• 한국콘텐츠학회논문지
• /
• 제10권7호
• /
• pp.285-296
• /
• 2010

이 연구는 상악 대구치 임상치관의 형태 및 크기를 계측하기 위해 건강한 영구치열을 갖는 C보건대학생 100명을 대상으로 다음과 같은 결론을 얻었다. 1. 임상치관의 교두높이, 치관폭, 치관두께는 좌우 대칭관계를 보였다. 2. 협면구의 강한 발육은 우측 제1대구치에서 우세함을 보였고, 협면소와는 우측 제1대구치에서 높은 출현률을 보였다. 3. 4교두형은 좌 우측 제1대구치에서 100%, 좌 우측 제2대구치에서 각각 78%, 75%로 나타났다. 4. 4교두형일때 원심설측교두 크기는 좌, 우 대칭관계를 보였다. 5. 교두정간 거리는 좌 우측 제1,2대구치 모두 근심 교두정간 거리가 컸다. 6. 카라벨리 교두의 발달은, 좌 우측 모두 제1대구치에서 높은 발육을 보였다. 7. 사주융선의 출현률은 우측 제1대구치에서 87.0%, 우측 제 2대구치에서는 73.0%의 출현율을 보였고, 좌측 제1대구치에서는 88.0%, 좌측 제2대구치에서는 73.0%로 이는 제1대구치에서 약한 치관우식증을 가지고 있는 사람 때문인것으로 사료되었다. 8. 근심변연융선결절 출현율은 좌 우측 모두 제1대구치에서 높은 출현율을 보였다. 원심부 결절은 우측 제1대구치에서 16.0%, 우측 제 2대구치에서 26.0%였고, 좌측 제1대구치에서 14.0%, 좌측 제2대구치에서 21.0%의 출현율을 보였다.

• 대한치과교정학회지
• /
• 제26권5호
• /
• pp.535-546
• /
• 1996

이 연구는 한국인 하악치열궁 형태를 분류하고, 교두정에서 브라켓 높이의 협면점까지 거리를 계측하여 이상적인 호선 제작에 도움을 얻기위하여 시행되였다. 13세에서 25세사이의 정상적인 교합자 159명의 석고모형을 대상으로 순측 및 협측 교두정을 지나는 하악치열궁선에서 견치간, 제1대구치간 및 제2대구치간 폭경과 이들의 고경을 계측한 다음, 유클리안 거리를 이용한 평균군집분석을 시행하여 치열궁형태를 5가지로 분류하고, 각각의 6차 다항식과 결정계수를 구하였으며, 교두정에서 브라켓 높이의 협면점까지의 거리를 계측하고 비교검토하여 다음의 결과를 얻었다. 1. 5가지 하악치열궁선을 실제의 크기로 작도하고, 1형, 2형, 3형, 4형 및 5형으로 명명하였다. 2. 각각의 치 열궁선은 하악 제2대구치간 폭경으로 표현되는 6차다항식과 결정 계수를 산출하였으며 이 식으로 $97\%$이상 설명이 가능하였다. 3. 각 치열궁선의 분포는 5형이 $24.5\%$로 가장 많았으며, 2형과 3형이 각각 $20.8\%$ 1형은 $17.6\%$, 4형은 $16.3\%$의 분포를 보였다. 4. 한국인의 하악치열궁선은 프랑스인에 비하여 폭경이 넓고 고경이 낮은 특성을 보였다. 5. 교두정에서 브라켓높이의 협면점까지의 거리는 절치가 1.0, 견치는 1.9, 제1소구치는 2.6, 제1 및 제2 대구치는 2.7 이였다.

• 대한기계학회논문집
• /
• 제17권8호
• /
• pp.2001-2011
• /
• 1993

This study deals with the machining of sculptured surfaces on 5-axis CNC milling machine with end mill cutter. The study (I) has the following contents. In 5-axis CNC milling, CL-data consist of CC-data and cutter axis direction vector at the CC-point. Thus, in machining of the sculptured surface on 5-axis CNC milling machine, determination of the direction vector of the milling cutter is very important. The direction vector is obtained by the fact that bottom plane of the milling cutter must not interfere with the free-form surface being machined. The interference is checked by the z-map method which can be applied in all geometric types of the sculptured surfaces. After generating NC part programs from 5-axis post-processing algorithms, sculptured surfaces were machined with 5-axis CNC milling machine (CINCINNATI MILACRON, 20V-80). From these machining tests, it was shown that the machining of the free-form surfaces on 5-axis CNC milling machine with the end mill has smaller cusp heights and shorter cutting time than on 3-axis CNC milling machine with the ball-end mill. Thus, 5-axis CNC end milling was effective machining method for sculptured surfaces. The study (II) deals with the prediction of cusp height and the determination of tool path interval for the 5-axis machining of sculptured surfaces on the basis of study(I).

