decision boundary is given. Several decision criteria and the design procedure to select optimal plans are suggested. The formula for measuring performance of these sampling plans is developed. Type I and II error probabilities are also estimated. As a special case, by setting the stage size as 1 in a dependent sampling plan, a sequential sampling plan satisfying type I and II error probabilities is more accurate and a smaller average sample number can be found. In a numerical example, a Polya dependent process is examined. The sampling performances are shown to compare the selection scheme and the effect of the change of the dependency factor.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.13 no.4
• /
• pp.1-8
• /
• 2004

Various controllable parameters of an experiment have influence on grinding process. In order to get good products with a high quality, these parameters should be considered whether each parameter has relations to the quality. This paper describes the use of the design of experiments to minimize geometric error in surface grinding. Controllable parameters for the design of experiments were selected as spindle speed, table speed, depth of cut and grain size. From the experimental results, a degree of influence between these parameters and the geometric error was evaluated. An optimal set of grinding conditions was obtained by means of analysis of variance(ANOVA).

• Journal of the Korean Society for Precision Engineering
• /
• v.16 no.2 s.95
• /
• pp.68-73
• /
• 1999

Generally, most of machining processes are done according to the dimention of the draft made by CAD. However, there are many cases that a sample is given without the draft because of the simplicity of the shape in the machining of 2D objects. To cut the same shape as the given sample, this paper proposes the method to extract the geometric information about a large sample using the robot vision and to draw the demensional draft for the machining. Because the resolution of one frame in the vision system is too low, it is necessary to set up a camera according to the desired resolution and to capture the image moving along the contour. And the overall outline can be compounded of the sequentially captured images. In the experiment, we compared the product after the cutting with the original sample and found that the size of two objects was coincided within the allowed error bound.