• Water Engineering Research
• /
• v.4 no.1
• /
• pp.45-58
• /
• 2003

Two-dimensional depth-averaged advection-dispersion equation was simulated using FEM. In the straight rectangular channel, the advection-dispersion processes are simulated so that these results can be compared with analyti-cal solutions for the transverse line injection and the point injection. In the straight domain the standard Galerkin method with the linear basis function is found to be inadequate to the advection-dispersion analysis compared to the upwind finite element scheme. The experimental data in the S-curved channel were compared with the result by the numerical model using SUPG(Streamline upwind Petrov-Galerkin) method.

• Advances in aircraft and spacecraft science
• /
• v.6 no.1
• /
• pp.19-30
• /
• 2019

Two- and three-dimensional turbulent airflows in a 9-degrees-bent channel are studied numerically. The inner surfaces of upper and lower walls are parallel to each other upstream and downstream of the bend section. The free stream is supersonic, whereas the flow at the channel exit is either supersonic or subsonic depending on the given backpressure. Solutions of the Reynolds-averaged Navier-Stokes equations are obtained with a finite-volume solver ANSYS CFX. The solutions reveal instability of formed shock waves and a flow hysteresis in considerable bands of the free-stream Mach number at zero and negative angles of attack. The instability is caused by an interaction of shocks with the expansion flow formed over the convex bend of lower wall.

• Journal of Biomedical Engineering Research
• /
• v.36 no.5
• /
• pp.221-227
• /
• 2015

In this study, Multi-Array Electrodes (MAE) and Programmable Multi-channel Electrical Stimulator (PMES) were implemented for firing Trigger Points (TPs) of the patient with Myofascial Pain Syndrome (MPS). MAE has 25 Ag/AgCl electrodes arranged in the form of array ($5{\times}5$) fabricated with flexible pad, which are applicable to be easy-attached to curved specific region of the human body. PMES consisted of 25 channels. Each channel was to generate various electric stimulus patterns (ESPs) by changing the mono-phasic or bi-phasic of ESP, On/Off duration of ESP, the interval between ESP, and amplitude of ESP. PMES hardware was composed of Host PC, Stimulation Pattern Editing Program (SPEP), and Multi-channel Electrical Stimulator (MES). Experiments were performed using MAE and PMES as the following. First experiment was performed to evaluate the function for each channel of Sub- Micro Controller Unit (SMCU) in MES. Second experiment was conducted on whether ESP applied from each channel of SMCU in PMES was focused to the electrode set to the ground, after applying ESP being output from each channel of SMCU in PMES to MAE.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.43 no.1
• /
• pp.1-7
• /
• 2015

This paper predicts the spring-in effect of curved laminated composite structure for various stacking sequence using finite element analysis(ABAQUS). In composite manufacturing process, large temperature difference, different coefficient of thermal expansion and chemical shrinkage effect cause distortion of composite parts such as spring-in and warpage. Distortion of composite structure is important issue on quality of product, and it should be considered in manufacturing process. In finite element analysis, a CHILE(Cure Hardening Instantaneously Linear Elastic) model and chemical shrinkage effects are considered developing user subroutine in ABAQUS and some cases are simulated.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.17 no.3
• /
• pp.47-55
• /
• 2013

Curved duct channel flow characteristics for non-Newtonian gel fluid is investigated. A simulant gel propellant mixed by Water, Carbopol 941 and NaOH solution has been chosen to analyze the gel propellant flow behavior. Rheological data have been measured prior to the flow analysis where water-gel propellant and water-gel propellant with $Al_2O_3$ nano particles are both used. The critical Dean number examined by the numerical simulation in the U-shape duct flow reveals that although water-gel-nano propellants have higher apparent viscosity, the critical Dean number do show no notable difference for both the two gel propellant. It is found that the power-law index may be a dominant parameter in determining the critical Dean number and that the gel with particles addition may be more vulnerable to Dean instability.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.19 no.6
• /
• pp.36-42
• /
• 2020