• 대한치과교정학회지
• /
• 제14권2호
• /
• pp.249-261
• /
• 1984

This study was to investigate the fitness of the dental arch line to the parabola, and to estimate correlation between the parabola and some ratios of the dental arch measurements. The sample was consisted of the 64 plaster casts showing normal occlusion which was taken from males and females of Korea, aging from 15 to 18 years. The photos of occlusal surface of the plaster casts were taken, and 38 landmarks on the film were selected. The 3 dental arch lines on each dental arch were imaged. One is the dental arch line passing the points of the most buccal surfaces of the teeth, another is that passing the buccal cusp tips of the posterior teeth and the incisal edges, and the other is that passing the midpoints of the teeth. The landmarks on the film were digitized, and measurements and statistics were performed by the IBM computer. The results were as follows; 1. The fitness of the dental arch to the parabola was very good. The fitness of thor upper dental arch was above $91\%$, and that of the lower dental arch was $93\%$. 2. The dental arch line passing the points of the most buccal surfaces of teeth was best fit to the parabola, the buccal cusp tip arch line and the midpoint arch line in order. 3. Correlation between the ratio of oblique molar dental height to molar width and the parabola was very high. 4. The ratio of oblique molar dental height to molar width was devided into 4 groups by the quartiles, and mean parabolic equations and curves were calculated and drawn.

• 한국정밀공학회지
• /
• 제15권8호
• /
• pp.46-59
• /
• 1998

This paper presents shape design, surface construction, and cutting path generation for the surface of marine ship propeller blades. A propeller blade should be designed to satisfy performance constraints that include operational speed which impacts rotations per minutes, stresses related to deliverable horst power, and the major length of the marine ship which impacts the blade size and shape characteristics. Primary decision variables that affect efficiency in the design of a marine ship propeller blade are the blade diameter and the expanded area ratio. The blade design resulting from these performance constraints typically consists of sculptured surfaces requiring four or five axis contoured machining. In this approach a standard blade geometry description consisting of blade sections with offset nominal points recorded in an offset table is used. From this table the composite Bezier surface geometry of the blade is created. The control vertices of the Hazier surface patches are determined using a chord length fitting procedure from tile offset table data. Cutter contact points and path intervals are calculated to minimize travel distance and production time while maintaining a cusp height within tolerance limits. Long path intervals typically generate short tool paths at the expense of increased however cusp height. Likewise, a minimal tool path results in a shorter production time. Cutting errors including gouging and under-cut, which are common errors in machining sculptured surfaces, are also identified for both convex and concave surfaces. Propeller blade geometry is conducive to gouging. The result is a minimal error free cutting path for machining propeller blades for marine ships.

• 한국자동차공학회논문집
• /
• 제21권2호
• /
• pp.9-16
• /
• 2013

The comparisons of performance characteristics between the super-mirror face grinding machine using variable air pressure developed in this laboratory to grind precisely the sliding face of a surface hardened workpiece with thermal spray and the conventional one are investigated by measuring the surface roughness and hardness for a SCM440. To process variously workpiece according to shape, size and materials, the rotating and contacting forces of the developed grinding machine can be changed by air pressure. The surface roughness of processed workpiece can be also attained to state of mirror face by grinding precisely the sliding face with changing the rotating speed of diamond wheel. It is possible to be attached to the various machine tools because the super-mirror face grinding machine using variable air pressure is a small size. The grinding efficiency is elevated because it can be worked by two or more grinding machines attached to concurrently a machine tool for the large workpiece. In this study, results show that the cusp height of the super-mirror face grinding machine for the particle size of 100 and $1500No./mm^2$ is lower than that of the conventional one because the vibration is reduced by rotating very fast the diamond wheel with a pressed air and it can be processed by rotating the diamond wheel with a constantly varied air pressure perpendicular to workpiece surface, and that the workpiece in the super-mirror face grinding machine for the particle size of $3000No./mm^2$ can be processed to state of mirror face that is rarely seen by the cusp height. It is also found that the surface hardness of both the conventional and the super-mirror face grinding machines are increased as the particle size of diamond wheel is reduced, and the surface hardness of the super-mirror face grinding machine is HRC 1.1 ~ 1.8 higher than that of the conventional one.

