• 한국생산제조학회지
• /
• 제19권2호
• /
• pp.251-259
• /
• 2010

It is presented in this study a new efficient intelligent machining strategy, which can be used to remove the uncut volume at the boundary region of curved surfaces caused by cutter interference. The geometric form definitions and recognition of topological features of the surface triangulation mesh are used to generate cutter paths along successive and interconnected steepest pathways, that minimize the cusp height left after flat end milling. In order to machine the uncut volume gradually, the z-map cutter centers are adjusted to avoid cutter interference for the 6 kinds of avoidance types. And then, the generative subsequent paths are sequenced to determine the second step cutter paths for the next uncut volume. For the 2 kinds of test models with convex and concave surface region, the implemented software algorithm is evaluated by investigating the residual swelling of uncut volume for each machining step.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2005년도 추계학술대회 논문집
• /
• pp.152-155
• /
• 2005

A method of three-dimensional curved surface generation was studied for multi-point dieless forming (MPDF) in the shipbuilding industry. Three-dimensional coordinates of punch elements were obtained from objective surfaces using a proprietary CAD program. MPDF surfaces were generated by adjusting the height of punch elements in accordance with the coordinates. Some problems, such as collision of punch elements and contact between plates and punch bodies, were anticipated from the analysis of the results. A twisted surface was formed successfully by MPDF in a laboratory scale, which suggests possibility of application of the technology to the shipbuilding industry.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2003년도 The Fifth Asian Computational Fluid Dynamics Conference
• /
• pp.279-280
• /
• 2003

• 대한기계학회논문집A
• /
• 제29권1호
• /
• pp.1-13
• /
• 2005

Kinematics of grasping and manipulation by a multi-fingered robotic hand where multi-fingertip surfaces are in contact with an object is solved. The surface of the object was represented by B-spline surfaces in order to model the objects of various shapes. The fingers were modeled by cylindrical links and a half ellipsoid fingertip. Geometric equations of contact locations have been solved for all possible contact combinations between the fingertip surface and the object. The simulation system calculated joint displacements and contact locations for a given trajectory of the object. Since there are no closed form solutions for contact or intersection between these surfaces, kinematics of grasping was solved by recursive numerical calculation. The initial estimate of the contact point was obtained by approximating the B-spline surface to a polyhedron. As for the simulation of manipulation, exact contact locations were updated by solving the contact equations according to the given contact states such as pure rolling, twist-rolling or slide-twist-rolling. Several simulation examples of grasping and manipulation are presented.

• Computers and Concrete
• /
• 제4권1호
• /
• pp.49-66
• /
• 2007

The objective of this paper is to provide experimental data on the propagation of curved crack-surfaces and the respective load-displacement diagrams for the validation of numerical models for cracking of concrete, subjected to three-dimensional stress states. To this end beam-shaped specimens are subjected to combined bending and torsional loading, leading to the formation of a spatially curved crack-surface. The experimental data contain the evolution of the load and of the strains at selected points in terms of the crack mouth opening displacement and the propagation of the crack surface.

• 한국측량학회지
• /
• 제34권3호
• /
• pp.243-251
• /
• 2016

일반적으로 라이다 데이터 처리 과정은 노이즈 제거, 지표면/비지표면 분리를 위한 필터링, 데이터 분류, 객체분할, 형태인식, 객체 모델링, 성과물에 대한 정확도 검증 등이다. 본 논문은 점군집 라이다 데이터를 이용한 3차원 곡면객체의 모델링과 정확도 검증에 중점을 두고 있다. 기존의 구형 및 원통형 객체 모델링 방법은 함수의 선형화, 미지계수의 초기 근사값 및 반복 계산이 요구되지만, 제안한 방법은 모델링 함수의 미지계수를 직접 결정하는 방법이다. 이를 위하여 객체를 형성하는 단위 객체면 형태를 분석하여 적합한 함수를 결정하고, 함수를 구성하는 미지변수를 추정한 후 정확도를 분석하여 타당성을 검증하였다. 제안한 방법을 반구형 및 반원통의 시뮬레이션 및 실제 건물 데이터에 적용하여 모델링 함수의 계수와 정확도를 산정하였으며, 다양한 형태의 객체 모델링의 자동화에 기여할 것으로 판단된다.

• 공학논문집
• /
• 제2권1호
• /
• pp.63-71
• /
• 1997

본 논문에서는 range 데이터로부터 평면, 또는 곡면을 갖는 물체의 표면을 인식하여 matching시키는 단순하고 효율적인 방법을 제안한다. 물체의 해당 면을 인식하기 위해 단순히 물체의 면을 나타내는 고유 값만을 비교하기 때문에 인식에 따르는 불필요한 절차를 줄일 수 있다. 여기서, 사용되는 물체의 면을 나타내는 고유값(SRV)은 그 물체의 view-point에 독립적인 특징들에 대하여 가중치를 부여한 값들의 합으로 얻어진다. 따라서, 이 방법은 단순하고 효율적이며 센서에 얻어진 데이터의 잡음과 occlusion에 덜 민감하다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2000년도 봄 학술발표회 논문집
• /
• pp.457-464
• /
• 2000

Stereographic method is a general and basic method to analyse sliding failure potential of rock slope. Region of failure analysis using stereographic method extend to curved slope from straight slope in this paper, Curved slope is defined as the multi-face slope with free surface more than two face and has different characteristics from straight single face slope. Individual daylight envelopes of free surfaces are combined into total daylight envelope of multi-face slope. So, sliding envelope of multi-face slope is the daylight envelope except friction cone. Specially, If only single joint set is developed in the slope, single plane sliding(or plane failure) is impossible in the single-face straight slope, but possible in the multi-face slope. In the multi-face slope with only one joint set, single plane sliding occurs when orientation of sliding plane is between two side slope orientation in the sliding envelope.

• 한국정밀공학회지
• /
• 제17권4호
• /
• pp.69-80
• /
• 2000

Generally, die polishing is a lime consuming process, resulting in 30∼50％ of the whole die manufacturing time. However, die polishing has not been automated yet, since it needs a great deal of experience and skill. This paper describes a new development of automated system for die polishing and focuses on the successful achievements of the element techniques to realize from hand skill to automation, as followings: (1) The 5 axes polishing system by the aid of robot with 2 degrees of freedom, is developed for the application of curved surface die. (2) The CAM system realizes a 5 axes tool path control for polishing and measuring. (3) The conductive elastic tool is able to meet curved surfaces of die and gives a high efficient and quality polishing characteristics. (4) The surface roughness measurement device with noncontact laser is developed and has a high reliability without surface damage.

• Applied Science and Convergence Technology
• /
• 제25권5호
• /
• pp.92-97
• /
• 2016

Surface erosion using focused ion beam irradiation is the most promising technology for the realization of micro/nanofabrication. However, accurate fabrication of predefined structures is still challenging. This article introduces a single step surface driving method to fabricated predefined curved structures. The previously reported multi step surface driving method (MSDM) has been modified so that a single ion dose profile can be used instead of multiple ion dose profiles. Experimental realization of the method is presented with the fabrication of predefined curved surfaces as well as reference to surface propagation theory. For the purpose of verification, simulations are performed on the basis of a sound mathematical model.