Nowadays, the touch screen panel (TSP) cover glass for mobile smart devices is being developed with a curved glass shape due to different design requirements. Because the sizes of mobile smart devices continue to increase, there has also been a great increase in the demand for large-area curved glass greater than 20 inches. In this study, heat and fluid flow analysis using CFD was performed to optimize the heating surface temperature distribution of the large curved glass formation system. Five cooling water flow paths in the cooling block were designed and analyzed for each case. A function that can quantitatively calculate the temperature uniformity of the heating surface was proposed and these values were obtained for the five models. The temperature distributions of the heating surface and the energy consumption of the heating system were also compared and comprehensively analyzed. Based on the analysis results of the five different cooling channel path models, the optimal path design could be presented.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.6 no.4 s.23
• /
• pp.57-65
• /
• 2006

In this study, hydraulic model same as natural channel with junction area and curved reach is constructed, and after that the variation of difference of the water surface elevation at cross section in junction area is analyzed using constructed hydraulic model. In junction area, the variation of maximum water level based on downstream section is more affected in discharge ratio at upstream than downstream. The maximum water level increased as closed to junction and the peak level appeared at just downstream of junction. The slope of water elevation at cross section is affected in section shape and decreased as discharge ratio is reduce. The expressed formulas developed in the channel consist of constant curvature and section shape showed difference of 60% with measured value, but the suggested formula in this study to compute difference of water surface elevation showed difference of 10% with measured value.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.7
• /
• pp.1475-1482
• /
• 2009

In this paper, a computer simulation is developed for isotachophoretic protein separation in a serpentine micro channel for optimal lab on a chip design using 2D Finite Element Method. This 2D ITP model is composed of 5 components such as hydrochloric acid as Leader, caproic acid as terminator, acetic acid and benzoic acid as two proteins, and histindine as background electrolyte. The computer model is based on mass conservation equation for 5 components, charge conservation equation for electric potential, and electro neutrality condition for pH calculation. For the validation of the 2D spatial ITP model, the results are compared with the Simul5 developed by Bohuslav Gas Group. The simulation results are in a good agreement in a ID planar channel. This proves the precision of our model. The 2Dproteinseparation is conducted in a 2D curved channel for Lab on a chip design and dispersions of proteins are revealed during the electrophoretic process in a curved shape.

• Transactions of Materials Processing
• /
• v.14 no.2 s.74
• /
• pp.139-144
• /
• 2005

It was investigated that curved aluminum products with 'ㄷ' section or with 'h' section could be bended during extrusion by the extru-bending process. In order to make bending at the exit section of die, the flow of billet inside die cavity was controlled by the shape of billet. As results of the analysis of $DEFORM^{™}-3D$, it was known that the bending phenomenon at the die exit can be happened by the asymmetric section of billet. And it was known by the experiment with plasticine or aluminum material that an symmetric product with 'c' channel section and the product with flanged 'h' section could be bended because of asymmetric shape of billet.

• Journal of Wetlands Research
• /
• v.10 no.2
• /
• pp.67-79
• /
• 2008

The one-dimensional (1D) finite-difference method (FDM) with Abbott-Ionescu scheme and the two-dimensional (2D) finite-volume method (FVM) with an approximate Riemann solver (Osher scheme) for unsteady flow calculation in river are described. The two models have been applied to several problems including flow in a straight channel, flow in a slightly meandering channel and a flow in a meandering channel. The uniform rectangular channel was employed for the purpose of comparing results. A comparison is made between the results of computation on 1D and 2D flows including straight channel, slightly meandering channel and meandering channel application. The implementation of the finite-volume method allows complex boundary geometry represented. Agreement between FVM and FDM results regarding the discharge and stage is considered very satisfactory in straight channel application. It was concluded that a 1D analysis is sufficient if the channel is prismatic and remains straight. For curved (meandering) channels, a 2D or 3D model must be used in order to model the flow accurately.