• Journal of Oral Medicine and Pain
• /
• 제13권1호
• /
• pp.13-21
• /
• 1988

The author studied the vertical height of tooth crown and the amounts of alveolar bone resorption with age. All 84 subjects(44 male, 40female) who visited Dental hospital of Wonkwang University with no history of sever periodontal disease and no experience of periodontal surgery. 84 subject were divided into 3 groups by age, that is, group I(28-32yrs), group II(38-42yrs), and group III(48-52yrs). Informal radiogram with bite wing film(horizontal angulation : $0^{\circ}$, vertical angulation : $+5^{\circ}~+10^{\circ}$) were taken on premolar and molar area. The distances from cusp tip to cementoenamel junction (vertical height of tooth crown) and from cementoenamel junction alveolar crest(amount of alveolar bone resorption) were measured, and then recorded data from 946 teeth were statistically analysed. This study was undertaken to obtain the data for age estimation by the changes of tooth crown height and alveolar bone resorption in the point of forensic odontology. The obtained results were as follows : 1. The average crown height of mandibular right 1st. molar was 7.1mm in group I, 6.7mm in group II, and 6.6mm group III, and the average amount of alveolar bone resorption on mandibular right 1st. molar were 1.8mm in group I, 2.5mm in group II, and 3.0mm in group III. Ratio of tooth crown height to amount of alveolar bone resorption was 4.0:1 in groupI, 2.7:1 in group II, and 2.2:1 in group III, the ratio was decreased with age. 2. In comparison with upper teeth and lower teeth in ipsilateral side, the average value of tooth crown height and amount of alveolar bone resorption were slightly higher in upper arch than those in lower arch, but there was not a statistically significant difference. 3. The ratio of height of tooth crown to amount of alveolar bone resorption was decreased with age, and which depended mainly upon the change of amount of alveolar bone resorption rather than the change of tooth crown height.

• Journal of Chest Surgery
• /
• 제43권6호
• /
• pp.602-613
• /
• 2010

배경: 사람의 수명이 연장되면서 판막 질환이 점차 증가하는 가운데, 과거에는 심장 판막 이식에 기계 판막을 많이 사용하였으나, 혈액 응고 장애로 인한 출혈, 임신 시 태아의 기형 가능성, 판막의 급성 기계적 작용 부전, 평생 약을 복용해야 하는 불편함 등의 여러 합병증이 동반되는 단점이 있어, 조직 판막 사용이 증가하고 있고, 그 내구성을 높이기 위한 연구와 관심이 점차 증가하고 있다. 현재 사용하는 조직 판막은 외국계 회사의 수입된 제품으로서 그 구조나 도안에 이론적인 제안 등이 부족한 실정이다. 이에 본 연구는 돼지의 대동맥 및 폐동맥 판막의 구조에 대한 기하학적 분석을 시행하고, 각 수치를 계량화, 분석하여 그 3차원적 구조를 이해하여 대동맥 판막과 폐동맥 판막을 만들 수 있는 이론적 배경을 제시하고자 하였다. 대상 및 방법: 도축한 25마리의 돼지에서 채취한 대동맥 판막과 폐동맥 판막을 신선한 상태에서, 그리고 글루타알데하이드(GA) 용액으로 고정한 상태에서 판막의 각 구조물 수치를 2차원적으로 측정하여 그 배율을 계량화하고 분석하였다. 신선한 상태와 글루타알데하이드(GA) 용액으로 고정한 상태에서 판막엽 간 길이, 접합면 간 길이, 판막엽의 높이, 접합면 높이를 각각 측정하였다. 또한 이식 가능한 판막을 제작하기 위하여 스텐트의 도안으로 모양, 유순도에 따른 스텐드의 두께, 높이, 간격 및 판막 크기에 따른 심낭 판막엽의 크기, 모양, 두께 등을 도안하였다. 결과: 돼지 대동맥과 폐동맥 판막의 수치 및 각 구조물들의 배율을 구하였다. 대동맥 판막 및 폐동맥 판막은 각각 우측 관상동맥 첨판 및 우향 관상동맥 첨판의 크기가 상대적으로 제일 컸다. 무접합 관상동맥 첨판이 가장 작았으며(우향 관상동맥 첨판: 무접합 관상동맥 첨판: 좌향 관상동맥 첨판=1.00 : 0.88 : 1.00), 판막의 높이는 첨판의 크기에 비례하였다. 스텐트를 사용한 돼지 대동맥 판막은 외측 직경 크기를 19 mm부터 33 mm까지 정하였고, 이전에 정한 비율 및 스텐트 두께, 그리고 실제 판막 제작에 필요한 봉합 두께와 판막 주변 벽의 두께 등을 고려하여 스텐트의 높이 ($R{\times}1.4$, R: radius, 직경), 폭, 간격 수치를 정하였으며, 심낭을 이용한 판엽은 판막의 직경, 각 첨판 길이 ($2{\times}R$), 높이 ($R{\times}1.4$)와 첨판의 최소 접합면을 고려하여 스텐트 크기와 함께 모양을 도안하였다. 결론: 25개의 돼지 대동맥 판막과 폐동맥 판막의 구조물에 대한 수치를 측정하여 판막들의 기하학적 비율을 계산하고, 여려 크기의 이식형 돼지 대동맥 판막을 만들어 볼 수 있었으며, 또한 소의 심낭을 이용하여 다양한 표기의 판막을 만들어 볼 수 있는 이론적 근거를 만들 수 있었다. 향후 이러한 도안의 판막 제작 후 충분한 생체 내외의 실험 및 추가 연구가 필요할 것으로 생각된다.

• 구강회복응용과학지
• /
• 제17권4호
• /
• pp.257-274
• /
• 2001

To properly prepare teeth, dentists require a direct view of the working area and are often placed in a difficult position, moreover, a high proportion of dentists suffer from headache and back pain. Dentists who make use of the dental mirror and position their patients carefully to gain a proper view report less headache, pain and discomfort in the shoulders. It is recommended that dentists learn the "Home Position(H.P.)" which among the various "Random Position(R.P.)" methods, enables dentists to approach their patients in a stable posture. The purpose of this study was to compare tooth preparation in the H.P. and the R.P., and evaluate the clinical efficacy of the H.P.. Tooth preparation for a full cast crown was performed on the maxillary left 1st molar using the H.P. and the R.P., and the shapes of the prepared tooth surfaces at the two different operating positions were compared. The amount of occlusal reduction, marginal width, height, and axial taper were measured and analyzed. A T-test was performed separately to compare the results of the H.P. and the R.P. with respect to the accuracy of the corresponding tooth reduction. The results were as follows. ; 1. The amount of occlusal reduction was excessive on the mesiobuccal cusp(P<0.05), and deficient on the lingual cusp in the H.P.(P<0.01). In the R.P., this was excessive on the buccal cusp and deficient on the fossa and distolingual cusp(P<0.01). 2. The amounts of marginal width were excessive in all areas except on the lingual and mesial surfaces in the H.P. and lingual surface in the R.P.(P<0.01). 3. The marginal heights were achieved more accurately in the R.P. than the H.P.(P<0.01). 4. Axial surface taper was excessive in all areas in the H.P.(P<0.01). But the axial taper of measured areas was even, and tooth is more like to retain its original axis after reduction. In the R.P., axial surface taper was excessive on the mesial and buccal area, and deficient on the distolingual area(P<0.01), and therefore, the axis of the prepared teeth was tipped in the distolingual direction. 5. The times needed for preparation were 12 minutes and 49 seconds in the H.P., and 11 minutes and 35 seconds in the R.P., and the R.P. was statistically faster(P<0.01). The tooth preparation in the H.P. achieved its goal, in that it enabled the operator to make even tooth reduction. In conclusion, the H.P. system offers an improved method that can be used in clinic after specific training.

• 대한치과기공학회지
• /
• 제24권1호
• /
• pp.107-126
• /
• 2002

The first function of occlusion is mastication. Therefore the functional restoration of occlusal surface is very important. The restoration of occlusal surface is three method as wax bite technique, F.G.P. technique, cone technique. Many dental technician is using compound method. I am using compound method of wax bite technique and cone technique. I have knew common point on each teeth during I have waxing up wax pattern. So I studied on the design waxup technique for mandible molar occlusion. The results of the study were as follows; 1. The dam wax up method can restore axial contour of teeth very easy and make short working time of wax pattern. 2. The height of dam must be same with cusp of adjacent teeth. 3. Automatically the contour of tooth is appeared if the contour of dam is relationship with cuspid line of adjacent teeth. 4. The height of contour of buccal, lingual surface is formed natural curve to add fluid wax by gravitation. 5. The development groove of mandible first premolar is appeared V form. 6. The development groove of mandible second premolar is appeared Y form. 7, The development groove of mandible first molar is appeared M form. 8. The development groove of mandible second molar is W form. 9. The embrasure is formed to carve around contact point area as round convex. It affects to axial form of tooth. 10. The buccal, lingual groove of molar is formed parallel with direction of teeth arrangement.